Showing 1-10 of 607 results

Browse for Braided Hose Assembly best prices at RankeDeal.com

  • ZKer 6FT 1/4" (6mm) Nylon Braided Fuel Line with Primer Bulb Universal Marine Outboard Boat Fuel Hose Line Assembly Steel Hose Clamps Primer Bulb for Motor RVs

    ZKer Nylon Braided RVs Motor Tractors Marine Boat Outboard Universal Fuel Line Assembly with Primer BulbFeatures:It includes a premium quality rubber bulb, 1/4" fuel hose, stainless steel hose clampsThe rubber bulb is made from new materials that let you use it in a wide temperature range.High pressure, good softnessUpgrade older tanks to the latest low-permeation fuel line standards with this fuel line assemblyIt's suitable for Boats, RVs, Tractors, and CaravansSpecification:Material: PVC and Nylon threadSize: 190cm / 6ftColor: BlackPackage include:1 x Fuel Line Assembly

    • ASIN: B07CQN83NH
    • Brand: ZKer
    • ASIN: B07CQN83NH
    • UPC: 634759423119
    • Part No: ZK-H6mm

  • Unisource 4TSC Gray PTFE Braided Hose Assembly, 1/4" Brass NPT Male Connection, 3000 PSI Maximum Pressure, 36" Length, 1/4" ID

    This Unisource 4TSC series spray hose has a smooth bore PTFE inner core to reduce friction. It has an American Iron and Steel Institute (AISI) 300 stainless steel wire braid to resist expansion for maintaining maximum pressure. It has a brass NPT male fitting on one end for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The maximum pressure rating is 3000 pounds per square inch (psi), and the operating temperature ranges from -65 to +450 degrees F. This steam hose is suitable for use in applications such as automotive, high-pressure gas, food processing, pharmaceutical, chemical transfer, and process water.Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method to help determine the type of hose needed:S = Size (ID, OD, and length)T = Temperature (maximum and minimum temperatures of material being transported)A = Application (industry or process)M = Material (to be conveyed, type and concentration)P = Pressure (maximum working pressure)E = Ends (type of end connectors or couplings on hose)D = Delivery method (volume and velocity)The inside diameter of the hose must be adequate to keep pressure loss to a minimum and avoid damage to the hose due to heat generation or excessive t...

    • ASIN: B0063LVTCI
    • Color: Gray
    • Brand: Unisource
    • ASIN: B0063LVTCI
    • Part No: 4TSC-11-11-36.0

  • Hromee Extended Tank Drain Valve Assembly Kit with 10 Inch Flexible Braided Steel Tube 1/4 Inch NPT Shut-Off Ball Valve 90 Degree Brass Elbow Pipe Fitting and Thread Seal Tape for Air Compressor

    There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8" male NPT threaded on one end and a 1/4" female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

    • ASIN: B07MB8YL8Z
    • Brand: Hromee
    • ASIN: B07MB8YL8Z
    • Part No: HR4013

  • Koul Tool AN Hose End Socket Capsule Kit, Hot Rod Kit (-6 AN, -8 AN, -10 AN)

    KOUL Tools has delivered a solution that makes AN hose assembly a snap. This handy composite device makes installing the socket over the cut end of the stainless hose a breeze. Simply open the clamshell, insert the socket, clamp the KOUL Tool in a vise, or secure with Vise-Grip pliers. Push the hose through the opening with a twisting motion and the hard part of hose assembly is done. Fits all brands of AN fittings! This tool can pay for itself the first time you don't have to scrap some hose because it got too short trying to clean up the end, and you'll be amazed at the amount of time you'll save.Note: Not for use with PTFE Lined Hoses

    • ASIN: B00TIUTFM2
    • Brand: KOUL Tools
    • ASIN: B00TIUTFM2
    • UPC: 689076481403
    • Part No: 681

  • Unisource 4TSC Gray PTFE Braided Hose Assembly, 1/4" 303 Stainless Steel JIC Female Connection, 3000 PSI Maximum Pressure, 60" Length, 1/4" ID

    This Unisource 4TSC gray PTFE braided hose assembly has a 1/4" ID and is suitable for chemical or gas transfer operations. It is constructed with a nonconductive smooth-bore PTFE (polytetrafluorethylene) tube for resistance to chemicals and high temperatures, and a cover reinforced with a single braid of 300 series stainless steel for a maximum pressure rating of 3,000 pounds per square inch (psi). This hose exceeds Compressed Gas Association (CGA) Standard E.9 for flexible, PTFE-lined pigtail hoses for compressed gas service, and has a minimum burst pressure rating four times that of its maximum working pressure rating, also known as a 4:1 safety factor. It can withstand temperatures ranging from -65 to +450 degrees F, and comes equipped with two 1/4" factory-installed 303 stainless steel female Joint Industry Council (JIC) fittings. This hose assembly is suitable for a wide variety of commercial and industrial applications, including automotive, gas conveyance, food processing, pharmaceutical, chemical transfer, or other applications where the chemical and heat requirements exceed the protections offered by rubber, metal, or plastic hose.Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method: S = Size (ID, OD, ...

    • ASIN: B0063LUYII
    • Color: Gray
    • Brand: Unisource
    • ASIN: B0063LUYII
    • Part No: 4TSC-25-25-60.0

  • Royitay Universal Fuel Hose Nylon Braided boat gas line hose 5/16" 8mm Tractors Marine Outboard Boat Motor RVs Fuel Line Assembly with Primer Bulb Steel Hose Clamps 6FT(5/16" 8mm)

    Note : This is universal fuel line and as such do not come with engine or tank fittings. Description: It includes a premium quality rubber bulb and 5/16"fuel hose, 360┬░stainless steel hose clamps. Fully compatible with Ethanol blended fuels. Meets EPA low permeation mandates. Engineered low permeation material prevents fuel evaporation. Bulb engineered to maintain flexibility and prevent collapse in hot and cold temperatures. Fitment : Suitable for Boats, RVs, Tractors, and Caravans. Specification:Material:PVC and Nylon threadFuel Line dimention: 5/16"(8mm) Length: 6 ft(190cm) Color:Black Package include: 1 x Fuel Line Assembly

    • ASIN: B07G45M8ZH
    • Brand: Royitay
    • ASIN: B07G45M8ZH
    • UPC: 734779220788
    • Part No: rt039_1

  • Bayou Classic M5HPR, 0-5 PSI Adjustable Regulator with Stainless Braided Hose

    This Bayo Classic hose/regulator is a direct replacement to Bayou Classic turkey fryers and models 2212,SQ14, and 1114. I features high pressure output, and stainless braided construction.

    • ASIN: B000KE3OQS
    • Color: Stainless Steel
    • Brand: Bayou Classic
    • ASIN: B000KE3OQS
    • UPC: 050904031655
    • Part No: M5HPR

  • Aeroquip FBM3553 Hose Assembly Lube

    Hose Assembly Lube. Superior Specially Compounded Lubricant.

    • ASIN: B001GES7EK
    • Brand: Aeroquip
    • ASIN: B001GES7EK
    • Part No: FBM3553

  • Unisource 6TSC Gray PTFE Braided Hose Assembly, 3/8" 303 Stainless Steel JIC Female Connection, 2500 PSI Maximum Pressure, 24" Length, 3/8" ID

    This Unisource 6TSC gray PTFE braided hose assembly has a 3/8" ID and is suitable for chemical or gas transfer operations. It is constructed with a nonconductive smooth-bore PTFE (polytetrafluorethylene) tube for resistance to chemicals and high temperatures, and a cover reinforced with a single braid of 300 series stainless steel for a maximum pressure rating of 2,500 pounds per square inch (psi). This hose exceeds Compressed Gas Association (CGA) Standard E.9 for flexible, PTFE-lined pigtail hoses for compressed gas service, and has a minimum burst pressure rating four times that of its maximum working pressure rating, also known as a 4:1 safety factor. It can withstand temperatures ranging from -65 to +450 degrees F, and comes equipped with two 3/8" factory-installed 303 stainless steel female Joint Industry Council (JIC) fittings. This hose assembly is suitable for a wide variety of commercial and industrial applications, including automotive, gas conveyance, food processing, pharmaceutical, chemical transfer, or other applications where the chemical and heat requirements exceed the protections offered by rubber, metal, or plastic hose.Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method: S = Size (ID, OD, ...

    • ASIN: B0063LV28E
    • Color: Gray
    • Brand: Unisource
    • ASIN: B0063LV28E
    • Part No: 6TSC-25-25-24.0

  • Kohler 1075256-CP 29-Inch M15 Braided Spray Hose Assembly, Chrome

    You can count on genuine Kohler parts to maintain the same Kohler quality. Trust in these genuine Kohler parts.

    • ASIN: B00263VLYI
    • Color: Chrome
    • Brand: Kohler
    • ASIN: B00263VLYI
    • UPC: 650531664105
    • Part No: 1075256-CP

  • PointZero Braided Airbrush Air Hose 1/8

    • ASIN:
    • Model: 2004-10092
    • Color: White
    • Size: 10 ft. Length

  • Delta: Hose Assembly

    • ASIN:
    • Model: RP62865RB
    • Color: BronzeVenetian Bronze