Showing 1-10 of 52 results

Browse for Motor Shield best prices at RankeDeal.com

  • HiLetgo L293D Motor Driver Shield Compatible to Duemilanove Mega UNO R3 AVR ATMEL

    Features: 1. to 4 bidirectional DC motors and 4 PWM speed controllers (approximately 0.5% resolution) 2. Up to 2 stepper motor forward and reverse control, single / double step control, staggered or micro-step and rotation angle control 3. 4-way H-bridge: The L293D chip provides 0.6A (peak 1.2A) current per bridge with thermal shutdown protection, 4.5Vto36V 4. The pull-down resistor ensures that the motor remains stopped at power-up 5. Large terminal blocks make wiring easier (10-22AWG) and power 6. With reset button 7. 2 large terminal external power terminals, to ensure logic and motor drive power separation 8. Download Easy to use software library for rapid project development Package Included: 1*L293D Motor Driver Shield

    • ASIN: B01DG61YRM
    • Color: Blue
    • Brand: HiLetgo
    • ASIN: B01DG61YRM
    • UPC: 702082656945
    • Part No: 3-01-0506-C

  • Arduino A000079 Motor Shield, R3, 5V to 12V

    Arduino A000079 Motor Shield, R3, 5V to 12V. Operating voltage: 5V to 12V. Motor controller: l298p. Drives 2 dc motors. Arduino A000079 Motor Shield, R3, 5V to 12V. Unit Count : Motor.

    • ASIN: B0084ZQF3O
    • Brand: Arduino
    • ASIN: B0084ZQF3O
    • UPC: 609456348324
    • Part No: A000079

  • Adafruit Motor/Stepper/Servo Shield for Arduino v2.3 Kit

    We have upgraded the shield kit to make the bestest, easiest way to drive DC and Stepper motors. This shield will make quick work of your next robotics project! We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements: Lots of other little improvements such as a polarity protection FET on the power pins and a bit of prototyping area. And the shield is assembled and tested here at Adafruit so all you have to do is solder on straight or stacking headers and the terminal blocks. Lets check out these specs again: 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter! 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. Motors automatically disabled on power-up Big terminal block connectors to easily hook up wires (18-26AWG) and power Arduino reset button brought up top Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor suppl...

    • ASIN: B00PUTH3B0
    • Brand: Adafruit
    • ASIN: B00PUTH3B0
    • UPC: 702658303396
    • Part No: 1438

  • Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit

    This shield will make quick work of your next robotics project! We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements: Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well. Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project. Lets check out these specs again: 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter! 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. Motors automatically disabled on power-up Big terminal ...

    • ASIN: B00JI99DX4
    • Brand: Adafruit
    • ASIN: B00JI99DX4
    • UPC: 700253565133
    • Part No: 7545720969

  • Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

    Specification: Chip: L298N Logic voltage: 5V Logic current 0mA-36mA Storage Temperature: -20 ℃ to ℃ to +135 Operating mode: H-bridge driver (dual) Drive voltage: 5V-35V Drive current: 2A (MAX single bridge) Maximum power: 25W Dimensions: 43x43x27mm Package include: 1x L298N Module Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN4 control OUT3 OUT4

    • ASIN: B014KMHSW6
    • Color: Original Version
    • Brand: Qunqi
    • ASIN: B014KMHSW6
    • UPC: 783325944715
    • Part No: MK-050

  • Kuman L293D Motor Drive Shield Expansion Board for Arduino Duemilanove Mega UNO R3 AVR ATMEL KY58

    Features : 2 interface for 5V Servo connected to the Arduino"s high-resolution dedicated timer - no jitter. Can drive 4 DC motors or 2 stepper motors or 2 Servo. Up to 4 bi-directional DC motors with individual 8-bit speed selection. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping. 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 25V DC. Pull down resistors keep motors disabled during power-up. 2 external terminal power interface, for separate logic/motor supplies. Compatible for Arduino Mega, Diecimila and Duemilanove Specifications: Type:Module Module Function:Board Operating Voltage : 5V~12V Current Sensing : 1.65V/A Max current : 2A per channel or 4A max (with external power supply) You will get: 1* L293D Motor Drive Shield, friendly customer service

    • ASIN: B01FVJQWAQ
    • Color: L293D Motor Drive
    • Brand: Kuman
    • ASIN: B01FVJQWAQ
    • Part No: KY58-MOTOR-UK

  • Cytron 10A Bi-directional DC Motor Driver Shield for Arduino, 7v-30v, peak 15A

    This controller is able to regulate the speed of one DC motor with Arduino. Cytron 10A Motor Driver Shield (Arduino)"SHIELD-MD10" is a compatible Arduino motor shield for controlling high current brushed DC motor up to 10A continuously. It should be stacked on to an Arduino main controller board such as Arduino UNO R3. Features: Shield for Arduino Speed controller to control one motor. Bi-directional control for 1 brushed DC motor. Support motor voltage ranges from 7V to 30V (Rev2.0). Maximum current up to 10A continuous and 15A peak (10 seconds). 3.3V and 5V logic level input. Solid state components provide faster response time and eliminate the wear and tear of mechanical relay. Fully NMOS H-Bridge for better efficiency and no heat sink is required. Speed control PWM frequency up to 10KHz. Stackable I/O header pin. Selectable digital pins for PWM and DIR. Made In Malaysia. Provide tutorial and sample code.

    • ASIN: B01M3WQWRK
    • Color: Blue
    • Brand: Cytron
    • ASIN: B01M3WQWRK
    • Part No: 36010906

  • kuman CNC Shield Expansion Board V3.0 +UNO R3 Board + A4988 Stepper Motor Driver with Heatsink for Arduino Kits K75 (CNC Shield+UNO R3+Stepper Motor)

    CNC Shield Board: Latest Arduino CNC Shield Version 3. 0 GRBL 0. 9 compatible 4-Axis support (X, Y, Z , A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Coolant enable Compatible with A4988 or DRV8825 stepper driver Runs on 12-36V DC Arduino UNO R3 Board: MCU: ATmega328 USB interface: ATmega16U2 Operating voltage: 5V Digital I/O pins: 14 (including 6 with PWM capability) Analog input pins: 6 I-I/O pin output current: 40mA max 3. 3V output current: 150mA max Flash memory: 32 kB (0. 5kB used by bootloader - included) Static RAM (SRAM): 2 kB EEPROM: 1 kB Clock speed: 16MHz A4988 Stepper Motor Driver: A4988 Stepper Motor Driver Board is a breakout board for Allegro's A4988 DMOS Micro stepping Driver with Translator and Overcurrent Protection; Low RDS (On) Output Automatic current decay mode detection / selection Mix with slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3. 3 and 5 V compatible logic supply Thermal shutdown circuitry Ground fault protection Load short-circuit protection Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16 Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy ...

    • ASIN: B06XHKSVTG
    • Color: CNC Shield+UNO R3+Stepper Motor
    • Brand: kuman
    • ASIN: B06XHKSVTG
    • Part No: K75-CNC-UK

  • LM YN Motor Stepper Servo Robot Shield v2 with PWM Driver Shield For Arduino

    100% Brand new and high quality! 2 connections for 5V servos connected to the high-resolution dedicated timer - no jitter! 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. Motors automatically disabled on power-up. Big terminal block connectors to easily hook up wires (18-26AWG) and power. Reset button brought up top. Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies. Specifications: Size: 68mm * 52mm * 20mm(L*W*H). Color: Blue. Net Weight: 25g. Package includes: 1*Motor Stepper Servo Robot Shield v2 with PWM Driver Shield

    • ASIN: B01NBI8L0U
    • Brand: LM YN
    • ASIN: B01NBI8L0U
    • UPC: 603983633540

  • WINGONEER L298P Motor Driver Module H-bridge Drive Shield Expansion Board High-Power DC Stepper Motor Controller For Arduino

    WINGONEER trademark Reg.NO:4747611Technical Specifications:1 logical part of the input voltage VD: 5V2driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input3 logical part of the work current Iss:

    • ASIN: B06XHD657M
    • Brand: WINGONEER
    • ASIN: B06XHD657M
    • UPC: 723466639996
    • Part No: JT0792