Showing 1-10 of 785 results

Browse for 0.5 Brass Coupling best prices at RankeDeal.com

  • Anderson Metals Brass Pipe Fitting, Coupling, 1/2" Female

    The Anderson Metals coupling pipe fitting is made of red brass and has female National Pipe Taper (NPT) threaded connections. This coupling fitting connects two pipes going in the same direction with the same diameter to extend a straight run. It has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. This fitting is made from red brass for high strength, better corrosion resistance than stainless steel, and greater ease in machining than yellow brass. The operating temperatures for this fitting range from -53 to 121 degrees C (-65 to 250 degrees F). This fitting meets American Society for Testing and Materials (ASTM) B584 and American Society of Mechanical Engineers (ASME)/American National Standards Institute (ANSI) B16 specifications for quality assurance.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, fo...

    • ASIN: B0041NM0IC
    • Brand: Anderson Metals
    • ASIN: B0041NM0IC
    • UPC: 719852917915
    • Part No: 38103-08

  • Anderson Metals Brass Tube Fitting, Coupling, 1/2" Flare x 1/2" Female Pipe

    This Anderson Metals coupling compression tube fitting is made of brass, has a flared tube connection and a female NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect two tubes of the same diameter in a straight run. It has a flared tube connection on one end and a female National Pipe Taper (NPT) connection on the other, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This coupling compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, an...

    • ASIN: B002SAS52K
    • Brand: Anderson Metals
    • ASIN: B002SAS52K
    • UPC: 719852935018
    • Part No: 54046-0808

  • Stainless Steel 304 Cast Pipe Fitting, Coupling, Class 150, 1/2" NPT Female

    The Merit Brass class 150 coupling is a stainless steel 304 cast pipe fitting with female National Pipe Taper (NPT) threads for connecting and extending pipes going in the same direction. Made of stainless steel 304, the low carbon content of this fitting ensures higher corrosion resistance than 302 grade steel. The coupling has NPT threads for creating tighter seals than straight threads. This class 150 fitting meets standards ANSI B1.20.1 and ISO 49 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. Family-owned since 1937, the company is based in Cleveland, OH. Merit Brass distributes pipe fittings to the United States and Canada.

    • ASIN: B003GSKXUU
    • Brand: Merit Brass
    • ASIN: B003GSKXUU
    • Part No: KP411-08

  • Anderson Metals Brass Hose Fitting, Union, 1/2" x 1/2" Barb

    This Anderson Metals union coupling is made of brass and connects two hoses with the same diameter in a straight run. This coupling has barbed connections on both ends for connecting two hoses. The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included). This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

    • ASIN: B003CEQRGW
    • Brand: Anderson Metals
    • ASIN: B003CEQRGW
    • UPC: 719852936374
    • Part No: 57014-08

  • Lead Free Brass Pipe Fitting, Coupling, Class 125, 1/2" NPT Female

    The Merit Brass class 125 coupling is a lead-free brass pipe fitting with female National Pipe Taper (NPT) threads for connecting and extending pipes going in the same direction. It has female NPT threads for connecting to male pipes with a tighter seal than straight threads. Lead-free brass is comparable in strength to stainless steel and is more corrosion resistant. This class 125 fitting meets standards ASTM B-584-06 (C89833), ANSI B 1.20.1, and ANSI B 16.15 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. Family-owned since 1937, the company is based in Cleveland, OH. Merit Brass distributes pipe fittings to the United States and Canada.

    • ASIN: B003OYJEY2
    • Brand: Merit Brass
    • ASIN: B003OYJEY2
    • UPC: 671404119980
    • Part No: XNL111-08

  • Anderson Metals 56122 Brass Pipe Fitting, Hex Nipple, 1/2" x 1/2" NPT Male Pipe

    This Anderson Metals 56122 hex nipple is a brass pipe fitting with 3/8" male NPT threads. The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. It has male National Pipe Taper (NPT) threads for connecting to female threaded pipes, creating a tighter seal than straight threads. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The fitting has an operating temperature range of -65 to +250 degrees F. This fitting meets American Society for Testing and Materials (ASTM) B584 and American Society of Mechanical Engineers (ASME)/American National Standards Institute (ANSI) B16 specifications for quality assurance.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe ...

    • ASIN: B000BQY9XW
    • Color: Original Version
    • Brand: Anderson Metals
    • ASIN: B000BQY9XW
    • UPC: 719852920335
    • Part No: 56122-08

  • Pexflow EPCP0012-10 PEX X PEX Straight Coupling Barb Pipe Fitting, 1/2", Brass (10 pack)

    The Pexflow PEX Barb Coupling (10-Pack) is an easy to install, low cost solution to connect PEX Pipe. Pexflow PEX Barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamp system or the copper crimp ring system (both sold separately). The Pexflow PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.

    • ASIN: B07GXY6Z3H
    • Color: Brass (10 pack)
    • Brand: PEXFLOW
    • ASIN: B07GXY6Z3H
    • UPC: 804595279809
    • Part No: EPCP0012-10

  • Anderson Metals Brass Pipe Fitting, Adapter, 1/2" Male Pipe x 1/2" Female Pipe

    The Anderson Metals adapter pipe fitting is made of brass and has a male National Pipe Taper (NPT) threaded connection and a female NPT threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has male NPT threads on one end and female NPT threads on the other for connecting to a female and a male threaded pipe or fitting. The NPT threads create a tighter seal than straight threads. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The operating temperatures for this fitting range from -53 to 121 degrees C (-65 to 250 degrees F). This fitting meets American Society for Testing and Materials (ASTM) B584 and American Society of Mechanical Engineers (ASME)/American National Standards Institute (ANSI) B16 specifications for quality assurance.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes...

    • ASIN: B000BQY8E2
    • Brand: Anderson Metals
    • ASIN: B000BQY8E2
    • UPC: 719852920304
    • Part No: 56120-0808

  • Anderson Metals Brass Pipe Fitting, Coupling, 1/2" x 1/2" Female Pipe

    The Anderson Metals coupling pipe fitting is made of brass and has female National Pipe Taper (NPT) threaded connections. This coupling fitting connects two pipes going in the same direction with the same diameter to extend a straight run. It has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The operating temperatures for this fitting range from -53 to 121 degrees C (-65 to 250 degrees F). This fitting meets American Society for Testing and Materials (ASTM) B584 and American Society of Mechanical Engineers (ASME)/American National Standards Institute (ANSI) B16 specifications for quality assurance.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).Anderson Metals manufactures brass fittings, va...

    • ASIN: B000LWXB44
    • Brand: Anderson Metals
    • ASIN: B000LWXB44
    • UPC: 719852936862
    • Part No: 56103-08

  • Dixon Valve & Coupling HHP4M Brass Fitting, Hex Head Plug, 1/2" NPT Male

    Dixon Valve hex head plug. Made of brass. 1/2-inches NPT male. Hex head plug is hollow.

    • ASIN: B00DE7KZ7Y
    • Brand: Dixon Valve & Coupling
    • ASIN: B00DE7KZ7Y
    • Part No: HHP4M

  • 0.5 x 0.37 in. Brass Barb Pex Coupling

    • ASIN:
    • Model: HO574224
    • Color: BrassMulticolor