Showing 1-10 of 256 results

Browse for Hollow Steel Tube best prices at RankeDeal.com

  • Hot Rolled Steel Square Tubing, ASTM A-36, 2" x 2", 0.12" Wall, 24" Length

    The A36 carbon steel square tubing has been hot rolled and meets American Society for Testing and Materials International ASTM A36 specifications. The A36 carbon steel grade is a structural steel that has better formability than 1018 carbon steel. The tubing has been hot rolled, a method of compressing metal between two rollers at a temperature above the material’s recrystallization temperature to attain the specified dimensions.Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. Carbon steels, which include most AISI-SAE grades in the 1000 range, are classified by their level of carbon content as low (below 0.3%), medium (0.3% to 0.6%) and high (0.6% and above). Alloy steels, which include AISI-SAE grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance. Tool steels, which include most grades with a letter and number grade designation, have high carbide content for wear resistance, high hardness, and the ability to hold a...

    • ASIN: B000H9M49E
    • Brand: Small Parts
    • ASIN: B000H9M49E
    • Part No: 10343

  • Online Metal Supply 304 Stainless Steel Round Tube, 3/4" OD x 0.035" Wall x 72" Long, Seamless

    Seamless Stainless Steel Round Tube offers a smooth surface both on inside and outside diameters, to allow smooth fluid transfer while offering increased overall psi ratings over welded tube. 304 Stainless Steel is one of the most widely used stainless steel grade. It offers good heat resistance, as well as resistance to chemicals, acids, and atmospheric conditions. It can be formed and readily welded by all methods.304 Seamless Stainless Steel Round Tube3/4" OD x 0.035" Wall x 0.68" IDLength: 72 inchesFinish: Cold Finished, Annealed and PickledWall Type: Seamless

    • ASIN: B07NZ8CTTZ
    • Brand: Online Metal Supply
    • ASIN: B07NZ8CTTZ
    • Part No: 7426982007623

  • Online Metal Supply Steel Mechanical Square Tube, 1-1/4" x 1-1/4" x 0.12 (11 ga.) x 24 inches

    Steel Mechanical Tubing is an electric resistance welded tube made from low carbon steel. Walls heavier than 18 ga. Are produced from hot rolled steel and walls lighter than 18 ga are produced from cold rolled steel. OD is flash removed, ID is flash in. Meets ASTM A513 Type 1 (Hot Rolled) or Type 2 (Cold Rolled). Mechanical Steel Square TubeSize: 1.250 (1-1/4 inch) x 1.250 (1-1/4 inch)Wall: 0.12 inchLength: 24 inchesWeight: 1.8 lbs per footNotes: Walls heavier than 18 ga. Are produced from hot rolled steel and walls lighter than 18 ga are produced from cold rolled steel. OD is flash removed, ID is flash in.

    • ASIN: B07T49R86Q
    • Brand: Online Metal Supply
    • ASIN: B07T49R86Q
    • Part No: 7427003821181

  • Online Metal Supply 316 Stainless Steel Round Tube, 1" OD x 0.120" Wall x 60" Long

    Welded Stainless Steel Tube is the most commonly produced type of stainless tube available. It has flash removed on outside diameter and provides a smooth bright finish with little or no evidence of a seam. 316 Stainless Steel has better corrosion and pitting resistance as well as higher strength at elevated temperatures than the 304 alloy. It can be formed and readily welded by all methods.316 Welded Stainless Steel Round Tube1" OD x 0.120" Wall x 0.760" IDLength: 60 inchesFinish: Cold Finished, Annealed and PickledWall Type: Welded

    • ASIN: B07P5NVTHX
    • Brand: Online Metal Supply
    • ASIN: B07P5NVTHX
    • Part No: 7426982048084

  • Online Metal Supply Steel Mechanical Square Tube, 1-1/4" x 1-1/4" x 0.083 (14 ga.) x 36 inches

    Steel Mechanical Tubing is an electric resistance welded tube made from low carbon steel. Walls heavier than 18 ga. Are produced from hot rolled steel and walls lighter than 18 ga are produced from cold rolled steel. OD is flash removed, ID is flash in. Meets ASTM A513 Type 1 (Hot Rolled) or Type 2 (Cold Rolled). Mechanical Steel Square TubeSize: 1.250 (1-1/4 inch) x 1.250 (1-1/4 inch)Wall: 0.083 inchLength: 36 inchesWeight: 1.317 lbs per footNotes: Walls heavier than 18 ga. Are produced from hot rolled steel and walls lighter than 18 ga are produced from cold rolled steel. OD is flash removed, ID is flash in.

    • ASIN: B07SZ22T4L
    • Brand: Online Metal Supply
    • ASIN: B07SZ22T4L
    • Part No: 7427003820894

  • Stainless Steel 316L Welded Round Tubing, 1/4" OD, 0.218" ID, 0.020" Wall, 12" Length

    This 316/316L stainless steel dual-certified round tubing is suitable for transport of fluids and gases in chloride environments. The tubing is welded and drawn for a smoother bore than non-drawn welded tubing and a more consistent wall thickness than seamless tubing. It is alloyed with molybdenum and has higher resistance to pitting and crevice corrosion in chloride environments than 304 stainless steel. The tubing is annealed to restore formability for bending or flaring the tubing and has an operating temperature range of -325 to +1,500 degrees F. This welded and drawn round tubing meets American Society for Testing and Materials (ASTM) A269 specifications for quality assurance and is suitable for use in applications such as food and beverage preparation equipment in wash down environments.Metal tubing, also called fractional tubing, is used to transfer liquids, air, or solids, and it is characterized by a round shape and a hollow center. Metal tubing is commonly made with various grades of austenitic stainless steel, aluminum, copper, brass, and titanium materials and their alloys. Construction types include seamless, welded, or welded and drawn. Seamless tubing has no seam or weld point, which enables it to better withstand high pressure and resist corrosion. Welded tubing, ...

    • ASIN: B004XN8LE2
    • Brand: Small Parts
    • ASIN: B004XN8LE2
    • Part No: s0250020t316wal 1'

  • Stainless Steel 316L Seamless Round Tubing, 1/8" OD, 0.027" ID, 0.049" Wall, 12" Length

    This 316L stainless steel round tubing is suitable for transport of fluids and gases in chloride environments. The tubing is seamless for a smoother interior flow and greater burst strength than welded tubing. It has is alloyed with molybdenum and has higher resistance to pitting and crevice corrosion in chloride environments than 304 stainless steel. The tubing is annealed to restore formability for bending or flaring the tubing and has an operating temperature range of -325 to +1,500 degrees F. This seamless round tubing meets American Society for Testing and Materials (ASTM) A269 specifications for quality assurance and is suitable for use in applications such as food and beverage preparation equipment in wash down environments.Metal tubing, also called fractional tubing, is used to transfer liquids, air, or solids, and it is characterized by a round shape and a hollow center. Metal tubing is commonly made with various grades of austenitic stainless steel, aluminum, copper, brass, and titanium materials and their alloys. Construction types include seamless, welded, or welded and drawn. Seamless tubing has no seam or weld point, which enables it to better withstand high pressure and resist corrosion. Welded tubing, made by rolling and welding metal sheet stock, is weaker than a...

    • ASIN: B004XN9ZWO
    • Brand: Small Parts
    • ASIN: B004XN9ZWO
    • Part No: S0125049T316SAL 1'

  • Stainless Steel 304L Welded Round Tubing, 1/2" OD, 0.43" ID, 0.035" Wall, 36" Length

    This 304/304L stainless steel dual-certified round tubing is suitable for transport of fluids and gases in food processing environments. The tubing is welded and drawn for a smoother bore than non-drawn welded tubing and a more consistent wall thickness than seamless tubing. It has greater corrosion resistance than 302 stainless steel and is annealed to restore formability for bending or flaring. This welded and drawn round tubing meets American Society for Testing and Materials (ASTM) A269 specifications for quality assurance and is suitable for use in applications such as transporting beer, wine, and milk.Metal tubing, also called fractional tubing, is used to transfer liquids, air, or solids, and it is characterized by a round shape and a hollow center. Metal tubing is commonly made with various grades of austenitic stainless steel, aluminum, copper, brass, and titanium materials and their alloys. Construction types include seamless, welded, or welded and drawn. Seamless tubing has no seam or weld point, which enables it to better withstand high pressure and resist corrosion. Welded tubing, made by rolling and welding metal sheet stock, is weaker than and not as rounded as seamless tubing, but it has a more consistent wall thickness for tighter wall tolerances. Welded and draw...

    • ASIN: B004XN8H78
    • Brand: Small Parts
    • ASIN: B004XN8H78
    • Part No: s0500035t304wal 3'

  • 1/2" OD x 6 ft. Welded 316 Stainless Steel Tubing

    'Tubing, Welded, Inside Dia .460 In, Outside Dia 1/2 In, Length 6 ft, Wall Thickness .020 In, Outside Dia Tolerance +.010 In/-0.010 In, 316 Stainless Steel, Max Pressure 1337 PSI At 72 Degrees F, Temp Range -325 To 1500 Degrees F, Meets ASTM 269'

    • ASIN: B075HKLWQT
    • Brand: GRAINGER APPROVED
    • ASIN: B075HKLWQT
    • Part No: 3ADN2

  • 1" OD 3A Polished Stainless Steel Tubing, 316L, Welded, 16 Gauge (.065") - 3' Length

    3' length of 1" OD 3A Polished Stainless Steel Welded Tubing with a 16 gauge (0.065") wall. This polished tubing undergoes multiple passes through the polishing heads to remove any unwanted residue, resulting in a mechanically polished 20Ra Max inner diameter (ID) and 32Ra Max outer diameter (OD). The resulting product meets or exceeds both ASTM A270-S2 and 3A specifications.This tubing undergoes a rigorous quality inspection, including destructive and non-destructive examination, at the mill prior to shipment.Please allow for a cut tolerance of +/- 1/8" on all lengths. This product ships with a 2 mil poly protective sleeve to maintain the surface finish.Call regarding any bulk orders greater than 100'.

    • ASIN: B00ZSWL0MC
    • Brand: RathGibson
    • ASIN: B00ZSWL0MC
    • Part No: T-0100-W-A270S2-065-6-3A-K3

  • Seachoice 30561 Stainless Steel Hollow Base 4.5-Inch Boat Dock and Anchor Line Cleat

    • ASIN:
    • Model: 30561
    • Color: SilverStainless Steel
    • Size: 1/24-1/2"

  • Attwood Cleat Hollow Base, 8"

    • ASIN:
    • Model: 66010L3
    • Color: UnspecifiedOther

  • Cobra Anchors 137Y .18 In. Steel Hollow Wall Anchor

    • ASIN:
    • Model: 137Y
    • Color: Multicolor
    • Size: PK