Showing 1-10 of 50 results

Browse for Compass Sensor best prices at RankeDeal.com

  • UCTRONICS MPU-9255 9-Axis Sensor Module E-compass Accelerometer Gyroscope Magnetic Field

    Module Features Power supply:3-5v (internal low dropout regulator) Communication: standard IIC communication protocol Pitch:2.54mm Module size:15mm * 25mm Gyroscope Features Digitally-programmable low-pass filter Gyroscope operating current: 3.2mA Sleep mode current: 8uA Factory calibrated sensitivity scale factor Accelerometer Features Accelerometer normal operating current: 450uA Low power accelerometer mode current: 8.4uA at 0.98Hz, 19.8uA at 31.25Hz Sleep mode current: 8uA User-programmable interrupts Wake-on-motion interrupt for low power operation of applications processor Magnetometer Features Wide dynamic measurement range and high resolution with lower current consumption. Output data resolution of 14 bit (0.6uT/LSB) or 16 bit (15uT/LSB) Full scale measurement range is +/-4800uT Magnetometer normal operating current: 280uA at 8Hz repetition rate Self-test function with internal magnetic source to confirm magnetic sensor operation on end products Packing included: 1pcs UCTRONICS MPU-9255 9-Axis Sensor Module

    • ASIN: B01DIGRR8U
    • Brand: UCTRONICS
    • ASIN: B01DIGRR8U
    • Part No: U3630

  • Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055

    If you've ever ordered and wire up a 9-DOF sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer, gyroscope and magnetometer into actual "3D space orientation"! Orientation is a hard problem to solve. The sensor fusion algorithms (the secret sauce that blends accelerometer, magnetometer and gyroscope data into stable three-axis orientation output) can be mind-numbingly difficult to get right and implement on low cost real time systems.

    • ASIN: B017PEIGIG
    • Brand: Adafruit
    • ASIN: B017PEIGIG
    • UPC: 604310746278
    • Part No: 2472

  • WINGONEER GY-273 QMC5883L Triple Axis Compass Magnetometer Sensor Module For Arduino 3V-5V

    WINGONEER® trademark Reg.NO:4747611WINGONEER GY-273 QMC5883L Triple Axis Compass Magnetometer Sensor Module For Arduino 3V-5VSpecifications:Name: QMC5883L module (three-axis magnetic field module)Model: GY-273Use the chip: QMC5883LPower supply: 3-5vCommunication: IIC communication protocolMeasuring range: ± 1.3-8 GaussianSize: 13.9 * 18.5MMPackage Included:1x WINGONEER QMC5883L Triple Axis Compass Magnetometer Sensor Module For Arduino 3V-5V

    • ASIN: B06XHJDG1L
    • Brand: WINGONEER®
    • ASIN: B06XHJDG1L
    • UPC: 723466639415
    • Part No: JT0734

  • Comidox 1PCS HMC5883L GY-271 3V-5V Triple Axis Digital Compass Magnetometer Sensor Module Three-axis Magnetic Field Compass Module for Arduino IIC Board

    Note: The installation of electronic modules requires basic knowledge and requires a certain electronic professional foundation and hands-on ability. Please purchase carefully! It is Domestic Chip HMC5883, the program is not compatible with the original imported chip program. Please make sure to familiarize yourself with the original chip matching program and buy it again, thank you! Manual measurement, with small error. Please check size in detail before purchase. Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness. We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution. Package Includes: 1Pcs

    • ASIN: B07PKSXR1J
    • Brand: Comidox
    • ASIN: B07PKSXR1J
    • UPC: 661083459385
    • Part No: CP393

  • PNI RM3100 High-Accuracy Magnetometer Geomagnetism, Military-Grade Magnet Field Sensor, High-Revolution Electronic Compass Module, Magnetometer Compensation,Professional design for Development Project

    Product document: https://wiki.wit-motion.com/english(1)The RM3100 Geomagnetic Sensor is the highest performance sensor in its class with over 10 times better resolution and over 20 times lower noise than the leading Hall Efect sensor.(2) It makes precise magnetic field measurements, which enables accurate calculation tracking.(3) Geomagnetic sensors are used to measure the earth's magnetic field; however, in real world conditions, the earth's magnetic field is been distorted by other surrounding fields. System components such as batteries, shielding materials, or motors will distort the geomagnetic field near the sensors.(4) An additional design challenge is the changing magnetic environment that temporarily distorts the field like metal parts in furniture, a passing car, or nearby cell phones and computers. Geomagnetic sensors must first be able to see the different magnetic fields in order for the designer to separate earth's magnetic distortion error correction a snap, and ultimately allowing you to easily and accurately calculate absolute orientation and heading.Main Feature: 1 Input voltage: 3.3V 2 Consumption current: typical 10mA 3 interface:SPI 4 providing STM32 demon code

    • ASIN: B01N5QL0XC
    • Brand: WITMOTION
    • ASIN: B01N5QL0XC
    • UPC: 713752277506
    • Part No: PNI RM3100

  • Adafruit Flora Accelerometer/Compass Sensor - LSM303 [ADA1247]

    Add motion and direction sensing to your wearable FLORA project with this high precision 3-axis Accelerometer+Compass sensor. Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. By combining this data you can then orient yourself.We based this sensor on the latest version of this popular sensor, the LSM303DLHC. The sensor has a digital (I2C) interface. Attaching it to the FLORA is simple: line up the sensor so its adjacent to the SDA/SCL pins and sew conductive thread from the 3V, SDA, SCL and GND pins. They line up perfectly so you will not have any crossed lines. You can only connect one of these sensors to your FLORA, but you can connect other I2C sensors/outputs by using the set of SCL/SDA pins on the opposite side. Get started with the FLORA Accelerometer with our guide on the Adafruit Learning System ! It uses the same Arduino library as our conventional form LSM303 breakout. The example and library code will work 'out of the box' with FLORA. Simply download our library and connect the 3V/SCL/SDA/G...

    • ASIN: B00OKJFELC
    • Brand: Adafruit
    • ASIN: B00OKJFELC
    • UPC: 701980281815
    • Part No: 100462

  • WINGONEER MPU-9255 GY-9255 Attitude Sensor Compass Accelerator Gyro Module 3-5V I2C 9DO

    WINGONEER® trademark Reg.NO:4747611WINGONEER MPU-9255 GY-9255 Attitude Sensor Compass Accelerator Gyro Module 3-5V I2C 9DOFProduct Introduction:Model:GY-9255Chip:MPU-9255Voltage:3-5VCommunication Type:standard IIC communication protocol Built-In 16bit AD convertor,16 bit data output Gyroscope Range:+/-250/500/1000/2000 degree/sAcceleration Range:+/-2/4/6/8/16gMagnetic Field:+/-1200uTPin Space:2.54mmPackage includes:1x WINGONEER Magnetic Field Sensor Module

    • ASIN: B06XHK8BK6
    • Brand: WINGONEER®
    • ASIN: B06XHK8BK6
    • UPC: 723466639569
    • Part No: JT0749

  • Gy-521 MPU-6050 MPU6050 Module 3 Axis Analog Gyro Sensors+ 3 Axis Accelerometer Module

    Name: MPU-6050 modules (three-axis gyroscope + three-axis accelerometer) Use the chip: MPU-6050 Power supply: 3-5v (internal low dropout regulator) Communication modes: standard IIC communications protocol Chip built-in 16bit AD converter, 16-bit data output Gyroscope range: ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 ± 16g Immersion Gold PCB machine welding process to ensure quality Pin pitch 2.54mm

    • ASIN: B008BOPN40
    • Color: 1pcs
    • Brand: Generic
    • ASIN: B008BOPN40
    • UPC: 692011914492
    • Part No: Generic-MPU-6050

  • ABIGAIL A15124X Oxygen O2 Sensor OS5089 for Chysler Sebring Dodge Avenger Caliber Journey Jeep Compass Patriot Wrangler

    IMPORTANT NOTICE! ! ! Please check the plug and the wire length before purchase the sensor. The Amazon filter system may not be 100% accurate or up to date. Please do not leave one star review if purchase the wrong part , simply contact us or amazon ,we glad to help . Thank you for your understanding. Please check fitment notes & description for accurate information. Brand New Oxygen sensor. Wires: 4Length (Sensor to Lead): 13.5 inch (343 mm) Warranty: One year unlimited miles. Package Includes:1x Oxygen SensorProfessional and Fast Service We are equipped with enoughedge and able to solve all your questions quickly.Rock-Bottom Price Save up more than 40% from retail prices.We have confident in making you have a happy online-shipping experience

    • ASIN: B072V6YSSD
    • Brand: A ABIGAIL
    • ASIN: B072V6YSSD
    • UPC: 603717040545
    • Part No: A15124X

  • Casio Men's SGW100B-3V Digital Compass Twin-Sensor Sport Watch

    • ASIN: B00186YU4W
    • Color: Grey
    • Brand: Casio
    • ASIN: B00186YU4W
    • UPC: 751744825014
    • Part No: SGW100B-3V

  • Clipper Compass System w/Remote Fluxgate Sensor

    • ASIN:
    • Model: CL-C
    • Color: BeigeStandard