Showing 1-10 of 254 results

Browse for 3g Standard Housing best prices at RankeDeal.com

  • Pentek PENTEK-150072#10 Standard Blue/Clear Filter Housing, 3/4"

    The 150072 Pentek 3/4-inch #10 standard blue/clear without pr mounting bracket cap is made of clear styrene-acrylonitrile (San), allowing you to visually ensure your filter is operating at its optimal flow and capacity. This housing does not have a pressure relief button on the cap. The Pentek 150072 may be used in a variety of low-flow applications, such as under sink, counter top and pre- and post-reverse osmosis filtration systems. This housing may also be used in some humidifying systems, recreational vehicle filtration systems and food service applications. Order by 4PM CST for same day shipping.

    • ASIN: B013GV4ATQ
    • Color: Clear / Blue
    • Brand: Pentek
    • ASIN: B013GV4ATQ
    • UPC: 051678500729
    • Part No: 150072

  • Pentek 3G-STANDARD-CLEAR-34-PR10 Whole House Water Filtration System Housing

    Pentek took 35 years of experience with time-tested industry standard housings and made it even better with the 3G series. The PENTEK-3G-STANDARD-CLEAR-34-PR10 is manufactured from durable polypropylene and has excellent chemical resistance. The 3G-STANDARD-CLEAR-34-PR10 housing is compatible with a wide variety of filter cartridges and is ideal for residential, commercial and industrial applications. When setting up this housing on the water line, use teflon tape to ensure a tight leak free seal. When closing the housing after inserting a filter cartridge, be sure to apply food grade silicon lubricant to both the threads and the o-ring to ensure a good seal, and to make changing the cartridge easier. Be sure not to pinch the o-ring while closing this housing, as a pinched o-ring can leak

    • ASIN: B004H36LIQ
    • Color: Clear
    • Brand: Pentek
    • ASIN: B004H36LIQ
    • UPC: 051678505588
    • Part No: 150558

  • Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief

    This Pentek 150071 3/4" #10 Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4" female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.Specifications Filter cartridge size (H x W) (sold sep...

    • ASIN: B003VT7ERY
    • Color: Clear
    • Brand: Pentek
    • ASIN: B003VT7ERY
    • UPC: 799932596186
    • Part No: 150071

  • (10 pack) Pentek 151120, OR-34 Buna-N O-ring for Standard & 3G Standard Housings

    Quality Replacement Parts by TORK Distributors, all orders come with tracking

    • ASIN: B017J5ERFW
    • Brand: Tork
    • ASIN: B017J5ERFW
    • Part No: 151120, OR-34

  • Philips 12836REDB2 Intense Red Vision LED Stop/Tail light, 2 Pack

    A breakthrough innovation for your vehicle lighting: replace your light with our robust Philips Vision LEDs that deliver dynamic lighting for your vehicle, both inside and out. And thanks to our 12+ years lifetime, you will likely never have to replace them again. The innovative design and unmatched performance of Philips Vision LEDs are available for brake and taillights, back-up lights, dome lights, glove box lights, and license plate lights. All backed by our 12-year limited warranty.

    • ASIN: B00P2D415K
    • Color: Red
    • Brand: PHILIPS
    • ASIN: B00P2D415K
    • UPC: 046677717988
    • Part No: 12836REDB2

  • Pentek 153194 3G #10 Housing Standard Clear Sump

    153194 Pentek Filter Housing Sump - Clear for use on Pentek whole house filters housings.

    • ASIN: B00MPQK3U4
    • Brand: Pentek
    • ASIN: B00MPQK3U4
    • UPC: 799932589744
    • Part No: 153194

  • HAKATOP 5-Pack 151120 OR-34 O-Ring Replacement for Pentek/Pentair Water Filter 3G Standard Housings

    The Pentek 151120 is compatible with the following filters housings: Pentek #10, #12, and #20 housings with 3/4" inlet/outlet connections Ace Hardware 45025, 46764, 49560, 46766American Plumber W34-PR, WC34-PR, WV34, WVC34 Ametek: 151120-0, OR-34, PS-00, PSCL-Sl, PVHCL-SICulligan: HF-150, HF-160, HF-360, 01019184, OR-34DuPont WFPF38001C Omnifilter WH1, WH5, WH12, OB1 (Series A), U25 (Series E)The 151120 o-ring is a direct replacement for the following other part numbers: Ace Hardware 46766 American Plumber 152030, W34-OR Ametek Kleen-Plus 151120-03, OR-34 Culligan 01019184, 151120-27 DuPont WFAO150 Everpure EV311240 Hydrotech 151120, 34002028 Omini 19125 Omnifilter 151120 Pentek 151120, OR-34 Pura 151120 Sears 900375, STD302241 US Filter OR-34 Waterway 805-0241The o-ring is made of nitrile butadiene rubber (Buna-N) which offers superior flexibility and resistance to tearing during installation and use. This o-ring fits Pentek Standard and 3G standard filter housings, which are used in various applications and labeled under many brand names (see above).

    • ASIN: B07MC4NS7N
    • Brand: HAKATOP
    • ASIN: B07MC4NS7N
    • UPC: 791262413430

  • Pentek 150566 10" 3G Standard Filter Housing 3/4 Clear Sump IB w/ PR

    PENTEK-150566

    • ASIN: B005VPPP6S
    • Color: Blue
    • Brand: Pentek
    • ASIN: B005VPPP6S
    • UPC: 051678505663
    • Part No: 150566

  • Marsauto 194 LED Light Bulb 6000K 168 T10 2825 5SMD LED Replacement Bulbs for Car Dome Map Door Courtesy License Plate Lights (Pack of 10)

    ✪ATTENTION: the amazon filter of 194 168 t10 2825 led bulbs not mean that they would definitely fit all positions for your car.It depends on your car.If you have no idea about bulb size, pls contact us.✪Descrption:100% Brand New .Super bright will fit to the license Plate Light.Much Brighter than regular LEDs with high power chips, ideal replacement for dull and yellowish stock bulbs Faster on/off response time and vibration resistant High performance LED, long lifespan, superior illumination stability No modification needed. Just plug and play. Easy direct replacement for all stock 194 bulbs T10 bulb will replace part Number: T10 W5W W3W 168 194 2825  Application:Built-in Circuit for 12VDC Power Input.Easier installation: Just plug and play,only takes you 3-5 minutes for installation. All bulbs will be tested before shipping, never receive defective bulbs ever again. Package includes: 10 x White T10 194 LED Bulbs.Important Notice!1.   Please check and confirm whether this bulb fits your car before purchasing2.   If the LED does not light up, simply flip it 180 degrees (reverse the polarity)3.   If you have any other problem ,please feel free to contact us ,we are very happy to offer good service.

    • ASIN: B079L3WBDN
    • Color: White
    • Brand: Marsauto
    • ASIN: B079L3WBDN
    • UPC: 665268683114
    • Part No: AT10-10P-W

  • Pentek 150560 3/4" #20 3G Standard Clear Housing with Pressure Relief

    This Pentek 150560 3/4" #20 3G Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4" female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 20" x 2-1/2" sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.Specifications Filter cartridge size (H x W) (sold separately) 20 x 2-1/2 inches (254 x 63.5 mm) Initial pressure drop at 10 gpm 1 psi Maximum temperature 125 degrees F (51.7 ...

    • ASIN: B0061BS6RG
    • Color: Blue
    • Brand: Pentek
    • ASIN: B0061BS6RG
    • UPC: 051678505601
    • Part No: 150560

  • #20 3G MB Standard Clear Whole House Filter Housing

    • ASIN:
    • Model: 3G-STANDARD-20-CLEAR-PR20
    • Color: WhiteClear

  • 10 in. Whole House 3G Standard Filter Housing

    • ASIN:
    • Model: BA988575
    • Color: Multicolor