Showing 1-10 of 257 results

Browse for Lcd Interface best prices at RankeDeal.com

  • Tripp Lite SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS, 2U Rack/Tower, WEBCARDLX Network Interface, LCD, USB, 8 Outlets (SMART1500RM2UN)

    The SMART1500RM2UN SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up servers and network storage devices, the SMART1500RM2UN switches to battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss. Featuring eight NEMA 5-15R outlets (four switchable) and a 10-foot power cord with 120V NEMA 5-15P input, the SMART1500RM2UN has an internal battery that provides 13 minutes of support at half load and 4.5 minutes at full load. The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. Automatic voltage regulation (AVR) maintains 120V nominal output over an input range of 83V to 147V...

    • ASIN: B00B5HYFOE
    • Color: Black
    • Brand: Tripp Lite
    • ASIN: B00B5HYFOE
    • UPC: 971499763465
    • Part No: SMART1500RM2UN

  • SunFounder 2004 20x4 LCD Module IIC I2C Interface Adapter Blue Backlight for Raspberry Arduino UNO R3 MEGA2560 (2 Pack)

    Deacription:1.This is a high-quality I2C LCD 2004 display. It's in elegant blue with white contents displayed. Can display 4 rows with 20 characters for each.2.With IIC/I2C interface, it only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don't want the backlight, you can also unplug the jumper cap at the LCD back.With the LCD shield, you can display whatever you want by programming the Arduino board. Therefore, this is a perfect choice to make your project more interesting and vivid!Specification: Display: 4 lines x 20 characters Backlight: Blue with white character color LCD controller: HD44780 Pin Definition: VCC/ GND/SDL and SCA Contrast Adjust: Potentiometer Backlight Adjust: Jumper Default Address: 0x27, 0x3F Working Voltage: 5VPackage List 2 Pack blue 20x4 2004 lcd display + I2C serial interface

    • ASIN: B07MTFDHXZ
    • Color: 20x4 I2C LCD(2 pack)
    • Brand: SunFounder
    • ASIN: B07MTFDHXZ
    • Part No: SF-2X2004I2C

  • LCD1602 2004 20x4 LCD Display Adapter IIC//TWI/SPI/I2C Serial Interface Module Shield for Arduino UNO R3 MEGA (2 Pcs

    Features: Supply voltage: 5V Saves using up data ports on the Arduino The backlight and contrast is adjusted by potentiometer/trimmer Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable Compatible for 1602 LCD 2004 LCD.This module can drive 2 and 4 line LCD displays for Arduino With this I2C interface module, you will be able to realize data display via only 2 wires. I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself) Description: As there is limited pin on Arduino controller,your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C LCD serial interface module, you will be able to realize data display via only 2 wires. The I2C expander is address-selectable (8 values),and it provides 7 I/O ports and one switch-control port (backlight for LCDs). It attaches directly to the usual 2x and 4x LCD displays with a single controller (e.g., 4x20). The brain is a PCF8574T 8-bit I2C GPIO expander wired up for 4-bit communication with the LCD. This board is capable of reading and writing in 4-bit mode, and it also can toggle the backlight. The register layout is: D7, D6, D5, D4, BACKLIGHT (wired to V0), E (clock/enable), R/W (direction), RS (co...

    • ASIN: B07D3YPK3H
    • Color: i2c lcd
    • Brand: Ardest
    • ASIN: B07D3YPK3H
    • UPC: 647726893945
    • Part No: I2C Series Interface Module

  • Elecrow 5 inch Capacitive Touch Screen 800x480 TFT LCD Display HDMI Interface Supports Raspberry Pi 2B 3B 3B+ BB Black, Banana Pi Windows 10 8 7

    Introduction This 5 inch HDMI capacitive touch screen LCD supports various systems with resolution of 800×480. Broadly you can apply it to mini PCs (Raspberry Pi/BB Black/Banana Pi), desktop PCs and game console. When works with Raspberry Pi, supports Raspbian, Ubuntu, Kodi, WIN10 IOT, single touch, and free driver. When work as a computer monitor, supports Windows 10//8/7, 5 point touch (XP and older version system: single-point touch), free driver. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc. Product Parameters Size: 5.0 (inch) Resolution: 800 × 480 (dots) Touch: Support 5 point capacitive touch Audio output: support Dimensions: 121.11*95.24(mm) Weight: 248 (g) Package List 5 Inch Capacitive HDMI Display x1 HDMI cable x1 Micro USB Cable x1 DVDx1 Copper screws pack (4pcs) x1

    • ASIN: B07FDYXPT7
    • Color: Gold
    • Brand: ELECROW
    • ASIN: B07FDYXPT7
    • UPC: 749029248764
    • Part No: 8595698868

  • GeeekPi 5 inch HDMI Monitor LCD Resistive Touch Screen 800x480 LCD Display USB Interface for Raspberry Pi 3/2 Model B/B+ & Banana Pi (Plug and Play Free Driver)

    5 Inch 800*480 HDMI USB Plug and Play Resistive Touch Screen LCD Display for Banana Pi/PC/Raspberry Pi 2/3/B+/Android/Ubuntu/Debian/Beaglebone Black/Udoo/Compute Stick This fantastic 5 inch HDMI LCD display with USB touch screen is compatible with almost all the operating systems on the market. Utilizing pre-existing Linux/Windows/Mac drivers, this 800 x 480 touch screen will help you hit the ground running. Resistive touch function gives the user full control over any device. It supports Windows XP SP3, Windows 7, Windows 8, Windows 8.1, Windows 10, Android 4.2, Windows CE7, Ubuntu and Debian. With the built-in EDID device information, your equipment will get identified in no time. Meanwhile, its USB touch can fulfill the functions of the right mouse button and drag and drop. With the special design power circuit for this display, it requires less than 150mA current to get it running with perfect performance. We have successfully run the tests on PC, laptop, Raspberry Pi, Beaglebone Black, Udoo, Compute stick, SLR camera. Specifications: Power:5V Power via USB MicroCurrent: less than 150mADisplay Type:5 inch TFT LCDResolution: 800x480Touchscreen: USB ResistiveInterface: HDMI & USB 2.0 Full SpeedDimensions: 133mm x 76mm x 7mm Weight without package:120gWeight with package:140g P...

    • ASIN: B01L6O2NEE
    • Brand: GeeekPi
    • ASIN: B01L6O2NEE
    • UPC: 703501197568
    • Part No: Z-0053

  • WINGONEER 5PCS IIC I2C TWI SPI Serial Interface Board Module Port for Arduino LCD1602 Display

    WINGONEER trademark Reg.NO:4747611Features:This is another great IIC/I2C/TWI/SPI Serial Interface.As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after£¬connected with a certain quantity of sensors or SD card.However, with this I2C interface module, you will be able to realize data display via only 2 wires.If you already has I2C devices in your project, this LCD module actually cost no more resources at all.It is fantastic for Arduino based project.I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself)Supply voltage: 5Vthe backlight and contrast is adjusted by potentiometerCome with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cableI2C Address: 0x27 (I2C Address: 0X20~0X27 (the original address is 0X27,you can change it yourself)Compatible for 1602 LCDWeight:5gSize:5.5x2.3x1.4cmPackage Contents:5x WINGONEER IIC/I2C/TWI/SPI Serial Interface Module Port

    • ASIN: B06XHGYYWB
    • Brand: WINGONEER
    • ASIN: B06XHGYYWB
    • UPC: 723466639125
    • Part No: JT0705

  • HiLetgo 2pcs IIC I2C Serial Interface Module LCD1602 Address Changeable for Arduino 1602 LCD Display

    2pcs IIC I2C Serial Interface Board Module LCD1602 Address Changeable Arduino 1602/2004 I2C Interface 4-Wire 1602/2004 screen Arduino IIC/I2C Interface LCD1602/2004 adapter plate without LCD screen Arduino control board IO port is only 20, plus some sensor, SD card Han, relay modules and more, IO port is not enough, The original 1602/2004 screen requires 7 IO port can drive up, we have developed this module can help you save five IO ports, we send arduino library Product parameters: 1. Dimensions: 41.5mm (length) * 19mm (W) * 15.3mm (height) 2. Weight: 5g 3. PCB Color: Black 4. Supply Voltage :2.5-6V 5. Supports the I2C protocol 6. With backlight power control, can be connected via jumper settings are backlight power. Plug the jumper to connect the backlight off, unplug the jumper to disconnect the backlight power 7. Contrast can be adjusted by turning the blue potentiometer clockwise increase, counterclockwise weakened. Potentiometer design on the front, enabling customers to freely adjust anytime 8. Modules can be cascaded to cascade up to eight. By short-circuiting A0/A1/A2 modify the device address. The default address is 0x27. Note: Please contact us if you need the Schematic and Datasheet.

    • ASIN: B00VC2NEU8
    • Color: Black
    • Brand: HiLetgo
    • ASIN: B00VC2NEU8
    • UPC: 797698770260
    • Part No: 3-01-0080

  • Waveshare Raspberry Pi LCD Display Module 5inch 800480 TFT Resistive Touch Screen Panel HDMI Interface for Any Model of Rapsberry-pi A/A+/B/B+/2 B

    Features 800×480 high resolution, touch control Directly-pluggable into any revision of Raspberry Pi (only except the first generation Pi model B which requires an HDMI cable) Driver provided (works with custom Raspbian directly) HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) Back light control to lower power consumption High quality immersion gold surface plating Package Contains 5inch HDMI LCDx1 HDMI connector x 1 Touch pen x1 RPi screws pack (4pcs) x 1 DVD x 1 Why the LCD doesn't work with my Raspbian? --To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual. --However, for the first testing, you may want to use our provided image directly. Why the LCD still doesn't work with the Waveshare provided image? --Make sure the hardware connection is correct and connects fine. --Make sure the image in TF card is burnt correctly. --The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. For more info, please check the wiki page: www.waveshare.com/wiki/5inch_HDMI_LCD?amazon

    • ASIN: B00TIA0PMQ
    • Brand: Waveshare-Raspberry pi
    • ASIN: B00TIA0PMQ
    • UPC: 799632837756
    • Part No: FBA_5inch-HDMI-LCD

  • LGDehome IIC/I2C/TWI LCD 1602 16x2 Serial Interface Adapter Module Blue Backlight for Arduino UNO R3 MEGA2560( pack of 2)

    Feature: This module uses only two IO ports Blue Balcklight. Package include: 2x IIC/I2C/TWI 1602 Serial LCD module

    • ASIN: B0711WLVP9
    • Brand: LGDehome
    • ASIN: B0711WLVP9
    • UPC: 753610374374
    • Part No: 7545720818

  • 5pcs 1602LCD Display IIC/I2C/TWI/SP I Serial Interface Board Module Port For Arduino

    Description:This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project. Package included: 1pcs * 1602LCD Display IIC/I2C/TWI/SP I Serial Interface Board Module Port For Arduino

    • ASIN: B01FDD3X98
    • Brand: SenMod
    • ASIN: B01FDD3X98
    • UPC: 611138956345
    • Part No: 5746820