Showing 1-10 of 167 results

Browse for 3d Accelerator best prices at RankeDeal.com

  • AuraGlow Teeth Whitening Accelerator Light, 5x More Powerful Blue LED Light, Whiten Teeth Faster

    Experience the power of light-activated teeth whitening in the comfort of your own home and get a whiter smile like never before. Teeth whitening lights are proven to help whiten faster and have been used for decades in dental practices across the country. Finally, you can use the same LED light-activated technology without paying a fortune at the dentist! How to Whiten With A Teeth Whitening Light This teeth whitening light works best when whitening gel or strips are applied to the teeth first, then shined on (both are sold separate). The light can be tucked just behind the lips so it rests comfortably and shines on the front of your teeth. The light can be used for short whitening sessions of just 10 minutes or up to 45+ minutes, depending on the instructions provided by the teeth whitening gel or strips you use. Directions For your first use, open the back of the LED light and remove the plastic tab below the batteries. The device will not work if this plastic tab is not removed. Make sure both batteries are face down with the flat side of the batteries facing toward you. Apply whitening gel or strips to your teeth, then put the light into your mouth with your lips over the plastic edges and press the power button. The light will shut off and beep in 10 minute interval...

    • ASIN: B015TJ56EG
    • Brand: AuraGlow
    • ASIN: B015TJ56EG
    • UPC: 709619629977
    • Part No: AGLIGHT17

  • Car Racing Simulator 2015 3D

    • ASIN: B00QM7QD6A
    • Brand: AxesInMotion
    • ASIN: B00QM7QD6A
    • Part No: com.aim.carsim

  • 3D MAXpider Complete Set Custom Fit All-Weather Floor Mat for Select Tesla Model S Models - Kagu Rubber (Black)

    Unlike the traditional floor liners with heavy weights, commercial rubbery looking; 3D MAXpider custom-fit floor mats are the revolutionary interior protection for your vehicles with an innovative, unique three-layer structure. The digitized three dimensional design measured to exact cabin contours of your vehicle for trapping mess and spills. The patented anti-skid bottom layer keeps mats in place without harming the original carpet like Velcro or without leaving marks like nibs of traditional rubber floor mats. Choices of two different surface layers with Thermoplastic Rubber of carbon fiber texture or Polyester looped fabric surface to complement different vehicles as the unique style you desired. The innovative XPE inner layer minimizes foot fatigue and provides the sound barrier for a quieter ride. Yet as we are all caring about our planet that out floor mats are made of environmental friendly material, which is non-toxic and odorless. 3D MAXpider custom-fit floor mats give the style you desired and the peace of mind for your factory carpets when spills happen. The cleanup is amazingly easy and fast; simply hoses them and spot clean. Get 3D MAXpider custom-fit floor mats for your vehicle’s carpeted floor areas. You can choose between front row, rear row, cargo, and trunk. ...

    • ASIN: B01DTBGCOY
    • Color: Black
    • Brand: 3D MAXpider
    • ASIN: B01DTBGCOY
    • UPC: 842132101527
    • Part No: L1TL00001509

  • Bob Smith Industries BSI-151H Insta-Set Super Glue Accelerator, 2 fl. oz.

    INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam. Directions in 5 different languages.

    • ASIN: B0166FFCCS
    • Color: Clear
    • Brand: Bob Smith Industries
    • ASIN: B0166FFCCS
    • UPC: 707336151085
    • Part No: BSI-151H

  • Samsung SSG-4100GB 3D Active Glasses 2012 Models - Black

    Samsung SSG-4100GB 3D Active Glasses (2012 Models) - Black.Compatibility: The Samsung 3D Active Glasses (SSG-4100GB) are compatible with 2011-up Samsung LED-LCD & Plasma 3D-ready TVs (D, E, and ES series). You must also have a 3D-ready Blu-ray player with 3D content, or a satellite/cable provider broadcasting in 3D. Note: Not compatible with previous Samsung TV's which featured a 3D Sync IR output, or 2010 Samsung 3D-ready TVs with IR emitter.

    • ASIN: B007K9P7H0
    • Color: Black
    • Brand: Samsung
    • ASIN: B007K9P7H0
    • UPC: 887466894073
    • Part No: SSG-4100GB

  • Satellite City QA-6 NCF Quick Aerosol Accelerator 6 oz

    Our NCF Quick accelerator is the best you will find anywhere. All of our accelerators dramatically decrease the curing time of the glue and force the glue to cure when it wouldn't otherwise, but NCF Quick is less expensive per ounce, has a more pleasant odor than the others, and comes in a convenient 6oz aerosol can for easy application. This accelerator is active for several minutes, so you can spray several pieces at once if you are making multiple bonds. Apply with a quick push of the button- the accelerator is meant to flash off instantly, so if you are getting the part wet, you are applying too much. NCF Quick is plastic-safe and foam-friendly. Over-application of NCF Quick may cause some light colored granite varieties to discolor. We recommend using NCF Stone instead for light-colored granite.

    • ASIN: B01EVEQ6XK
    • Brand: Satellite City
    • ASIN: B01EVEQ6XK
    • UPC: 603803614193
    • Part No: 43234-1262

  • visiontek 2D/3D accelerator driver install cd -V6.4-

    scratched but fine, clear case, no art work comes with it, P/N 400087, CLEARCASE, fast shipping.

    • ASIN: B01HKE9784
    • ASIN: B01HKE9784

  • Starbond Instant Set Accelerator (Activator) for CA Super Glue, Refill Bottle Plus Empty Pump Sprayer Bottle (16 Ounce)

    Starbond Accelerator Super Glue Accelerator, also known as CA glue "activator," is used to significantly speed up the drying time of cyanoacrylate super glues. The CA glue accelerant is a solvent based product that can be applied before and/or after CA glue application. Super Glue Accelerator is commonly paired with thicker viscosity CA glues and black CA glue, as these adhesives take longer to dry. In addition, it is useful when priming uneven surfaces or material combinations that are harder to bond, and in colder, drier environments where curing time may be delayed. Comes in pump sprayer and aerosol form. Used to cure the CA that flows from joints that are being pressed together, greatly enhancing the joints strength When using higher volumes of CA during gap filling applications, bonding time may take much longer, so Accelerator is highly recommended. ⚠️This product can expose you to chemicals including N,N-Dimethyl-p-toluidine, which is known to the State of California to cause cancer. For more information go towww.P65Warnings.ca.gov, or feel welcome to message us at [email protected] if you'd like a more detailed response.

    • ASIN: B00BUVAYQS
    • Brand: STARBOND
    • ASIN: B00BUVAYQS
    • UPC: 000126707166
    • Part No: A16

  • SeeedStudio BeagleBone Green- Ethernet-USB host-3D Graphics Accelerator

    SeeedStudio BeagleBone Green (BBG) is a joint effort by BeagleBoard.org and Seeed Studio. It is based on the open-source hardware design of BeagleBone Black and developed into this differentiated version. The BBG has included two Grove connectors, making it easier to connect to the large family of Grove sensors. It has also updated the 5V barrel to micro USB host. Specification: Processor: AM3358 1GHz ARM Cortex-A8 512MB DDR3 RAM 4GB 8-bit eMMC on-board flash storage 3D graphics accelerator NEON floating-point accelerator 2x PRU 32-bit microcontrollers USB client for power & communications USB host Ethernet 2x46 pin headers 2xGrove connectors Part list: SeeedStudio BeagleBone Green x 1 USB Cable x 1 User Guide x 1 SUPPORT FROM GROVE FAMILY Grove - 3-Axis Digital Gyro (I2C) Grove - 3-Axis Digital Compass (I2C) Grove - IMU 10DOF (I2C) Grove - Digital Light (I2C) Grove - Temperature & Humidity (I2C) Grove - Barometer (I2C) Grove - Finger-clip Heart Rate (I2C) Grove - GPS UART Grove - IR Distance Interrupter (I/O) Grove - Light Sensor Grove - Rotary Angle Sensor Grove - Sound Sensor Grove - Relay For more detail info, pls refer to Wiki: http://wiki.seeedstudio.com/wiki/Beaglebone_green

    • ASIN: B01AIC5AP4
    • Brand: seeed studio
    • ASIN: B01AIC5AP4
    • UPC: 841454100409
    • Part No: SED-102010027

  • Advances In 3D Integrated Circuits And Systems (Emerging Technologies in Circuits and Systems)

    3D integration is an emerging technology for the design of many-core microprocessors and memory integration. This book, Advances in 3D Integrated Circuits and Systems, is written to help readers understand 3D integrated circuits in three stages: device basics, system level management, and real designs. Contents presented in this book include fabrication techniques for 3D Tsv and 2.5D Tsi; device modeling; physical designs; thermal, power and I/O management; and 3D designs of sensors, I/Os, multi-core processors, and memory. Advanced undergraduates, graduate students, researchers and engineers may find this text useful for understanding the many challenges faced in the development and building of 3D integrated circuits and systems.

    • ASIN: 9814699012
    • ASIN: 9814699012