Specification: Rated Voltage: DC 12V Rated Power: 60W Maximum Flow: 5L/min Maximum Pressure: 0.8MPA Pump Diameter: Approx. 4.8cm / 1.89inch Length: Approx. 14.5cm / 5.7inch Cable Length: Approx. 30cm / 11.8inch Clips Length: Approx. 8cm / 3.15inch Outlet PVC pipe Length:150cm Nylon pipe Length:100cm Brass pipe Length:70cm Package include: 1x Oil Pump 1x 11mm Outlet PVC pipe 1x 6mm Nylon pipe 1x 5mm Brass pipeHow to use: 1.Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil 2.Then connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal3.Next,open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move; then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely); as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again4.After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets cleanIf you have not used it for a long time...
- ASIN: B01KZIFZVK
- Brand: CISNO
- ASIN: B01KZIFZVKPart No: FBA_CP195AC