Showing 1-10 of 695 results

Browse for Nitro Star best prices at RankeDeal.com

  • HPI Racing 107824 Nitro Star G3.0 HO Engine with Pullstart

    This is the HPI Nitro Star G3.0 High Output Engine with Pull Starter. The HPI G3.0 HO engine is the high output (HO) version of the well-known HPI G3.0 engine (#101310). The new high output version is optimsed for performance and durability without compromising on run time. A finned black-coated crankcase design not only adds strength and rigidity but will also help cool the engine. HPI's WR8 Rally car (#106950) comes preinstalled with the G3.0 HO engine. Specification for G3.0 HO: Capacity :2.95cc Bore: 16.8mm Stroke 13.6mm RPM : 30000 Practical RPM: 6500~32000 Power : 2.2 ps/kw Carburettor: Composite Slide,7mm Bore Includes: G3.0 High Output Engine with Pull Starter, Carburetor, R5 Cold Glow Plug, Foam Air Filter, three Zip Ties and Instructions Requirements: Fuel: Car blend with 20-25% nitro content Track Equipment: Glow starter, fuel tubing, glow plug wrench

    • ASIN: B008ETGJZO
    • Brand: HPI Racing
    • ASIN: B008ETGJZO
    • Part No: H107824

  • HRP New Nitro Star F4.6 V2 Engine With Pullstart

    FEATURES: Fits any HPI Savage or other 1/8 scale monster truck 1.3oz (37g) lighter and 0.47 (12mm) shorter than previous version Larger fins on cylinder head for improved cooling New pull starter uses one-way bearing encased in a large 14mm hex for increased durability Composite body slide valve F1 7.5mm carburetor 8 ports, 7 intake, one exhaust Two year limited warranty begining at date of purchase, Valid only on engines sold and used in the USA, Canada, and South America INCLUDES: F4.6 V2 Monster Truck Engine with Pull Starter, Cold R5 Glow Plug, Air Filter, and Instructions REQUIRES: Glow Fuel: 15-25% car blend, 20% required for break-in Air filter oil Glow starter and track equipment SPECS: Displacement: 4.6cc Bore: 18.68mm Stroke: 16.6mm Power: 2.9hp @ 32,000RPM Distance between Mounting Hole Centers/Same Side: 083 (21mm) Distance between Mounting Hole Centers/Opposite Side: 1.46 (37.2mm) Crankcase Width below Mounting Tabs: 1.25 (32mm) Width at Mounting Tabs: 1.8 (46mm) Height/bottom of Mounting Tab/top of Cylinder Head: 3.5 (88mm) Height/bottom of Crankcase/top of Cylinder Head: 4 (102mm) Length/Pull Starter to Front Bearing: 3.3 (84mm) Length/Pull Starter to end of Crankshaft: 4.5 (114mm) Carburetor Settings: High Speed Needle, 2-2/2 turns clockwise from flush Idle Screw:...

    • ASIN: B00FAQZG4E
    • Brand: HPI Racing
    • ASIN: B00FAQZG4E
    • Part No: H111595

  • Hobby Products International 15105 Nitro Star G3.0 Engine with Pullstart

    This is the HPI Nitro Star G3.0 Pull Start Engine. Using the latest technology and construction techniques, this amazingly fast, durable and easy to adjust engine will give you the power you need to pulverize the competition! The Nitro Star G3.0 is the standard power plant for the Firestorm 10T stadium truck, Nitro RS4 3 Drift and Nitro MT2 G3.0 vehicles. Specifications:Glow Plug: R5 (use HPI1504) Displacement: 3.01cc Bore: 16.8mm Stroke: 13.6mm Maximum Horse Power: 2.2PS(2.17hp)/ 31,000rpm Maximum RPM: 32,000rpm Head Gasket: x3 0.2mm Carburetor: F2 Composite 6.5mm NOTE:To fit this engine in a standard MT2 you will need the optional HPI86000 engine mount.

    • ASIN: B000M0UAM6
    • Brand: Hobby Products International
    • ASIN: B000M0UAM6
    • Part No: 15105

  • HPI 1/10 Bullet MT ST Nitro Star G3.0 SLIDE CARBURETOR & AIR FILTER Carb

    HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)Nitro Star G3.0 Slide Valve Carburetor & Air FilterMSRP: $90.99This Product Includes:Slide Valve Carburetor (Part # 101277)Carburetor Body (No Part #)Idle Adjustment Screw (Part # 101276)Throttle Slide Drum (Part # 101272)Mid-Range Needle Valve with O-Rings (Part # 101275)Fuel Line Fitting (Part # 1473)Throttle Boot and O-Rings (Part # 101266)Main Needle (Part # 1471)Main Needle Valve Holder (Part # 1470)Fuel Line Fitting (Part # 1473)Water Resistant Air Filter Set (Part # 101831)Air Filter Foam Element (Part # 101652 Partial)Two (2) Nylon Tie Straps (Part # 100329 Partia This product is NEW in OEM Packaging and is from a New, Unused HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)Part Numbers are for Reference Only. The parts included with this product are exclusive to what is pictured in this listing.This product is compatible with the following Model: HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)

    • ASIN: B00NT5OLX0
    • Brand: HPI Racing
    • ASIN: B00NT5OLX0
    • UPC: 015568419638
    • Part No: DHZBulletCarburetor

  • HPI 1/10 Bullet MT ST Nitro Star G3.0 CRANKCASE, CRANKSHAFT, BEARINGS & MOUNTS

    HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)Nitro Star G3.0 Crankase, Crankshaft, Bearings & Engine MountsMSRP: $96.99This Product Includes:Nitro Star G3.0 Crankcase with installed Bearings (Part # 15145)Front Bearing 7x19x6mm (Part # 101586)Rear Bearing 12x21x5mm (Part # 112843)Carburetor Lock Pin (Part # 151131)Nitro Star G3.0 Crankshaft (Part # 15146)Starter Pin and Spring (Part # 1433)Engine Mounts (Part # 101203)Metal ConstructionFour (4) Cap Head Screws Four (4) Spring Washers (Part # Z800 Partial)This product is NEW in OEM Packaging and is from a New, Unused HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)Part Numbers are for Reference Only. The parts included with this product are exclusive to what is pictured in this listing.This product is compatible with the following Model: HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)

    • ASIN: B00NT5OQ9Y
    • Brand: HPI Racing
    • ASIN: B00NT5OQ9Y
    • UPC: 015568419683
    • Part No: DHZBulletCrankcase

  • HPI Racing 87132 Roto Start 2 System Nitro Star 12/15/18

    This is the HPI Roto Start 2 Electric Shaft Drive Starter System for the HPI Nitro Star .12/.15/.18 size engines with a pull starter.

    • ASIN: B000FAN13I
    • Brand: HPI Racing
    • ASIN: B000FAN13I
    • Part No: 87132

  • HPI Racing 111600 Nitro Star F3.5 V2 w/Pullstart

    FEATURES: ABC construction, Aluminum piston with Brass liner that is Chrome plated Slide valve 2-needle carburetor with composite body that reduces heat transfer and helps prevent vaporization of fuel Race legal .21 cu in (3.5cc) displacement 22g lighter and 4mm taller than previous version Two stage air filter with splash cover Pull starter with one-way bearing encased in a 14mm hex for increased durability Two year limited warranty beginning at date of purchase INCLUDES: Nitro Star F3.5 V2 Engine with Pull Starter, R5 Glow Plug, Air Filter and Instructions REQUIRES: Glow Fuel: Car blend with 20-25% nitro content, use 20% for break- in Air filter oil SPECS: Displacement: .21 cu in (3.5cc) Carburetor Settings: High Speed Needle, 2-2/2 turns clockwise from flush Idle Screw: Set throttle trim on transmitter so that throttle is in neutral position, turn screw counter-clockwise to reduce idle speed, or clockwise to increase idle speed. Set idle speed high enough to keep engine running smoothly, but not high enough to engage the clutch. Low Speed Needle: No adjustment recommended. For increased performance, set after high-speed needle is adjusted. Turn needle in 1/8 turn increments for better bottom end throttle response. Caution-never turn in more than 2 turns from flush. This will c...

    • ASIN: B00FAR3COY
    • Brand: HPI Racing
    • ASIN: B00FAR3COY
    • Part No: H111600

  • HPI H15105-Nitro Star G3.0Engine Pull Starter Multi-Coloured by HPI

    High quality components;Original accessory;Precise workmanship

    • ASIN: B01L4H0XXG
    • Brand: HPI Racing
    • ASIN: B01L4H0XXG
    • UPC: 767485500103
    • Part No: 500103

  • Power Rangers Ninja Steel Ninja Power Star Nitro Zord Pack

    Power up your Power Rangers Ninja Steel battle gear or launch into action with the Power Rangers Ninja Steel Ninja Power Star Pack! Launch and throw the Ninja Stars, or connect them with battle gear to activate unique sounds! Each star activates features in other Ninja Steel items, including the DX Morpher and DX Battle Gear, each sold separately. Collect them all to find your power!.

    • ASIN: B01KZDMB9Y
    • Color: Multicolor
    • Brand: Power Rangers
    • ASIN: B01KZDMB9Y
    • UPC: 045557437602
    • Part No: 43760

  • HPI 1/10 Bullet MT ST Nitro Star G3.0 * FLYWHEEL, CLUTCH BELL, SHOES & BEARINGS

    HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)Nitro Star G3.0 Flywheel, Clutch Bell, Shoes, Springs & BearingsMSRP: $50.99This Product Includes:Two (2) 5x10mm Bearings (Part # B021)13 Tooth Clutch Bell (Part # 101037)Steel ConstructionClutch Shoes (Part # 101047)Clutch Spring (Part # 101048)Flywheel (Part # 101251)Two (2) Pin DesignMetal ConstructionClutch Nut (Part # 101062)Brass Collet (Part # 1420)Six (6) 5x10.5 Washers (Part # Z694 Partial)One (1) 3x6mm Cap Head Screw (Part # Z541 Partial)One (1) 3x8mm Washer (Part # Z224 Partial)This product is NEW in OEM Packaging and is from a New, Unused HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)Part Numbers are for Reference Only. The parts included with this product are exclusive to what is pictured in this listing.This product is compatible with the following Model: HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)

    • ASIN: B00NT5OLLC
    • Brand: HPI Racing
    • ASIN: B00NT5OLLC
    • UPC: 015568419669
    • Part No: DHZBulletClutchFly

  • 15133 One-Way Starter Bearing Nitro Star T-15

    • ASIN:
    • Model: HPI15133
    • Color: MulticolorMulti