Showing 1-10 of 887 results

Browse for Seachem Laboratories Reef Buffer best prices at RankeDeal.com

  • Seachem Reef Buffer 1 Kilo

    Reef Builder™ and Reef Buffer™ may be used together. Use Reef Builder™ to raise carbonate alkalinity without affecting pH. Use Reef Buffer™ to raise carbonate alkalinity and pH. Unlike the competition, Reef Builder™ contains calcium, magnesium, and strontium to compensate for the inevitable loss which occurs when raising alkalinity. It also contains sufficient magnesium to restore magnesium routinely depleted.

    • ASIN: B0002DGMFM
    • Brand: Seachem
    • ASIN: B0002DGMFM
    • UPC: 000116067706
    • Part No: 116067706

  • Seachem Reef Buffer, 500 grams

    Reef Buffer is specifically designed to meet the needs and requirements of the closed reef environment. The principal difference between Reef Buffer and Marine Buffer is that the pK of Reef Buffer is slightly higher than that of Marine Buffer. The pK of a buffering agent is equivalent to the pH around which that buffer most strongly buffers. One would presume, then, that the pK of a saltwater buffer should be 8.3; however, the multitude of organic acids produced by the inhabitants of a reef system forces pH downward to a much greater degree than in a non-reef, marine system. A buffer with a pK of 8.3 would end up yielding a pH more in the range of 8.0-8.2. Reef Buffer's higher pK (8.6) allows for greater pH stability in a reef system where the bioload is significantly more than in a fish only system.

    • ASIN: B0002DGM8E
    • Brand: Seachem
    • ASIN: B0002DGM8E
    • UPC: 000116067300
    • Part No: 67106730

  • Seachem Reef Buffer 250gram

    Reef Buffer will also raise carbonate alkalinity; however, it is intended primarily for use as a buffer in a reef system where the maintenance of a pH of 8.3 is often difficult. When pH is not an issue, Reef Builder or Reef Carbonate should be your first choice for a carbonate alkalinity supplement. Reef Buffer is specifically designed to meet the needs and requirements of the closed reef environment. The principal difference between Reef Buffer and Marine Buffer is that the pK of Reef Buffer is slightly higher than that of Marine Buffer. The pK of a buffering agent is equivalent to the pH around which that buffer most strongly buffers. One would presume, then, that the pK of a saltwater buffer should be 8.3; however, the multitude of organic acids produced by the inhabitants of a reef system forces pH downward to a much greater degree than in a non-reef, marine system. A buffer with a pK of 8.3 would end up yielding a pH more in the range of 8.0-8.2. Reef Buffer's higher pK (8.6) allows for greater pH stability in a reef system where the bio load is significantly more than in a fish only system.

    • ASIN: B0002DGMF2
    • Brand: Seachem
    • ASIN: B0002DGMF2
    • UPC: 000116067607
    • Part No: 67106760

  • Reef Buffer, 4 kg / 8.8 lbs

    Reef Buffer is intended primarily for use in a reef system where the maintenance of a pH of 8.3 is often difficult. When used as directed Reef Buffer will raise the pH of your reef system to 8.3 without fear of accidentally overshooting the pH to a dangerous level. Reef Buffer will also raise carbonate alkalinity. Reef Buffer is a blended product and is not just sodium carbonate. Reef Builder should be used to raise alkalinity when pH is not a problem. Use Seachem's MultiTest: Marine pH & Alkalinity to check pH and total alkalinity.

    • ASIN: B0002DGMG6
    • Brand: Seachem
    • ASIN: B0002DGMG6
    • UPC: 000116067904
    • Part No: 679

  • Seachem Reef Builder 300gram

    Reef builder raises carbonate alkalinity without immediately impacting on pH. With long term use there will be a tendency to stabilize at pH 8.3. Carbonates and calcium are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. Used as directed, reef builder will not deplete calcium, magnesium, or strontium which usually tend to precipitate with increasing alkalinity. Reef builder and reef buffer may be used together. Use reef builder to raise carbonate alkalinity without affecting pH. Use reef buffer to raise carbonate alkalinity and pH.

    • ASIN: B00025K0PS
    • Brand: Seachem
    • ASIN: B00025K0PS
    • UPC: 000116036603
    • Part No: 67103660

  • Seachem Reef Carbonate 500ml

    Seachem Reef Carbonate 500ml

    • ASIN: B0002DGM5C
    • Brand: Seachem
    • ASIN: B0002DGM5C
    • UPC: 000116066303
    • Part No: 116066303

  • Seachem Marine Buffer 1 Kilo

    Marine Buffer will Safely raise marine pH to 8.3. It will not raise pH above 8.3 even if inadvertently overdosed. Marine Buffer is a blended product and is not just sodium bicarbonate or sodium carbonate, commonly sold as a substitute. Such products can raise pH to dangerous levels if not used properly. Marine Buffer contains sodium, magnesium, calcium, strontium, and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate.

    • ASIN: B000255PDA
    • Brand: Seachem
    • ASIN: B000255PDA
    • UPC: 000116034708
    • Part No: 67103470

  • Reef Fusion, 2 4 L / 1 fl. gal.

    Reef Fusion 1 and reef Fusion 2 are the foundation of a system formulated to provide the essentials for the reef aquarium. Reef Fusion 1 provides calcium, while reef Fusion 2 provides alkalinity. When used together, the reef Fusion system will maintain calcium and alkalinity levels. Reef Fusion 1 provides not only 100, 000 mg/L of ionic calcium, but also includes Biologically Appropriate levels of magnesium, strontium, boron, iron, manganese, and molybdenum. Reef Fusion 2 contains a mixture of carbonates and bicarbonates at an alkalinity of 4400 meq/L. It is designed to restore and maintain alkalinity in the reef aquarium and provide calcareous species with the essential carbonate needed for growth. When used as directed, reef Fusion 1 and reef Fusion 2 will maintain the critical levels of calcium and alkalinity necessary for healthy coral growth, while providing Biologically Appropriate levels of other elements and trace minerals.

    • ASIN: B003I5QSY6
    • Brand: Seachem
    • ASIN: B003I5QSY6
    • UPC: 000116121903
    • Part No: 1219

  • Seachem AquaVitro Eight.Four 11.8oz

    Maintains pH of 8.3 - 8.5, Raises marine pH while adjusting alkalinity, Concentrated

    • ASIN: B0018CG6KW
    • Brand: Seachem
    • ASIN: B0018CG6KW
    • UPC: 015568977558
    • Part No: 67175010

  • Reef Builder, 600 g / 1.3 lbs

    Reef Builder raises carbonate alkalinity without immediately impacting on ph. With long term use there will be a tendency to stabilize at pH 8.3. Carbonates and calcium are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. Used as directed, Reef Builder will not deplete calcium, magnesium, or strontium which usually tend to precipitate with increasing alkalinity. Reef Builder and Reef Buffer may be used together. Use Reef Builder to raise carbonate alkalinity without affecting ph. Use Reef Buffer to raise carbonate alkalinity and ph.

    • ASIN: B00025K1ES
    • Brand: Seachem
    • ASIN: B00025K1ES
    • UPC: 000116036306
    • Part No: 67103630