Showing 1-10 of 226 results

Browse for Parker Needle Valves best prices at RankeDeal.com

  • Parker Hannifin NV104C-4-2 Series NV104C Brass Angle Needle Valve, 1/4" Compression Tube x 1/8" Male Thread

    Parker's all Brass needle valves have a metal-to-metal seats and are for use in applications in which the desired flow must be maintained with little to no variance.

    • ASIN: B01BYLXPQE
    • Brand: Parker Hannifin
    • ASIN: B01BYLXPQE
    • Part No: NV104C-4-2

  • Parker 003381101 338 Series Brass Needle Valve, 1/4" NPTF, 250 psi

    338 Series needle valves bi-directionally meter the flow of air through the valve. This series features a fine tapered needle providing precise flow of air in both directions. Numerical micrometer position markings are stamped on the perimeter of the adjustment knob which provide a visual indication of the setting. Once the desired flow is selected, a set screw can be tightened to maintain the setting. Stainless steel / brass internal components, nitrile seals. 2.28" Open height and 2.03" Closed height. 28 scfm at 100 PSIG inlet pressure with full pressure drop.

    • ASIN: B003Q6CASK
    • Brand: Parker
    • ASIN: B003Q6CASK
    • Part No: 003381101

  • Parker V Series Stainless Steel 316 Needle Valve, Inline, Hand Wheel, PCTFE Tipped Stem, 1/4" NPT Female

    This Parker V series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, PCTFE-tipped stem, integral bonnet, and female National Pipe Taper (NPT) threads on both ends. It connects two male threaded pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 5,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The PCTFE (polychlorotrifluoroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off and coarse regulation of both liquids and gases. The nylon 6/6 hand wheel, used to raise and lower the stem tip into and out of the flow, is strong yet lightweight and is resistant to corrosion from most chemicals and solvents. PTFE (polytetrafluoroethylene) packing, which resists chemicals, moisture, and high temperatures and is located above the power threads, is suitable for use with most liquids and gases. This valve ships with a black nylon 6/6 hand wheel with white, blue, green, red, and yellow opt...

    • ASIN: B005ZMDWKI
    • Brand: Parker
    • ASIN: B005ZMDWKI
    • Part No: 4F-V6LK-SS

  • Parker 316 Stainless Steel Inline Process Needle Valve with PTFE Stem Seal, 1/4" NPT Male Inlet/Outlet Port, 5000 psi

    Parker V Series Needle Valves are designed for positive leak tight shut-off and regulation of fluids in process, power, and instrumentation applications. With a wide variety of port sizes and styles, temperature capabilities ranging from -65 degree F to 450 degree F (-54 degree C to 232 degree C) and pressures to 5000 psig (345 bar), V Series Needle Valves provide the user with the utmost in flexibility when designing miniaturized tubing or piping systems. Inline configuration. Flow rate Cv is 0.43. 1/4" Inlet size. MNPT inlet connection. 1/4" Outlet size. MNPT outlet connection. Regulating stem type. PTFE (polytetrafluoroethylene) stem seal. Stainless steel trim. Stainless steel body material. Manual operated. 0.176" Orifice. 100 Percent factory tested.

    • ASIN: B004M18U50
    • Brand: Parker
    • ASIN: B004M18U50
    • Part No: 4M-V4LN-SS

  • Parker Hannifin NV109P-4 Series NV109 Brass Needle Valve, 1/4" Female Pipe x 1/4" Male Pipe

    Parker's all brass needle valves have a metal-to-metal seats and are for use in applications in which the desired flow must be maintained with little to no variance.

    • ASIN: B008FMRSEQ
    • Brand: Parker Hannifin
    • ASIN: B008FMRSEQ
    • Part No: NV109P-4

  • Parker Brass Inline Process Needle Valve with PTFE Stem Seal, 1/4" NPT Male Inlet/Outlet Port, 3000 psi

    Parker V Series Needle Valves are designed for positive leak tight shut-off and regulation of fluids in process, power, and instrumentation applications. With a wide variety of port sizes and styles, temperature capabilities ranging from -65 degree F to 450 degree F (-54 degree C to 232 degree C) and pressure 5000 psig (345 bar), V Series Needle Valves provide the user with the utmost in flexibility when designing miniaturized tubing or piping systems. Inline configuration. Flow rate Cv is 0.43. 1/4" Inlet size. Double ferrule compression inlet connection. 1/4" Outlet size. Double ferrule compression outlet connection. Regulating stem type. PTFE (polytetrafluoroethylene) stem seal. Stainless steel trim. Stainless steel body material. Manual operated. 0.176" Orifice. 100 Percent factory tested.

    • ASIN: B004M18U0K
    • Brand: Parker
    • ASIN: B004M18U0K
    • Part No: 4M-V4LN-B

  • Parker 003381103 338 Series Brass Needle Valve, 1/2" NPTF, 250 psi

    338 Series needle valves bi-directionally meter the flow of air through the valve. This series features a fine tapered needle providing precise flow of air in both directions. Numerical micrometer position markings are stamped on the perimeter of the adjustment knob which provide a visual indication of the setting. Once the desired flow is selected, a set screw can be tightened to maintain the setting. Stainless steel / brass internal components, nitrile seals. 3.62" Open height and 3.22" Closed height. 126 scfm at 100 PSIG inlet pressure with full pressure drop.

    • ASIN: B003Q6CATO
    • Brand: Parker
    • ASIN: B003Q6CATO
    • Part No: 003381103

  • Parker N800S Needle Valve, Steel, 1/2-14, 15 GPM

    Price for: each item: needle Valve max. Pressure (psi): 5000 flow range (GPM): 15 Type: steel port (in.): 1/2-14 Length (in.): 2.62 height (in.): 2.70 country of origin (subject to change): unknown.

    • ASIN: B000LDNKQM
    • Brand: Parker
    • ASIN: B000LDNKQM
    • Part No: N800S

  • Parker V Series Stainless Steel 316 Needle Valve, Inline, Hand Wheel, PCTFE Tipped Stem, 1/4" A-Lok Compression Fitting

    This Parker V series inline needle valve has a 316 stainless steel body, nylon 6/6 hand wheel, PCTFE-tipped stem, integral bonnet, and double ferrule compression fittings on both ends for leak-resistant seals. It connects two pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +350 degrees F (-54 to +177 degrees C) at up to 5,000 pounds per square inch gauge (psig) CWP (cold working pressure). The integral bonnet is forged as a part of the valve body and provides strength. The PCTFE (polychlorotrifluoroethylene) tipped 316 stainless steel stem conforms to ASTM International (ASTM) A276 standards for stainless steel bars and shapes and provides tight shut-off and coarse regulation of both liquids and gases. The nylon 6/6 hand wheel, used to raise and lower the stem tip into and out of the flow, is strong yet lightweight and is resistant to corrosion from most chemicals and solvents. PTFE (polytetrafluoroethylene) packing, which resists chemicals, moisture, and high temperatures and is located above the power threads, is suitable for use with most liquids and gases. This valve ships with a black nylon 6/6 hand wheel with white, blue, green, red, and yell...

    • ASIN: B005ZMDSPM
    • Brand: Parker
    • ASIN: B005ZMDSPM
    • Part No: 4A-V4LK-SS

  • Parker U Series Stainless Steel 316 High Temperature Needle Valve, Inline, T-Bar Handle, Blunt Stem, 1/2" NPT Female

    This Parker U series inline needle valve has a 316 stainless steel body, stainless steel T-bar handle, blunt stem, union bonnet, and female National Pipe Taper (NPT) threads on both ends to connect two male threaded pipes going in the same direction. The 316 stainless steel body provides higher strength and more corrosion resistance than stainless steel. Operating temperatures range from -65 to +1,200 degrees F (-54 to +649 degrees C) at up to 6,000 pounds per square inch gauge (psig) CWP (cold working pressure). The union bonnet provides tight seals and has low distortion from repeated removal and replacement of the bonnet. The non-rotating blunt B type stem has an upper stem of 630 stainless steel that conforms to ASTM International (ASTM) A564 standards for stainless steel bars and a lower stem of 316 stainless steel that conforms to ASTM A276 standards for stainless steel bars and shapes. The stem provides on and off control of liquids. The stainless steel T-bar handle resists scaling and corrosion. Flexible graphite stem packing, which resists high heat and is inert in most chemicals, is located below the power threads to separate the threads and the thread lubricant from the flow. This valve is used for process, instrumentation, and power applications in a variety of indust...

    • ASIN: B005ZMJQFS
    • Brand: Parker
    • ASIN: B005ZMJQFS
    • Part No: 8F-U12LB-G-SS

  • JMF Brass Needle Valve

    • ASIN:
    • Model: 11010TR46
    • Color: GoldBrass, Copper

  • JMF 4506572 Brass Needle Valve Lead Free, 1/4"MIP x 1/4"MIP

    • ASIN:
    • Model: 13005H75PB
    • Color: GoldBrass, Copper