Showing 1-10 of 818 results

Browse for Inductive Loop Detectors best prices at RankeDeal.com

  • Loop Vehicle Sensor and Detector for Safety and Exit for Gates and for Traffic Signal Controls With Visual and Audible Feed Back 12-24 Volt AC-DC Universal Works With All Types of Systems

    FAST, INTELLIGENT AND RELIABLE INDUCTIVE LOOP VEHICLE DETECTOR The Amazing Beam Detector is a single channel, standalone highly sensitive inductive loop detector designed for vehicle access applications. The detector is responsive, highly sensitive, and utilizes sophisticated software algorithms which adapt to prevent false triggering due to changing environmental conditions. Easy to use dip switches, as well as visual and audible feedback of inductive loop operation, ensure a hassle-free installation experience. Typical uses include free-exit loops, safety loops, closing loops for traffic barriers, arming loops for access control equipment, and general vehicle sensing applications. Main features Very fast detection speed for quick response times Detection filter and high-level circuit and loop protection provides excellent immunity to interference from external sources for improved reliability Easy to install and commission saving you time and money Audible and visual diagnostics for ease of set up and maintenance Removable terminals for quick and easy maintenance Boot-loader interface for ease of firmware upgrades Dedicated reset button to assist with quick maintenance procedures Wide, adaptive self-tuning range for outstanding reliability Excellent, strong loop field strength ...

    • ASIN: B01MG05Z0R
    • Brand: AMAZING BEAM
    • ASIN: B01MG05Z0R
    • UPC: 646791565344
    • Part No: FLUXS

  • EDI LMA-1250 Loop Detector for Detection of Vehicles, Inductive Loop

    Single channel with programmable dual relay output. The DEFLECTOMETERTM display helps optimize the proper sensitivity setting to detect all vehicles including motorcycles. NO MORE GUESS WORK WHEN SETTING SENSITIVITY! The LMA-1250 Series offer two models to

    • ASIN: B01LX5SORS
    • Brand: EDI Traffic
    • ASIN: B01LX5SORS
    • Part No: 4753464

  • Wal front PD132 Vehicle Loop Detector Single Channel Inductive Detector for Car Parking Lot Gate Traffic Control

    Feature: Sensitivity Boost : This feature sets the undetected level to maximum sensitivity and is used  to prevent loss of detection of high-bed vehicles Switch Selectable Sensibility: 4 sensitivity setting are available on the switches to allow flexibility in configuration Switch Selectable Frequency: 4 frequency settings are available to prevent cross-talk between adjacent loops Filter Option: This option is used to provide a delay between detection of the vehicle and switching of the output relay . This relay is normally used to prevent false detection of small or fast moving objects Specifications: Supply voltage: 220VAC; Power: 4.5VA; Output relays: 240V/5A Operating temperature: -20~65°C; Storage temperature: -40~85°C Frequency range: 20 kHz to 170 kHz; Temperature compensation: 50°C/ h Reaction time: 10ms; Signal holding time: Unlimited/limited Sensitivity: Higher:0.02%; high:0.05%; low:0.1%; lower:0.5% Loop inductance: Total loop plus connection wiring:50μH to 1000μH. Ideal is 100μH to 300μH Loop connection: wiring 200 meters long. The total resistance is less than 80hm, twisted at least 20 times per meter Relative humidity:

    • ASIN: B07K1BNL59
    • Brand: Wal front
    • ASIN: B07K1BNL59
    • UPC: 757686739792
    • Part No: 0

  • Vehicle Loop Detector,PD132 Single Channel Inductive Vehicle Loop Detector Sensor,Selectable Pulse Time Exit Safety Sensor Detector,for The Car Detector

    specifications: Supply voltage 220VAC Power 4.5VA Output relays 240V/5A Operating temperature -20~65°C Storage temperature -40~85°C Frequency range 20 kHz to 170 kHz Temperature compensation 50°C/ h Reaction time 10ms Signal holding time Unlimited/limited Sensitivity Higher:0.02% high:0.05% low:0.1% lower:0.5% Loop inductance Total loop plus connection wiring: 50μH to 1000μH. Ideal is 100μH to 300μH Loop connection wiring 200 meters long. The total resistance is less than 80hm, twisted at least 20 times per meter Relative humidity

    • ASIN: B07PX2YDC2
    • Brand: Jectse
    • ASIN: B07PX2YDC2
    • UPC: 703633781871
    • Part No: Jectse752hxuwm13

  • AC110V Car Park Barrier Loop Detectors PD132 Inductive Vehicle Loop Detector/Loop Sensor for Vehicle Access

    Packing Including: 1 x Vehicle Loop Detector Functions & Features : 1) Reset Switch : The reset switch enables the detector to be manually reset during registering and testing and it is a process of system recovery; 2) Selectable Pulse Time : This feature sets the length of time that the pulse relay will be lasting for 1 Second or 0.5 Seconds ; 3) Pulse Relay Selection : The Pulse Relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop; 4) Sensitivity Reinforcement : This feature sets the un-detecting level to a maximum sensitivity to prevent failing to detect vehicles as big trucks; 5) Filtering Option : This option is used to provide a delay between detection of the vehicle and switching of the output relay . This relay is normally used to prevent false detection of small or fast moving objects ; 6) Permanent Presence Option : This feature ensures the detection of the vehicle will be maintained when the vehicle stays within the loop area for extended periods Technical Data: 1. Supply voltage: AC110V 2. Voltage tolerance AC: +10% / -15% 3. Voltage tolerance DC: ±15% 4. Power Consumption: 4.5VA 5. Operating temperature: -20°C to +65°C 6. Storage temperature: -40°C to +85°C 7. Frequency range: 20 kHz to 170 kHz 8. Reaction time: 10m...

    • ASIN: B07H3N41H4
    • Brand: MENGQI-CONTROL
    • ASIN: B07H3N41H4
    • Part No: Loop Detector

  • 50M/Roll Traffic Inductive Loop Vehicle Detector Induction Coil Wire Cable

    Technical Data Cross sectional area: 1.0㎜² Conductor structure line number / wire diameter: 19*0.26mm Insulation thickness: 0.35mm The average diameter: 2.0mm 20℃ conductor DC resistance: 19 Ω/km Voltage: 600V Working temperature: -80~+250oc Conductor: twisted nickel plated copper wire Insulation: PFA Teflon Color: Red Package: 50m/lot

    • ASIN: B019V5E80C
    • Brand: KingGo
    • ASIN: B019V5E80C
    • UPC: 738770742768
    • Part No: KG-63

  • EDI LMA-1150 Loop Detector for Detection of Vehicles, Inductive Loop

    Single channel with programmable single relay output. The DEFLECTOMETERTM display helps optimize the proper sensitivity setting to detect all vehicles including motorcycles. NO MORE GUESS WORK WHEN SETTING SENSITIVITY! The LMA-1150 Series offer two models

    • ASIN: B007P9EDOS
    • Brand: EDI Traffic
    • ASIN: B007P9EDOS
    • Part No: EDI-LMA-1150-LV

  • Detector, Inductive loop Vehicle, 12/24 VDC & 24 VAC Fail Safe, LMA-1250-LV Loop Detector

    Single channel Dual programmable relay outputs Automatic tuning Lightning and surge protection Four (4) frequency levels Compatible with all radio controls and remote openers Sensitivity boost Fail safe and fail secure configurations Separate color-coded led indicators Wide look inductance range: 20 to 2500 microhenries

    • ASIN: B00EV2II9S
    • ASIN: B00EV2II9S
    • Part No: 395-00011

  • PD132 Vehicle Detector Single Channel Inductive Vehicle Loop Detector for Car Parking Lot

    Features: The Vehicle Loop Detector is mainly used to detect the existence and passing of vehicles  Selectable Pulse Time: This feature sets the length of time that the pulse relay will be energized for 1 Second or 0.5 Seconds Pulse Relay Selection: The Pulse Relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop Sensitivity Boost : This feature sets the undetected level to maximum sensitivity and is used  to prevent loss of detection of high-bed vehicles Switch Selectable Sensibility: 4 sensitivity setting are available on the switches to allow flexibility in configuration Switch Selectable Frequency: 4 frequency settings are available to prevent cross-talk between adjacent loops Filter Option: This option is used to provide a delay between detection of the vehicle and switching of the output relay . This relay is normally used to prevent false detection of small or fast moving objects Specifications: Supply voltage 220VAC Power 4.5VA Output relays 240V/5A Operating temperature -20~65°C Storage temperature -40~85°C Frequency range 20 kHz to 170 kHz Temperature compensation 50°C/ h Reaction time 10ms Signal holding time Unlimited/limited Sensitivity Higher:0.02% high:0.05% low:0.1% lower:0.5% Loop inductance Total loop plus ...

    • ASIN: B07GV5933N
    • Brand: Hilitand
    • ASIN: B07GV5933N
    • UPC: 798382336618
    • Part No: Hilitands7cg4tnqh1

  • RENO BX Single Channel, 2 Outputs, Fail Safe, 120 VAC

    All switches are accessible from the front panel. Loop Diagnostics: Front panel ôFailö LEDindicates ôreal-timeö Open Loop and Shorted Loop conditions. A third distinct flash rate indicates a loop failure has occurred and corrected. 2nd Output: Presence, Pulse-Entry, Pulse-Exit, or Fault Output.

    • ASIN: B0012N1INW
    • Brand: Reno A&E
    • ASIN: B0012N1INW
    • Part No: BX-3-120VAC