Showing 1-10 of 411 results

Browse for Bass Boat Jack Plate best prices at RankeDeal.com

  • 5.5-Inch Set Back CMC Manual Power-Lift Transom Jack Plate 65012

    With the CMC, you can adjust the power lift from the top or bottom! With a convenient one piece design made of 6061 T6 extruded aluminum alloy and stainless steel fasteners for maximum strength and durability. It has centrally located adjustment screw for positive alignment, 5 inch vertical adjustment, and is designed to fit standard B.I.A. bolt pattern without drill holes or making modifications in the boat or motor.

    • ASIN: B003FKLEES
    • Brand: Hi-Tech Fishing
    • ASIN: B003FKLEES
    • UPC: 739697650129
    • Part No: ML-65

  • Pro Series 1000 Lbs. Capacity Swivel Trailer Tongue Jack - EJ10000101

    Pro Series EJ1000 Trailer Jack is designed for use with marine and utility trailers. Pro Series brand tongue jacks are time-tested and application-proven. Features clear zinc finish for corrosion protection. Bolt-on, includes all necessary mounting hardware and 3/8" pull pin. Sturdy 6" Poly wheel. The Pro Series brand retaining ring swivel mount offers minimal deflection and maximum support. Mount fits up to a 3" x 5" trailer frame. Capacity: 1000 lbs., Travel: 10", Retracted Length: 13", Extended Length: 23" (Measured Center of Mount to Bottom of Wheel) Top Clearance: 11" (Measured Center of Mount to Top of Jack)

    • ASIN: B003IHMHLW
    • Color: Beige
    • Brand: Pro Series
    • ASIN: B003IHMHLW
    • UPC: 191439014437
    • Part No: EJ10000101

  • Happybuy Trailer Mover 350W 12V Electric Trailer Jack Max Vehicle Load 5000Lbs Trailer Jockey Wheel Utility Trailer Jack Easy to Maneuver Trailer Caravan Boat (12V/350W)

    350W Motorised Jockey Wheels 12V Electric Power Mover Caravan Trailer Boat This powerful trailer mover is designed to assist you in moving your caravan, boat trailer, or horse trailer. This compact and portable trailer mover is highly manoeuvrable, and thus suitable for use in confined spaces like yards, carports, driveways, caravan parks, etc. Thanks to its robust construction and powerful 350 W motor, this trailer mover has a weight capacity of up to 2270 kg, which allows you to steer the trailer effortlessly. Technical Parameters Model: Striker Max Incline: 5 Degrees Max Vehicle Load: 5000lbs(2270kg) Max Jockey Wheel Load: 600lbs(272kg) Adjusted Clamper Height: 32cm/42cm Motor: 12V/350W Tyre Diameter: 19cm Gear Ratio: 326:1 Max Speed: 6-7 meters per minute Brake: Automatic brakeMinimum Operating Battery Power:12V/24Ahv lead-acid battery or jump start(battery not included) Features: Motor & Gear system: DC motor provides power to the gear mechanism, and reduction gears converts motor power into moving force. Control box: Include the electric components, and protect motor from over heat damage. Clamp: It is same as normal jockey wheel clamp for fix Trail Jack to vehicle Chassis. Lift Handle: Adjust the height of Trailer Jack. Locking & Cover: The locking pin and cover prevent y...

    • ASIN: B06XYKHNYM
    • Color: 12V/350W
    • Brand: Happybuy
    • ASIN: B06XYKHNYM
    • UPC: 601285889986
    • Part No: Happybuy Trailer Mover

  • Bob's Machine Shop Action Series Jack Plate 6 inch setback

    Might take upto 2 weeks before shipping Bob's Machine Shop's new hydraulic jack plate line, "Action Series Jack Plate", offers new technology in the Jack Plate market. The first Bob's Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat. This is a great OEM feature to help save time in rigging.

    • ASIN: B009HU17FG
    • Brand: Bob's Machine Shop
    • ASIN: B009HU17FG
    • UPC: 894721000674
    • Part No: 100-106010

  • SeaStar Solutions JP4120 Hydraulic Jackplate, 12 inch Setback

    The SeaStar Jackplate is one of the sleekest and most durable engine Jackplates available. This essential performance accessory allows for higher speed, gains in fuel economy and the ability to run in shallow water. The all new SeaStar Jackplate features sleek, bold styling that is redefining the look for Jackplates.

    • ASIN: B00QJ718B8
    • Color: One Color
    • Brand: SeaStar
    • ASIN: B00QJ718B8
    • UPC: 808282316433
    • Part No: JP4120

  • Reese Towpower 74329 Trailer Winch

    Reese Towpower Winch is designed to provide excellent load lifting facility. It features unique self-activating automatic brakes that ensure better control. This winch unreels easily and includes permanent lubricated bearings on drive shafts.

    • ASIN: B0016KABFC
    • Color: Silver
    • Brand: Reese Towpower
    • ASIN: B0016KABFC
    • UPC: 043957197102
    • Part No: 74329

  • SE Sport 200 Hydrofoil, fits 8 hp - 40 hp engines

    Same great performance as the 300 for smaller motors, 8-40hp. Designed with slightly longer end of anti-ventilation plate coverage, the SE Sport 200 turns throttle down into an instant hole shot. Our smaller 200 model is recommended for outboards from 8-40 HP. Manufacturers lifetime warranty.

    • ASIN: B00144CZOA
    • Color: Black
    • Brand: Sport Marine Technologies
    • ASIN: B00144CZOA
    • UPC: 787199724244
    • Part No: 72424

  • Dometic SeaStar Pro Hydraulic Steering Kit, HK7514A-3, with 14ft. Hose

    One of the top selling recreational marine Hydraulic Steering Systems for Outboard powered boats from the leader in marine steering technology, SeaStar Solutions (formerly Teleflex Marine). The HK7514A-3 Steering System includes HC6345-3 Pivot Mount PRO Cylinder with Positionable Stainless Steel O-Ring (ORB) Fittings for easy Hydraulic Hose Routing along with keyed support brackets to prevent racking of the cylinder, HH5770-3 PRO Helm with updated ORB Fittings and Anodized Protection to saltwater, two 14’ SeaStar PRO Kevlar Reinforced Hoses which provide very low thermal expansion properties and are kink and abrasion resistant, two Quarts of SeaStar HA5430 proprietary Hydraulic Steering Fluid for maximum performance and protection along with Installation Instructions. Components in the HK7514A-3 meet ABYC and NMMA certification standards and are designed and manufactured in North America. This Steering Kit is ideal for high-performance boats with single non-power-assisted outboards up to 300 HP, especially those capable of speeds over 60 MPH, which demand maximum steering control and comfort. It is suitable for use with high-performance propellers and jack plates. Upgrade Options to Consider: • Stainless Steel Bulkhead Hose Fittings • Tilt Steering • SeaS...

    • ASIN: B011QPXL1W
    • Brand: SeaStar
    • ASIN: B011QPXL1W
    • UPC: 731957922373
    • Part No: HK7514A3

  • Bob's Machine Shop Action Series Jack Plate 8 inch setback

    Might take upto 2 weeks before shipping Bob's Machine Shop's new hydraulic jack plate line, "Action Series Jack PlateTM", offers new technology in the Jack Plate market. The first Bob's Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat. This is a great OEM feature to help save time in rigging.

    • ASIN: B009HU94CY
    • Brand: Bob's Machine Shop
    • ASIN: B009HU94CY
    • UPC: 894721000728
    • Part No: 100-108001

  • Boat Cover for Nitro Bass Tracker Z-7 SC W/TM W/Jack Plate 2010-2014 Heavy-Duty

    Our Cutting Edge Boat Cover will provide continuous year round protection for your boat both indoor and outdoor. - Built to Last: Our covers are newly designed to outlast any other cover. - Multi-function Design: Our covers are designed for all purposes including trailering, storage, and mooring of your boat. - Reliable Features: Includes a heavy-duty, integrated trailering system with straps and an elastic hem to keep the cover on tight. - All Around Protection: Our covers will efficiently and effectively shield your boat from all finish destroying agents. - Durability: Our covers are made from technologically advanced Urethane coated 600 Denier Marine Grade Polyester and can handle the worst weather conditions. - This cover is a flex-fit cover used to accommodate multiple boat models. - Smart Choice: Investing in our boat cover is not only a practical option, it is the best option for protecting your boat. - 5 Year Warranty: Covering the material and workmanship. - *PLEASE NOTE if you have a wakeboard tower, bow rails over 6 inches in height, or if you want to cover an extended swim platform PLEASE CONTACT US PRIOR TO PURCHASE to ensure the proper fit. - O/B Motor Hoods are available in our store and are sold separately. - Use of a support pole is highly recommended to prolong ...

    • ASIN: B01DC90T60
    • Color: grey
    • Brand: SBU
    • ASIN: B01DC90T60
    • UPC: 718315520174
    • Part No: SBUBC6122

  • Harbor Master 600-Denier Polyester Boat Cover, Gray

    • ASIN:
    • Model: BC3111AA
    • Color: Gray
    • Size: 12'Fits 12'-14', 68" Beam

  • Harbor Master 150-Denier Polyester Boat Cover, Silver

    • ASIN:
    • Model: BC1311HMA3
    • Color: Silver
    • Size: 14'Fits 14'-16', 90" Beam