Showing 1-10 of 59 results

Browse for High Steer Knuckles best prices at RankeDeal.com

  • Reid Racing JK001L Heavy Duty Dana 30 And 44 High Steer Knuckle Left For 2007-10 Jeep Wrangler JK

    HEAVY DUTY JEEP JK HIGH STEER KNUCKLE LEFTProduct DescriptionThe new Jeep Wrangler JK Dana 30/Rubicon 44 knuckles are heavy duty stock replacement knuckles. Raised steering linkage, dual steering stops, and increased strength are the primary improvements while installation is simplified by allowing the OEM "outers" to be reused.Sold individuallyJK001L (left, driver's side)JK001R (right, passenger's side)Uses stock 2007+ Jeep Wrangler JK brake rotors, calipers, stub shafts and U-joints.Fits JK Dana 30, JK Rubicon Dana 44, and Mopar & aftermarket JK axles.Easy bolt-on installation with no machining required.Aftermarket high strength axle shafts, U-joints/CV joints, and stub shafts can be used.Antilock Brakes, Traction Control, and Electronic Stability Control systems remain fully operational.Steering linkage is raised as high as possible while retaining clearance for OEM Jeep and most aftermarket wheels.Tie Rod gains 1.5 inches of clearance to minimize vulnerability to trail damage.Drag Link is flipped and gains 3 inches of height to perfectly correct the steering geometry for the common 3-4 inch suspension lift; minimizes additional steering correction for taller suspension lifts. Requires an aftermarket drag link, and we recommend a track bar bracket to eliminate bump steer. Work...

    • ASIN: B003EM8USK
    • Brand: Reid Racing
    • ASIN: B003EM8USK
    • Part No: JK001L

  • TeraFlex 4828490 Knuckle Kit (TJ/YJ High Steer)

    The TeraFlex TJ high steer knuckle kit is designed to be used with 4+" of lift, and will help to maximize steering component ground clearance and assist in easy correction of steering geometry. Note: The high steer knuckle kit is not an all inclusive kit. Additional modifications will be required that are not included in the TeraFlex high steer knuckle kit. These modifications include new tie rod and drag link, and may include front sway bar links, front track bar mounting, and offset wheels.

    • ASIN: B006D9W61S
    • Brand: Teraflex
    • ASIN: B006D9W61S
    • UPC: 843885026143
    • Part No: 4828490

  • Reid Racing JK001R Heavy Duty Dana 30 And 44 High Steer Knuckle Right For 2007-10 Jeep Wrangler JK

    HEAVY DUTY JEEP JK HIGH STEER KNUCKLE RIGHT

    • ASIN: B003EM75CW
    • Brand: Reid Racing
    • ASIN: B003EM75CW
    • Part No: JK001R

  • TeraFlex 4390870 JK High Steer Knuckle Kit

    The Tera Flex JK high steer knuckle is cast from heavy duty ductile iron and features reinforcements in key section areas that are prone to stress and deflection, and provides a heavy duty solution for several weak vulnerabilities found in the stock JK axle steering configuration. This kit is designed to work perfectly on JK Wranglers with 4-6" of lift, and will maintain steering geometry at the correct angles for superior highway drivability and increases tie rod ground clearance by over 1-1/8" to reduce tie rod damage and bending. This kit includes one driver high steer knuckle and one passenger high steer knuckle. Fits all JK Wrangler models including Rubicon and Unlimited.

    • ASIN: B01300F0YW
    • Brand: Teraflex
    • ASIN: B01300F0YW
    • UPC: 843885032601
    • Part No: 4390870

  • TeraFlex 4390975 High Steer Knuckle with Drag Link Flip Kit (JK HD)

    The TeraFlex JK/JKU Dana 30 and 44 High Steer System addresses all of the front-end steering issues associated with JK Wrangler and JKU Wrangler Unlimited models with 4-6" lift kits by maintaining proper steering geometry for superior highway drivability. "Flipping" the Heavy-Duty Drag Link (50% stronger than factory) over the Knuckle helps eliminate front-end shimmy and other alignment issues, while the Front Track Bar Drop Bracket corrects steering geometry. The Frame Brace reinforces the frame further reducing excessive movement and front-end shimmy. The new Drag Link threads into the factory adjusting sleeve and uses a tapered insert to mount to the Knuckle. This comprehensive kit combines our High Steer Knuckle Kit with our complete Drag Link Flip Kit, and Front Track Bar Drop Bracket and Frame Brace Kit. Compatible with all factory and aftermarket axle shafts, ball joints, wheel hubs, and tie rods and does not affect operation of factory stability and traction control systems including ESP and ABS.

    • ASIN: B013004SH2
    • Brand: Teraflex
    • ASIN: B013004SH2
    • UPC: 843885034568
    • Part No: 4390975

  • Rancho RS62100 Steering Knuckle

    The Rancho(R) RockGEAR(R) high-steer knuckles maintain steering geometry and add strength to the most vulnerable points within the steering envelope when off-road driving. The knuckles add an additional 1.5-inches of clearance within the tight space, helping to protect critical steering components, and their design also helps lift the steering linkage out of range from direct impact from off-road obstacles or impediments. The high-steer knuckles are precisely engineered and heavy-duty for Left hand and Right Hand Drive, 3-inch and higher lifted Jeep Wrangler JKs. The kit includes: a front left high-steer knuckle, a front right high-steer knuckle and three-inch bump stops. This product offers a limited lifetime warranty. A three-inch track bar relocation bracket is required and is sold separately if you lift does not have one. (RS62101). A flipped Draglink is also required and is sold separately. (RS62102)

    • ASIN: B01I8SRCXI
    • Brand: Rancho
    • ASIN: B01I8SRCXI
    • UPC: 039703007856
    • Part No: RS62100

  • Trail-Gear Toyota Knuckle Service Kit

    When was the last time you serviced your knuckles? Our service kit contains all standard replacement parts including gaskets, felts, seals, washers and shims. Kit includes inner axle seals and outer felt covers. The outer felt covers are not found in other kits and are a Trail Gear Exclusive. If you're using your truck in the rocks you will want to replace these covers when you service the knuckles. Knuckle kit has all the parts you need to services both left and right knuckles.

    • ASIN: B008OJ3RTU
    • Brand: Trail Gear
    • ASIN: B008OJ3RTU
    • Part No: Trail-Gear

  • Jeep Dana 30 Axle High Steer Kit Flips Tie Rod for More Clearance at Tie Rods

    Brand new JEEP HIGH STEER KIT for Dana 30 axle that flips the tie rod over the knuckle for the models listed below. This does the driver side, some vehicles can do both passenger and drivers side in which case you will need to order two kits. Please check fitment to make sure your passenger side can be flipped. This comes with a machined steel bushing designed for perfect fitment and it comes with a lock nut to put on once its installed. We do recommend welding the steel bushing in place once installed. Will work on Dana 30 axles only. This is a quick and easy upgrade for any rig and its an item you should get today! MAKE and MODEL: Jeep CJ 1984-2001 Jeep Cherokee XJ 1993-1998 Jeep Grand Cherokee ZJ 1997-2006 Jeep Wrangler TJ 2007-Present Jeep Wrangler JK These may require extra modification and drilling: 1999-2004 Jeep Grand Cherokee WJ

    • ASIN: B008IJSX54
    • Brand: Rukse
    • ASIN: B008IJSX54
    • UPC: 765573846096
    • Part No: RK3600

  • GPRDNA New Design - TRIPLE Jeep Dana 30 Axle High Steer Kit Flips Tie Rod with BLACK Tie Rod Boots fits Jeep XJ TJ YJ ZJ WJ

    Brand new TRIPLE JEEP HIGH STEER KIT for Dana 30 axle that flips the tie rod and drag link over the knuckle for the models listed below. This does the driver and passenger side, and the drag link a triple flip kit. This comes with 3 machined steel bushings designed for perfect fitment and it comes with castle nuts and cotter pins to put on once its installed. We do recommend welding the steel bushing in place once installed. Will work on Dana 30 axles only. This is a quick and easy upgrade for any rig and its an item you should get today! GET FREE polyurethane Tie Rod Boots in Black to help protect those tie rods you are going to flip a $14.95 dollar value for FREE! MAKE and MODEL: Jeep CJ 1984-2001 Jeep Cherokee XJ 1993-1998 Jeep Grand Cherokee ZJ 1997-2006 Jeep Wrangler TJ 2007-Present Jeep Wrangler JK 1999-2004 Jeep Grand Cherokee WJ

    • ASIN: B07DKT47N5
    • Brand: Rukse
    • ASIN: B07DKT47N5
    • Part No: GPR3607

  • GPRDNA NEW Design - DUAL Dana 30 Axle High Steer Kit Flips Tie Rod for More Clearance at Tie Rods Fits Jeep Dana 30 Axles XJ YJ TJ ZJ and More

    Brand new DUAL JEEP HIGH STEER KIT for Dana 30 axle that flips the tie rod over the knuckle for the models listed below. This does the driver and passenger side. This comes with two machined steel bushings designed for perfect fitment and it comes with a castle replacement nut and cotter pins to put on once its installed. We do recommend welding the steel bushing in place once installed. Will work on Dana 30 axles only. This is a quick and easy upgrade for any rig and its an item you should get today! MAKE and MODEL: Jeep CJ Models ALSO FITS: 1984-2001 Jeep Cherokee XJ | 1993-1998 Jeep Grand Cherokee ZJ | 1997-2006 Jeep Wrangler TJ | 2007-Present Jeep Wrangler JK | These may require extra modifications: 1999-2004 Jeep Grand Cherokee WJ

    • ASIN: B07DH39G9Y
    • Brand: Rukse
    • ASIN: B07DH39G9Y
    • Part No: RK3601N

  • Redcat Racing 13860 Plastic High Steer Knuckle

    • ASIN:
    • Model: 13860
    • Color: Multicolor