Showing 1-10 of 468 results

Browse for Headers 4 Small Block best prices at RankeDeal.com

  • For Chevy Big Block Long Tube V8 4-1 Design 2-PC Stainless Steel Exhaust Header - 396 402 427 454

    The exhaust manifolds found on the 1967-1972 Big Block Chevy engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 Long Tube off-road headers are designed to allow the exhaust gasses to flow more freely from each cylinder bank and combine in a more efficient manner. Tubing has been optimized for the 396, 402, 427 and 454 engines. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Header exhaust systemAll necessary installation hardware

    • ASIN: B00SXVDANM
    • Brand: Auto Dynasty
    • ASIN: B00SXVDANM
    • Part No: AD-HDS-BBC-LT

  • For Chevy Small Block 2x4-1 Design Stainless Steel Exhaust Header Kit T1 (Polished Chrome) 267-400 V8

    The exhaust manifolds found on the 1965-1974 Small Block Chevy engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 Long Tube Style off-road headers are designed to allow the exhaust gasses to flow more freely from each 4 cylinder bank and combine in a more efficient manner. Tubing has been optimized for the Small Block 283/302/305/307/327/350/400 cubic inch engines. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Set of exhaust headerAll necessary hardware, bolts, and gasketsNotes:Fits Small Block Chevy motors only. Will not fit Big Block equipped vehicles

    • ASIN: B00SXVBTNU
    • Brand: Auto Dynasty
    • ASIN: B00SXVBTNU
    • Part No: AD-HDS-SBC-SS-T1

  • For Chevy Small Block Hugger 2x4-1 Tight Fit Design Stainless Steel Exhaust Header Kit (Polished Chrome) Angle Head

    The exhaust manifolds found in the 1966-1996 Small Block Chevy engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 Block Hugger off-road headers are designed to allow the exhaust gasses to flow more freely from each cylinder bank and combine in a more efficient manner. Block Hugger style headers are meant to be used where space for long tube headers isn?t available due to steering and cross member clearance issues. Tubing has been optimized for the 5.0L(305ci), 5.3L(327ci), 5.7L(350ci), and 6.6L(400ci) engines. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Header exhaust systemAll necessary installation hardware

    • ASIN: B00NI73JWI
    • Brand: Auto Dynasty
    • ASIN: B00NI73JWI
    • Part No: AD-HDS-SBC-AP

  • Small Block Street Rod LS1 LS6 LM Swap Engine Stainless Steel 4-1 Hugger Style Header/Exhaust Tubular Manifold

    Getting more air into your engine and more exhaust out is the key to a performance motor. That's where exhaust headers is significant as the first revenue of an exhaust system. Exhaust performance headers manipulate the air flow with the performance-robbing exhaust manifold that came with your car. Headers provide each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders; thus, the backpressure that occurs in common exhaust manifolds. When cylinders don't have to fight with each other to expel their exhaust, they can put more power through the wheels, pushing the vehicle. Combining with a high performance cold air intake, and a cat-back exhaust system, a header system removes all restrictions of your engine, then, it is able to perform at its full potential.Package Included:1 x Pair of Headers1 x Pair of Reducer Collector1 x Set of Gaskets/HardwareCompatible with:For Street Rod Models with LS Gen III /IV Engines

    • ASIN: B018A54S9U
    • Brand: Auto Dynasty
    • ASIN: B018A54S9U
    • Part No: AD-HDS-LS1LS6-HUGGER

  • For Chevy Small Block V8 4-1 Design 2pcs Black Coated Stainless Steel Exhaust Header Kit

    The exhaust manifolds found in the 1966-1996 Small Block Chevy engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 Block Hugger off-road headers are designed to allow the exhaust gasses to flow more freely from each cylinder bank and combine in a more efficient manner. Block Hugger style headers are meant to be used where space for long tube headers is not available due to steering and cross member clearance issues. Tubing has been optimized for the 5.0L(305ci), 5.3L(327ci), 5.7L(350ci), and 6.6L(400ci) engines. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound. Please note these Block Hugger Headers are a semi universal header. The application guide attached is for reference of the engines these headers will fit. The headers are not direct fit to any factory y-pipe. Exhaust fabrication will be required when installing these headers on your vehicle.Package Included:1 x Pair of Exhaust Manifold Headers1 x Pair of Exhaust Manifold Header ReducersCompatible with:ALL Small Block Chevy V8 Engines from '55+ using the Standard Exhaust Pattern -...

    • ASIN: B01H97W7TI
    • Color: Black Coated
    • Brand: Auto Dynasty
    • ASIN: B01H97W7TI
    • Part No: AD-HDB-SBC-SB

  • For Chevy Gen 2 Mark IV Big Block V8 2 x 4-1 Stainless Steel Shorty Exhaust Header w/Circle Port

    The exhaust manifolds found in the 1965-1973 Chevy and GMC Big Block engine were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 Mid-Length off-road headers are designed to allow the exhaust gasses to flow more freely from each 4 cylinder bank and combine in a more efficient manner. Tubing has been optimized for the 6.5L (396ci), 6.6L(402ci) 7.0L(427ci) and 7.4L(454ci) engines. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Exhaust Header2 x Collector PipesMetal GasketsAll Necessary Installation Hardware

    • ASIN: B00NI73H1Q
    • Brand: Auto Dynasty
    • ASIN: B00NI73H1Q
    • Part No: AD-HDS-BBC-MID

  • For Ford Big Block Hugger BBC V8 Engine 4-1 Stainless Steel Shorty Header Exhaust Manifold - 429 460

    The exhaust manifolds found on the 1970-1978 Big Block Ford engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 Block Hugger Style off-road headers are designed to allow the exhaust gasses to flow more freely from each cylinder bank and combine in a more efficient manner. Block Hugger style headers are meant to be used where space for long tube headers isn?t available due to steering and cross member clearance issues. Tubing has been optimized for the 429 and 460 engines. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Set of Exhaust HeadersCompatible with:68-87 Ford Big Block V8 Engine 429/ 460Notes:Modification may be required for proper fitment

    • ASIN: B00VC8PVPS
    • Brand: Auto Dynasty
    • ASIN: B00VC8PVPS
    • Part No: AD-HDS-F429

  • For 67-81 Chevy Small Block F-Body SBC 265-400 4-1 Design Stainless Steel Clipster Exhaust Header/Manifold

    The exhaust manifolds found in the 1967-1981 Chevrolet Camaro engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 Mid-Length Style off-road headers are designed to allow the exhaust gasses to flow more freely from each 4 cylinder bank and combine in a more efficient manner. Tubing has been optimized for the Small Block 4.9L(302ci), 5.0L(305ci), 5.0L(307ci), 5.3(327ci), 5.7L(350ci) and 6.6L(400ci) engines. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Header exhaust systemAll necessary installation hardware

    • ASIN: B00SXVBX6S
    • Brand: Auto Dynasty
    • ASIN: B00SXVBX6S
    • Part No: AD-HDS-SBC-CLI

  • NEW SOUTHWEST SPEED CERAMIC COATED TIGHT-FIT BLOCK HUGGER HEADERS FOR CHEVY ZZ-4 CRATE ENGINES, 92-NEWER LT-4 STYLE D-PORT HEADS, 1 5/8" TUBES, STREET ROD, HOT ROD, RAT ROD, NOSTALGIA VINTAGE MODEL A

    Pair of Brand New Southwest Speed Ceramic Hot Coated Tight-Fit Block Hugger Headers that fit 1994 and later LT-4 Style D-Port Heads, and ZZ-4 Crate Engines (SWS Part # 440-2077). This Pair of Southwest Speed Block Hugger Shorty Headers are great for close or tight fit applications. They will only fit 1994 and later LT-4 Style D-Port Heads, and ZZ-4 Crate Engines in many different applications and are great for engine swaps where a specifically designed header is not available. These headers are Ground parallel with .380" flanges on the cylinder head surface, and feature 1-5/8" Primary tubes with 2 1/2" ball flange collectors, complete with header bolts and gaskets. Ball Flange collectors are an OEM Donut style seal, so no gaskets or collector reducers are needed. Fits angle or straight plug heads, 1992-and-later LT4 Style D-Port Heads, and ZZ-4 Crate Engines with no spark plug or spark plug wire restrictions. Note: Refer to measurement chart to insure headers will fit your vehicle and application. Features: 1-5/8" primaries to the 2 1/2" Collectors Features Ball Flange collectors to connect exhaust under the vehicle Ideal for Engine Swaps Tightest fitting and most compact header we sell Great for Hot Rods, Rat Rods, Street Rods, and any Nostalgia Rod More Performance Better F...

    • ASIN: B0716RMSH1
    • Color: Ceramic Coated
    • Brand: Southwest Speed
    • ASIN: B0716RMSH1
    • Part No: 440-2077

  • Small Block Fits Chevy Lake Style Header Kit, 1-5/8 Tube, 4 Inch Cone

    Vintage style street rods are hotter than ever, and nothing gives your fenderless rod an authentic dry lakes competition look like a set of lakester headers. These lake style header kits allow you to build your own weld up headers and tailor them to your vehicle. All tubing comes pre-bent. Tapered cones can be trimmed as needed. Lakester header kit includes parts to complete both sides.5/16" thick flanges16 ga. pre-bent tubingCollector flanges w/ block-off platesFlanges for connecting an under-car exhaust system (2.5" O.D.)Gaskets & boltsItem Details1-5/8" primaries30" x 4" cones

    • ASIN: B075FGQMMT
    • Brand: Speedway Motors
    • ASIN: B075FGQMMT
    • Part No: 9300560