Showing 1-10 of 193 results

Browse for 1 Micron Nominal Filter Cartridge best prices at RankeDeal.com

  • Ronaqua 2S1M-20BB 1 Micron 20-Inch Big Blue Whole House Water Filter Sediment, 2-Pack

    2 of Melt-blown Polypropylene Sediment filters -20" Big Blue Sediment filter is often the first filter installed in the Whole House Water Filter. Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. The main function of a sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. Removal of such particles allows for a better performance of all the following filters, such as Carbon Block or GAC filters. Those filters are fit all 20" Big Blue Water Filter Housings. Product Features -Individually wrapped -Flow rate: 5 GPM -Filter life: 10,000 gallons -Operating Temperature: 39°F~125°F (4°C~52°C) -Max. Operating Pressure: 60 psi -Removes dust, particles, and rust -Good for water filters and aquariums Applications -Food and beverages -Reverse Osmosis Pre filtration -Oil and gas -Fine chemicals -Electronics -Metal finishing -Pulp and paper Micron rating: 1 Micron Dimensions: 20" x 4.5" This filters are wrapped and sealed and meet NSF Standards and Regulations

    • ASIN: B01J4BI57A
    • Color: White
    • Brand: Ronaqua
    • ASIN: B01J4BI57A
    • UPC: 780347035513
    • Part No: 2S1M-20BB

  • Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron

    This Pentek ChlorPlus 10 carbon block filter cartridge reduces chlorine and chloramine in residential and commercial drinking water. It has nominal filtration rating of 1 micron at an efficiency of 85%. The cartridge is made of bonded powdered activated carbon (PAC) media with a polyolefin core and shell and polyethylene outer netting. A Santoprene gasket provides a watertight seal. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 50,000 gallons at a flow rate of 1 gallon per minute (gpm), and reduce 3 ppm chloramines by at least 75% in up to 1,000 gallons at a flow rate of 1 gpm. The filter has an initial pressure drop of 6 pounds per square inch (psi) at a recommended flow rate of 1 gpm, and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This carbon block filter cartridge is used for treatment of residential and commercial drinking water.Specifications Nominal filtration rating 1 micron Initial pressure drop at 1 gpm 6 psi Chlorine reduction capacity 50,000 gallons at 1 gpm Chloramine reduction capacity 1,000 gallons at 1 gpm Operating temperature range 40 to 125 degrees F (4.4 to 51.7 degrees C) Maximum dimensions (H x W) 9-3/4 x 2-7/8 inches (248 x 73 mm) The nominal filtration ratin...

    • ASIN: B0051VC7CW
    • Color: White with Blue Ends
    • Brand: Pentek
    • ASIN: B0051VC7CW
    • UPC: 638845886017
    • Part No: 255416-43

  • Pentek DGD-2501-20 Spun Polypropylene Filter Cartridge, 20" x 4-1/2"

    This Pentek DGD-2501-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 25 microns, and the rating of the post-filter layer is 1 micron. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.SpecificationsNominal filtration rating (pre-filter)25 micronsNominal filtration rating (post-filter)1 micronInitial pressure drop at 20 gpm

    • ASIN: B00207SAEY
    • Color: White Body
    • Brand: Pentek
    • ASIN: B00207SAEY
    • UPC: 851905131418
    • Part No: 155360-43

  • Pentek ECP1-BB Pleated Cellulose Polyester Filter Cartridge, 9-3/4" x 4-1/2", 1 Micron

    This Pentek ECP5-BB pleated cellulose polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 1 micron at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated cellulose polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.SpecificationsNominal filtration rating1 micronInitial pressure drop at 20 gpm

    • ASIN: B0030ZHB0Y
    • Color: White
    • Brand: Pentek
    • ASIN: B0030ZHB0Y
    • UPC: 132017512679
    • Part No: 255489-43

  • 3PP-10B 1-Micron Big Blue Whole House Water Filter Sediment, 10-Inch, 3-Pack

    3 of Melt-blown Polypropylene Sediment filters -10" Big Blue Sediment filter is often the first filter installed in the Whole House Water Filter. Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. The main function of a sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. Removal of such particles allows for a better performance of all the following filters, such as Carbon Block or GAC filters. Those filters are fit all 10" Big Blue Water Filter Housings. Product Features -Individually wrapped -Flow rate: 5 GPM -Filter life: 10,000 gallons -Operating Temperature: 39°F~125°F (4°C~52°C) -Max. Operating Pressure: 60 psi -Removes dust, particles, and rust -Good for water filters and aquariums Applications -Food and beverages -Reverse Osmosis Pre filtration -Oil and gas -Fine chemicals -Electronics -Metal finishing -Pulp and paper Micron rating: 1 Micron Dimensions: 10" x 4.5"This filters are wrapped and sealed and meet NSF Standards and Regulations

    • ASIN: B01G2MWVC4
    • Color: White
    • Brand: Ronaqua
    • ASIN: B01G2MWVC4
    • UPC: 780347035322
    • Part No: 3PP-10B 1-Micron

  • Pentek ECP5-BB Pleated Cellulose Polyester Filter Cartridge, 9-3/4" x 4-1/2", 5 Microns

    This Pentek ECP5-BB pleated cellulose polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated cellulose polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.SpecificationsNominal filtration rating5 micronsInitial pressure drop at 20 gpm

    • ASIN: B003H26I54
    • Color: White
    • Brand: Pentek
    • ASIN: B003H26I54
    • UPC: 807032972639
    • Part No: 255490-43

  • Pentek ECP1-20BB Pleated Cellulose Polyester Filter Cartridge, 20" x 4-1/2", 1 Micron

    This Pentek ECP1-20BB pleated cellulose polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 1 micron at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated cellulose polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.SpecificationsNominal filtration rating1 micronInitial pressure drop at 20 gpm

    • ASIN: B0030ZUIXG
    • Color: White
    • Brand: Pentek
    • ASIN: B0030ZUIXG
    • UPC: 808112760450
    • Part No: 255493-43

  • Pentek ECP20-BB Pleated Cellulose Polyester Filter Cartridge, 9-3/4" x 4-1/2", 20 Microns

    This Pentek ECP20-BB pleated cellulose polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 20 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated cellulose polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.SpecificationsNominal filtration rating20 micronsInitial pressure drop at 20 gpm

    • ASIN: B0030Z86Z8
    • Color: White
    • Brand: Pentek
    • ASIN: B0030Z86Z8
    • UPC: 700999877811
    • Part No: 255491-43

  • Pentek PD-1-20 Polypropylene Filter Cartridge, 20" x 2-1/2", 1 Microns

    This Pentek PD-1-20 polypropylene filter cartridge reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. It has a nominal filtration rating of 1 micron at an efficiency of 85%. The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release. It has an initial pressure drop of less than 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 175 degrees F (4.4 to 79.4 degrees C). This polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications.SpecificationsNominal filtration rating1 micronInitial pressure drop at 5 gpm

    • ASIN: B007KDZ0C8
    • Color: White
    • Brand: Pentek
    • ASIN: B007KDZ0C8
    • UPC: 051678755433
    • Part No: 155755-43

  • Pentek R30-20BB Pleated Polyester Filter Cartridge, 20" x 4-1/2", 30 Microns

    This Pentek R30-20BB pleated polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 30 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.SpecificationsNominal filtration rating30 micronsInitial pressure drop at 10 gpm

    • ASIN: B0030ZP8AE
    • Brand: Pentek
    • ASIN: B0030ZP8AE
    • UPC: 115971041126
    • Part No: 155430-43