Showing 1-10 of 955 results

Browse for Carbide Sharpening Stone best prices at RankeDeal.com

  • Corona AC8300 Sharpening Tool

    • ASIN: B000BPASBK
    • Color: -
    • Brand: Corona
    • ASIN: B000BPASBK
    • UPC: 648412329175
    • Part No: AC8300

  • HTS 131A0 6" Double Sided Diamond Sharpening Stone

    This two sided, industrial diamond coated sharpening stone from Hobby Tool Supply can be used dry or with soapy water. The diamonds are bonded to two steel alloy sheets. It is perfect for sharpening anything from knives to axes and even shovels!

    • ASIN: B00U1T2ZVM
    • Brand: HTS
    • ASIN: B00U1T2ZVM
    • UPC: 819682010869
    • Part No: 131A0

  • WHETSTONE KNIFE SHARPENER - 2 side grit 120/240 - MADE FROM SILICON CARBIDE, THE HARDEST MATERIAL AFTER DIAMOND, combination Sharpening stone perfect for both knives and tools

    A WHETSTONE KNIFE SHARPENER, THE PROFESSIONAL CHOICE FOR A KNIFE SHARPENER The combination stone comes in a handy solid plastic case. A two-sided Combination fine/coarse combination sharpening stone. How to use: Soak the whetstone in water for about 5 to 10 minutes or until only a little air bubbles appearing, that indicates the stone have absorbed the optimum amount of water necessary for best result. And keep applying water while sharpening. The reason for using the water is, the water makes the small stone particles released when honing, form an abrasive substance that gives the best sharpening result. Place the stone on a slip-resistant surface like a wet wiping piece or a wet dishcloth. If you're handy with woodwork you can make a wooden base, but a wet dishcloth will do just fine. Start with moving the blade, at an angle of 10 - 15°, back and forth (away from and towards the body) using the coarse side of the stone. Remember to apply water. Always start at the tip of the blade, only using light pressure, and pull the blade over the stone through the middle and down to the base of the blade. Repeat several times, until a fine edge will have developed, then turn the knife around to sharpen the other side of the blade. To finish the process turn the Stone around and repeat th...

    • ASIN: B01M7SXVFC
    • Color: Stone: light blue/gray Box: black
    • Brand: Danesoe Industry
    • ASIN: B01M7SXVFC
    • UPC: 747946950999

  • Browne (821) 8" x 2" Silicon Carbide Sharpening Stone

    A sharp knife makes for easier slicing and dicing and is actually safer than a dull one. Keep yours sharp with this stone.

    • ASIN: B000QA1990
    • Color: black
    • Brand: Browne Foodservice
    • ASIN: B000QA1990
    • UPC: 028238768462
    • Part No: 821

  • Whetstone Cutlery 20-10960 Knife Sharpening Stone-Dual Sided 400/1000 Grit Water Stone-Sharpener and Polishing Tool for Kitchen, Hunting and Pocket Knives or Blades by Whetstone

    The double sided 400 and 1000-grit Water Stone Sharpening Block by Whetstone enables you to safely and easily sharpen and polish your kitchen cutlery, hunting or pocket knives, blades and razors. You can even use it for your gardening tools! This stone only requires water, no oil needed! Made with durable green silicon carbide, this honing tool will last for years to come. TO USE: Soak stone in water for no more than 5-10 minutes. Place stone on a damp cloth with the courser 400 grit side (dark green) facing up. Hold the knife so that it’s flat and perpendicular to the block, with the blade facing left. Holding the knife at a 20-degree angle, slowly sweep the edge of the blade from left to right down the length of the stone and continue until sharp. If stone starts to feel too dry, add more water. Be patient and take your time. Flip knife over and repeat on the other side (now moving from right to left). Be sure to sharpen both sides evenly. To polish the blade further, flip stone over to the fine 1000 grit side (light green) and repeat the process. When blade is honed to desired sharpness, wash and dry your knife. To clean your stone, simply rinse with water, wipe away any remaining metal residue with a rag, rinse again, then dry. SATISFACTION GUARANTEED: Whetstone is commit...

    • ASIN: B0055B2RGO
    • Color: White
    • Brand: Whetstone Cutlery
    • ASIN: B0055B2RGO
    • UPC: 784427903990
    • Part No: 20-10960

  • BearMoo Whetstone Premium 2-IN-1 Sharpening Stone 3000/8000 Grit Waterstone Kit - Knife Sharpener Stone Safe Honing Holder Silicone Base Included, Polishing Tool for Kitchen, Hunting and Pocket Knives

    -- What could we do when our knives or tools are dull or even chipped? -- Don't worry, BearMoo sharpening stone can help you solve this problem. 3000 Grit Side: This fine grit is able to put an edge on a tool or knife that exceeds just about any commercial edge you'll find. This grit is very fine and sharpen very slowly. This is to be used after you've created an edge with more coarse grits. 8000 Grit Side: This grit is ideal for finishing and polishing the edge. A knife or tool that has been sharpened to this stage will work for any task required. Instructions to use: 1. Soak the sharpening stone into water for 5 minutes, then put it on a steady surface such as a table or a desk. 2. First use the #3000 grit side for fine grinding in 10~30 degree angle, push the knife out with a little force, and then gently retracted. This process takes about 15 minutes. 3. Then use the #8000 grit side to polish your knife, don't force too much. This process takes about 10 minutes. 4. After sharpening the knife, clean the knife with wet cloth or water, then dry it. 5. Use a soft brush to clean the sharpening stone, then placed in a ventilated place out to dry. Attention: 1. Do not only use the middle of the sharpening stone, please make full use of the surface of the whetstone. 2. Do not use...

    • ASIN: B01KT9US30
    • Color: 3000/8000 Whetstone Sharpening Stone
    • Brand: Chefic
    • ASIN: B01KT9US30
    • UPC: 613072870466
    • Part No: H20-10000-00105

  • Genuine 3 Stone Arkansas 8" Full Size Tri Hone Whetstone Knife Sharpening System with Silicon Carbide (Coarse), Soft (Medium) and Hard (Fine) Stones 8" X 1" X 1/4" TRI-8

    The full size Tri Hone is the solution to overcoming one of the major obstacles to knife sharpening-keeping the blade at the proper angle to the stone. The included 23 degree sharpening guide helps keep the knife blade at the perfect sharpening angle. This 3 stone model comes with Coarse (Silicon Carbide), Medium (Soft Arkansas) and Fine (Hard Arkansas) stones. The different stone grades are as follows: Silicon Carbide (Coarse): man-made stone that is much coarser than any of the natural Arkansas stones. This is the stone to use on very dull or damaged edges. Soft Arkansas (Medium): coarsest, most versatile and most popular of the Arkansas stones. Soft Arkansas stones are used to quickly put an initial edge on dull or neglected knives or other cutting tools. This is a natural stone and color can vary from white to gray/black to pink/gray, or a combination of these colors in a single stone. Hard Arkansas (Fine): used to establish and maintain a keen edge on cutting tools. This natural stone color can include Grey, White, Black/Grey, Grey/Pink, Black/ White, White or White/ Pink, or a combination of these colors. Genuine Arkansas stones are 100% quarried in the Ouachita Mountains of central Arkansas. They are highly sought after worldwide for their superior ability to sharpen knive...

    • ASIN: B01C9SPPDW
    • Brand: Dan's Whetstone Company Inc.
    • ASIN: B01C9SPPDW
    • UPC: 791617730076
    • Part No: TRI-8

  • Bora 6-Inch Green Silicon Sharpening Stone. 2 Sided Fine/Course for Sharpening

    Keep your chisels, knives, and other edge tools at their sharpest with the Bora 6-Inch Green Silicon Sharpening Stone. This double-sided green silicon sharpening stone makes it easy to ensure your woodworking tools perform their best. The coarse side helps you get rid of nicks and other imperfections; then you can hone your blade on the fine side. Its 6-inch length makes this sharpening stone ideal for bench work. If using oil as lubricant, apply oil to surface of stone and begin working. Apply oil on surface occasionally during use to flush away abraded material. If using water as lubricant, soak stone 15-30 mins prior to use. Continue to use water to lubricate stone.

    • ASIN: B003Y3BM84
    • Brand: Bora
    • ASIN: B003Y3BM84
    • UPC: 735090919313
    • Part No: 501098

  • Norton 69936687444 Flattening Stone With Diagonal Grooves For Waterstones, Coarse Grit Silicon Carbide Abrasive, Superbly Flat With Hard Bond, Plastic Case, 9" x 3" x 3/4"

    The Norton flattening stone for waterstones is precisely level, with a hard bond, to maintain the flat surface of waterstones; coarse-grit silicon carbide gives it maximum cutting power, and diagonal grooves on one face provide channels for material removal. This flattening stone measures 3/4 x 9 x 3 inches (H x W x D), which makes it suitable for flattening any waterstone with lesser dimensions. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) The plastic case protects and stores the stone. Flattening stones are abrasive rectangular blocks used to smooth the sharpening surfaces and flatten the depressions that repeated use wears in water-lubricated sharpening stones (waterstones), to prepare them for effective sharpening of knives or tools. Waterstones have a finer grit and softer bond than oilstones, and use water as the lubricant to develop a slurry, a thin paste of abrasive grains and water that removes metal with less pressure than oilstone requires. Because of these characteristics, waterstones wear concave with use, and should be flattened periodically for best performance. Norton Abrasives manufactures sanding, grinding, and polishing abrasive...

    • ASIN: B00067ZSJ0
    • Color: Grey
    • Brand: Norton Abrasives - St. Gobain
    • ASIN: B00067ZSJ0
    • UPC: 789164308541
    • Part No: 69936687444

  • Gritomatic Silicon Carbide 6" x 1" x 0.25" Sharpening Stone Set with Aluminum Mounting for Edge Pro (5 stones)

    Gritomatic Sharpening Stones are used for sharpening knives using Edge Pro sharpeners. The stones are made of silicon carbide and are designed for the hardest steels (up to 65 HRC). All stones are 6 mm thick and mounted on high-quality aluminum blanks with laser engraving. It is advisable to use Gritomatic stones for sharpening knives made of hard stainless steel or carbon steel. Using Gritomatic stones to sharpen knives made of soft steel is not recommended, as it will cause the stones to wear an at increased rate. However, coarse Gritomatic stones of 120 and 220 grit can be used as a universal stone due to their harder bonding.

    • ASIN: B075Y3WWYF
    • Brand: Gritomatic
    • ASIN: B075Y3WWYF
    • Part No: SET-5-SIC

  • Ultimate Survival Technologies Sharpening Stone

    • ASIN:
    • Model: 20-511-310
    • Color: GrayStone
    • Size: standardStandard

  • Corona AC8300 5" Carbide Sharpening Tool

    • ASIN:
    • Model: AC8300
    • Color: SilverMulticolor
    • Size: EA