Showing 1-10 of 839 results

Browse for 20 Lb Grease Trap best prices at RankeDeal.com

  • John Boos GT-8 Carbon Steel Grease Interceptor

    Injection molded in engineered thermoplastics. Will not corrode, chip, or peel, not even under the most severe applications. One piece tank design - compact, durable, user-friendly solution. Lightweight and strong: weighs up to 60 percent less than metal interceptors. Can be installed in-floor, on-floor, or semi-recessed. Measurements: 14.2" long by 11.29" tall by 10.5" wide; 2" from top to pipe opening, 8.1" from pipe opening to base. 4 lbs G.P.M capacity. 8 lbs Grease capacity. Both ends accept no-hub adapters for steel or plastic. T-vent pipe included. C IAPMO compliant models: GT8-GT30; UPC compliant models: GT40-GT100.

    • ASIN: B0044I54VO
    • Color: Stainless Steel
    • Brand: John Boos
    • ASIN: B0044I54VO
    • UPC: 662969040741
    • Part No: GT-8

  • Commerical Grade Carbon Steel Grease Trap 20 lb PDI Approved

    Commerical Grade Carbon Steel Grease Trap 20 lb PDI Approved FLOW RATE: 10GPM CAPACITY: 20LBS LENGTH: 21" WIDTH: 16 1/2" HEIGHT: 13" INLET&OUTLET: 2" L&J Grease Interceptors serve to help protect municipal sewer, drainage and water treatment facilities from being obstructed, damage or disabled by fat-,oil-,grease-laden waster water discharged by commercial kitchen.  Unit Includes non-slips cover, securing bolt, flow diffusing baffle. PDI approved.

    • ASIN: B01MU9SZKM
    • Color: Silver
    • Brand: L and J
    • ASIN: B01MU9SZKM

  • BEAMNOVA Commercial Grease Trap 25lbs 13GPM Gallons Per Minute Stainless Steel Interceptor for Restaurant Kitchen

    This is a 25 lb 13 GPM Grease Trap. Durable kits for kitchen or restaurant! Buy with confidence! How it works: Grease traps work on the basic principal that FOG's (Fats, Oils & Grease) float on water and solid particles sink. As the inflow of waste water from the sinks enters the grease trap the fats, oils and greases rise to the surface and is trapped between the baffle plates. The baffles on the outlet prevents FOG's from flowing directly through the unit. These FOG's are retained within the unit along with food particles and clean water flows under the baffle plates through the unit to drain. The retained waste collected within the unit can be easily removed at regular intervals using the removable fine mesh filter. Installation: Our Grease Traps are delivered fully assembled and couldn't be easier to install. Just connect the pipe run from the sinks and dishwasher to the Grease Trap inlet. Then pipe the Grease Trap outlet directly to drain. We recommend solvent weld pipe is used for a secure fit. Also make sure the trap is on the flat floor. Specifications:25 lb Grease Trap- 13 Gallons Per Minute (G.P.M.) Weight: 25 lbs. Material: Heavy Duty 1.2mm Thickness 201 Stainless Steel Removable Baffles for Ease of Maintenance Cover locking deviceOverall dimensions: 24" L...

    • ASIN: B01CZM4N8K
    • Color: Side Inlet
    • Brand: BEAMNOVA
    • ASIN: B01CZM4N8K
    • UPC: 606280032481
    • Part No: 70019575

  • WentWorth 40 lb Grease Trap 20 GPM Gallons Per Minute Steel Interceptor for Restaurant Kitchen

    SpecificationsModel: WP-GT-20Weight: 92 lbs.Material: Heavy Duty 11 gauge Carbon SteelPowder Coated Gray - Corrosion ResistantOverall dimensions: 24-1/2" L x 15-13/16" W x 15" H Bottom To Center Of Opening: 11.5"31/2" Inlet and outlet pipeFloor Mount: YesPDI CertifiedGrease Trap Sizing Formula: GT = CS x 0.4 GT = Minimum grease trap rating in gallons per minute, CS = Capacity in gallons of fixtures or sink to be discharged to the grease trapInstallationRemove the flow control tee from inside the interceptorLocate the interceptor "inlet" and "outlet", position inlet closest to the equipment that the interceptor will be servicingInstall the flow control tee between equipment and inlet valve on the interceptorVent the flow control tee to ensure optimal performance of your interceptorReplace the lid and securely tighten retaining lid boltCheck integrity of connection to the interceptor and repair any leaks as neededMaintenanceOne week after installation, check the grease level inside the interceptor. These results should be used to determine the appropriate cleaning schedule to be used for future cleaning.To clean, simply remove the lid and then extract or skim the grease into an empty container. Replace the lid and secure the retaining bolt.Refer to local codes and regulations conce...

    • ASIN: B0084785A8
    • Color: Silver
    • Brand: WentWorth
    • ASIN: B0084785A8
    • UPC: 091037247476
    • Part No: WP-GT-20

  • Commerical Grade Carbon Steel Grease Trap 30 lb PDI Approved

    Commerical Grade Carbon Steel Grease Trap 30 lb PDI Approved FLOW RATE: 15GPM CAPACITY: 30LBS LENGTH: 23.75" WIDTH: 16 1/2" HEIGHT: 17.75" INLET&OUTLET: 3" L&J Grease Interceptors serve to help protect municipal sewer, drainage and water treatment facilities from being obstructed, damage or disabled by fat-,oil-,grease-laden waster water discharged by commercial kitchen.  Unit Includes non-slips cover, securing bolt, flow diffusing baffle. PDI approved.

    • ASIN: B01MR53C5D
    • Brand: L and J
    • ASIN: B01MR53C5D

  • Yescom 8lbs 5GPM Gallon Per Minute Stainless Steel Grease Trap Interceptor

    Specifications:- 8 lb Grease Trap, 5 Gallons Per Minute(G.P.M.)- Weight: 12 lbs(5.45 kgs)- Material: Heavy Duty 1.2mm Thickness Stainless Steel- Overall dimensions: 13" L x 9-1/3" W x 9-1/3" H- Connection size: 2"- Cover locking devicePackage Contents:- 1x Grease trap- 1x Waste filter basket

    • ASIN: B015Z28H6Q
    • Brand: Yescom
    • ASIN: B015Z28H6Q
    • UPC: 640265274213
    • Part No: 26GTP001-5GAL-SS

  • WentWorth 100 Pound Grease Trap Intercepto r 50 GPM Gallons Per Minute WP-GT-50

    Solve all your grease trap needs with the Wentworth Grease Trap Interceptor. This floor mounted unit comes with a gasket sealed cover and is secured with a standard hex head center bolt. It also includes an external trap seal, threaded inlet, threaded outlet and integral flow control.

    • ASIN: B0084784RM
    • Color: Steel
    • Brand: Wentworth
    • ASIN: B0084784RM
    • UPC: 091037247469
    • Part No: WP-GT-50

  • BEAMNOVA Commercial Grease Trap 8lbs 5GPM Gallons Per Minute Stainless Steel Interceptor for Restaurant Kitchen

    How it works: 1,Grease traps work on the basic principal that FOG's (Fats, Oils & Grease) float on water and solid particles sink. 2,As the inflow of waste water from the sinks enters the grease trap the fats, oils and greases rise to the surface and is trapped between the baffle plates. 3,The baffles on the outlet prevents FOG's from flowing directly through the unit. 4,These FOG's are retained within the unit along with food particles and clean water flows under the baffle plates through the unit to drain. 5,The retained waste collected within the unit can be easily removed at regular intervals using the removable fine mesh filter. Installation: Our Grease Traps are delivered fully assembled and couldn't be easier to install. Just connect the pipe run from the sinks and dishwasher to the Grease Trap inlet.Then pipe the Grease Trap outlet directly to drain. We recommend solvent weld pipe is used for a secure fit. Also make sure the trap is on the flat floor. Specifications: 8 lb Grease Trap- 5 Gallons Per Minute (G.P.M.) Weight: 12 lbs. Material: Heavy Duty 1.2mm Thickness 201 Stainless Steel Removable Baffles for Ease of Maintenance Cover locking device Overall dimensions: 13" L x 9 1/3" W x 9 1/3" H Connection size: 2" Warranty: 2 years Package Contents: 1...

    • ASIN: B01I4WJZME
    • Color: style 2
    • Brand: BEAMNOVA
    • ASIN: B01I4WJZME
    • UPC: 608473315852
    • Part No: 70019702

  • XuanYue Commercial Grease Trap 25 LB 13GPM Gallon Per Minute Stainless Steel Grease Interceptor Kitchen Kit for Restaurant Factory and Home

    Features: 1. Both ends accept No-hub adapters for steel or plastic. 2. The buckle lock on the removable lid can hook up to the trap tightly, effectively prevent odor spilling. 3. With the filter basket, the retained waste collected within the trap can be easily removed at regular intervals. 4. Smooth stainless steel grease trap edges inside and outside, do not worry about slitting your fingers when cleaning this trap. 5. This trap can prevent clogging of sewers, avoid the breeding of rodents caused by rotting grease, odor spills and extend the service life of sewers. Specifications: Weight: 7.12 kg / 15.7 lbs Material: Stainless steel Flow: 13 Gallon per minute Connection size: 1.77 inch inlet and outlet Length of the threaded pipe: 78 cm / 30.4 inches Dimensions: 67x33x30 cm / 26x12.9x11.7 inches Package Included: 1 x Grease trap 1 x Filter basket 1 x Threaded pipe Installation: Just connect the pipe run from the sinks and dishwasher to the Grease Trap inlet. Then pipe the Grease Trap outlet directly to drain. We recommend solvent weld pipe is used for a secure fit. Also make sure the trap is on the flat floor. Maintenance: 1. One week after installation, check the grease level inside the interceptor. These results should be used to determine the appropriate cleaning schedule to...

    • ASIN: B07CC9KWYW
    • Brand: XuanYue
    • ASIN: B07CC9KWYW
    • UPC: 718174172187

  • Zurn GT2700-25-3NH - Grease Trap Interceptor, 3 In, 25 GPM

    For use in in kitchen and restaurant areas where food is prepared, this ZURN grease trap interceptor is recommended for removing and retaining grease from wastewater. Model is corrosion-resistant coated fabricated steel construction with a flow diffusing baffle, integral trap, vented inlet flow control device, and no-hub connections to ease installation. Grease Trap Interceptor, 3 In, 25 GPM

    • ASIN: B00C70QIWA
    • Color: Gray
    • Brand: Zurn
    • ASIN: B00C70QIWA
    • UPC: 094706470205
    • Part No: GT2700-25-3NH

  • Bonide 60267 20 Lb Quick Grow Grass Seed

    • ASIN:
    • Model: 60267
    • Color: Multicolor
    • Size: 20 lbs20