Showing 1-10 of 279 results

Browse for Carbon Steel Pipe best prices at RankeDeal.com

  • Drill America 3"-8 NPT Pipe Tap, Carbon Steel, DWTPT Series

    Drill America DWTPT series Qualtech carbon steel pipe tap is designed to clean and/or re-thread damaged or jam pipe threads. It is appropriate for threading a wide variety of materials both ferrous and non-ferrous. The nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round with square end shank. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.

    • ASIN: B00FXKW78A
    • Brand: Drill America
    • ASIN: B00FXKW78A
    • UPC: 887861076364
    • Part No: DWTPT3INCH

  • Smith-Blair Stainless Steel Repair Clamp, Redi-Clamp, Carbon Steel Bolt, 2 Bolts, 6" Length, 4" Pipe Size

    ' Repair Clamp, Redi-Clamp, Material of Construction Stainless Steel, Gasket Material Nitrile, Pipe Size 4 In, Max. Pressure 150 PSI, Temp Range -20 F to 180F, No. of Bolts 2, Length 6 In, Bolt Size 7/16 In x 4 In, Bolt Material Carbon Steel, Standards NSF 61 '

    • ASIN: B008YO4W3K
    • Brand: Smith-Blair
    • ASIN: B008YO4W3K
    • Part No: 24500045006000

  • Hanson 7005 High Carbon Steel Hexagon Taper Pipe Die 1-7/16" Across Flat Die 1/2"-14 NPT

    1/2inch x 14 National Pipe Taper Thread, 1-7/16inch Across, Hexagon Die, Carbon Steel, Ideal For Plumbing, Air Applications & For Rethreading Where High Accuracy & Tolerance Thread Is Not Critical, Recommended For Use With Hexagon Die Stock, Die Can Be Used With A Wrench Or Socket When Space Is Limited, Designed For Hand Threading Work In A Variety Of Materials.

    • ASIN: B000QFKQO4
    • Brand: Irwin Tools
    • ASIN: B000QFKQO4
    • UPC: 042526070051
    • Part No: 7005

  • Drill America 3/4"-14 Carbon Steel Hex NPT Pipe Rethreading Die, DWT Series

    Drill America DWT Series Qualtech carbon steel hex die is for dressing over bruised or rusty threads, this is the most cost effective rethreading tool available. No special holder is required for this type of die, any wrench large enough will suffice. Ideal for maintenance in the shop or field.

    • ASIN: B00FXKKF0C
    • Brand: Drill America
    • ASIN: B00FXKKF0C
    • UPC: 887861104586
    • Part No: DWTHXNPT34

  • Forney 21145 Pipe Die Industrial Pro Hex Re-Threading Carbon Steel, Right Hand, 1/2-Inch-by-14 NPT

    The Forney 21145 Industrial Pro 1/2" x 14 CS NPT (taper pipe) right hand carbon steel (CS) hexagon re-threading die. Hex shape allows use in tight places. Used primarily for repairing existing threads. Forney Industries is one of America's longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm & ranch and do-it-yourself markets. If you've got metal working questions, we've got answers. Were committed to your success regardless of location size or needs. 1/2-inch(12.7mm)-by-14 pipe die. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

    • ASIN: B003XEY682
    • Brand: Forney
    • ASIN: B003XEY682
    • UPC: 032277211452
    • Part No: 21145

  • Stainless Steel 304/304L Pipe Fitting, Long Radius 45 Degree Elbow, Butt-Weld, Schedule 10, 2-1/2" Pipe Size

    The Merit Brass stainless steel 304/304L butt-weld schedule 10 pipe fitting is a long radius 45-degree elbow for changing flow direction. This fitting has butt-weld, beveled openings for welding pipes together. Made of stainless steel 304/304L, the low carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. The elbow meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. Family-owned since 1937, the company is based in Cleveland, OH. Merit Brass distributes pipe fittings to the United States and Canada.

    • ASIN: B003RWTXE2
    • Brand: Merit Brass
    • ASIN: B003RWTXE2
    • Part No: NC01402-40

  • Drill America 1/2" Carbon Steel NPT Pipe Tap and 23/32" High Speed Steel Drill Bit Set, POU Series

    1/2" Carbon Steel NPT Tap and 23/32" HSS Drill Bit Set, 1/2" NPTTap information: Drill America dwtpt Series Qualtech carbon steel pipe Tap is designed to clean and/or re-thread damaged or jam pipe threads. It is appropriate for Threading a wide variety of materials both ferrous and non-ferrous. The nominal size of a pipe Tap is that of the pipe fitting to be tapped, not the actual size of the Tap. The thread tapers 3/4 of an inch per foot. All pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. Npt threads require the use of a sealer like Teflon tape or pipe compound. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round with square end shank. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in Shallow cuts. Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction. Drill bit information: Drill America dwdn Series high speed drill bit is a dependable, general purpose drill designed to perform in a broad range of materials in the iron and steel families. Ideal for production, maintenance or portable drilling jobs. Surface treated with abrasion-resistant black oxide. Black oxide t...

    • ASIN: B01MG92FX1
    • Brand: Drill America
    • ASIN: B01MG92FX1
    • UPC: 887861241854
    • Part No: POU1/2NPTW/DRILL

  • Dixon LJ200 Carbon Steel Pipe and Welding Fitting, 150lbs ASA Forged Flange, 2" Lap Joint

    This Dixon LJ series flange is used for joining two pieces of pipe or connecting valves in a piping system. It has a slip-on lap joint with bolt holes for connecting to other bolted flanges or flat surfaces. It is made of forged carbon steel for tensile strength and hardness. This fitting has a maximum operating pressure of 150 pounds per square inch (psi) and meets American National Standards Institute (ANSI) Class 150 for quality assurance. Suitable for use in air, water, oil, natural gas and steam applications.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).Dixon Valve & Coupling Company manufactures pipe and hose fittings and accessories. The company, founded in 1916, is headquartered in Chestertown, MD.

    • ASIN: B00835NCNQ
    • Brand: Dixon
    • ASIN: B00835NCNQ
    • Part No: LJ200

  • Eaton Aeroquip 202414-6-8S 90 Degree Male Elbow, Extra Extra Long, JIC 37 Degree & NPT End Types, Carbon Steel, 1/2 JIC(m) x 3/8 NPT(m) End Size, 1/2" Tube OD, 3/8" Male Pipe Size

    Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.Eaton manufactures electrical, hydraulic, and mechanical power equipment. The company, founded in 1911, is headquartered in Dublin, Ireland.

    • ASIN: B008I4X6BA
    • Brand: Aeroquip
    • ASIN: B008I4X6BA
    • Part No: 202414-6-8S

  • Dixon T200 Carbon Steel Pipe and Welding Fitting, 150lbs ASA Forged Flange, 2" NPT Female

    This Dixon T series flange is used for joining two pieces of pipe or connecting valves in a piping system. It has a threaded lap joint with bolt holes for connecting to other bolted flanges or flat surfaces. It is made of forged carbon steel for tensile strength and hardness. This fitting has a maximum operating pressure of 150 pounds per square inch (psi) and meets American National Standards Institute (ANSI) Class 150 for quality assurance. Suitable for use in air, water, oil, natural gas and steam applications.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).Dixon Valve & Coupling Company manufactures pipe and hose fittings and accessories. The company, founded in 1916, is headquartered in Chestertown, MD.

    • ASIN: B00835NEB6
    • Brand: Dixon
    • ASIN: B00835NEB6
    • Part No: T200