Showing 1-10 of 346 results

Browse for Sr20 Turbo Engine best prices at RankeDeal.com

  • GT25 GT28 T25 T28 GT2871 GT2860 Turbo Fit for Nissan SR20 SR20DET 180sx, 0.64A/R 400BHP+ 5-Bolt Flange Turbocharger Water & Oil Cooled 1.8L-3.0L Engine &Gaskets

    GT28 GT2871 A/R 0.6/0.64 5 Bolts Anti-Surge Universal Performance Turbo T25 Flange -Water&oil cooling system. -360 degree thrust bearing system. -Journal bearing sysytem. -Fit Vehicle: Universal turbo for performance use, racing car etc. -Fit engine displacement 1.8-3.0L.  Specification: Compressor wheel: 53.1mm/71mm Compressor Housing: 0.6 A/R Anti-Surge, 3" Inlet, 2.0" Outlet Turbine wheel: 53.85mm/47.15mm Turbine housing: T25 Inlet, 5 Bolts outlet, A/R 0.64

    • ASIN: B07SJBYPNQ
    • Brand: HENYEE
    • ASIN: B07SJBYPNQ
    • UPC: 782123002917
    • Part No: TC-GT2871-T037

  • For Nissan 240SX SR20 Enigne Swap 15pcs T04E Turbo T3 Manifold Upgrade Installation Kit

    More horsepower gives that crucial edge in racing to win. But what is the most efficient method to improve the horsepower of your project car? The easist answer is a TURBO. As the old saying goes, if you wish to succeed, then you must have the right tools. In this case, this means that you need to have the right weapon for your project car if you wish to leave the competition behind. A turbo charger kit gives the most consistant bang for your buck for street and track car applications. While there is no replacement for displacement, turbocharging your car comes pretty close. It'll increase the amount of air your engine will flow thus making more power. A T04E turbocharger is a great turbo for any street application. Capable of easily producing 350+BHP its a great addition if you're trying to extract more power from your ride and maintain easy streetability.Turbocharger Spec:Capable of Boosting Horse Power up to 350+ BHPExhaust (Turbo Manifold) Flange: Standard T3/ T4 4-BoltExhaust (Downpipe) Flange: Standard T3 5-BoltInlet: 3"Outlet: 2"Compressor:Trim: 55A/R: 0.5Inducer/ Exducer (mm): 50.50 / 76.00Turbine:Trim: 73A/R: 0.63Inducer/ Exducer (mm): 65.50 / 55.90Package Included:1 x T04E Turbocharger1 x Stainless Steel Manifold1 x 31"x12"x3.25" Front Mount Intercooler1 x set of 3" Int...

    • ASIN: B01CQ93UNQ
    • Brand: Auto Dynasty
    • ASIN: B01CQ93UNQ
    • Part No: AD-TBK-KOS-SL-63+TM-SR20DETST3-15

  • JDM NISSAN WATER PUMP - S14 SILVIA SR20DET RWD ENGINE - 240SX SR20 TURBO

    Fits ALL SR20DET S14 series engines S14 SR20DET RWD engines Silvia, 240SX / 180SX

    • ASIN: B00876ORRG
    • Brand: Infiniti
    • ASIN: B00876ORRG
    • Part No: 21010-S14

  • maXpeedingrods GT25 GT28 T25 T28 GT2871 GT2860 Universal 0.64A/R Turbo Turbocharger 400BHP+, T25 5-Bolt Flange 0.6A/R Turbo Charger for 1.8L-3.0L Engine, Water + Oil Cooled Turbo

    This GT2871 Turbo is capable of generating 400-600 HP, depending on application and with the correct tuning. The GT2871 is generally used for the displacement engines of 1.8L and up. This is the Universal Application Turbo, Professional Installation is highly recommended; some modification may be required for individual vehicle. Specifications Compressor Size: * Inlet(Air Intake): 3"(77.5mm) * Outlet: 2"(51.2mm) * Trim: 48 * Inducer Diameter: 49.20mm * Exducer Diameter: 71mm, * A/R: 0.6 Turbine Size: * Exhaust (Turbo Manifold) Flange: T25 4-Bolt Flange * Exhaust (Downpipe) Flange: 5-Bolt Flange * Trim: 76 * Inducer Diameter: 53.8mm * Exducer Diameter: 71mm * A/R: 0.64 Cooling Type: Water + Oil Oil Restrictor: Yes Oil Thread Size: W12*1.25 Water Thread Size: W8*1.25 Dimensions(length width Height):220*210*210mm Horse Power: Boost Horse Power up to 400BHP Bearing Type: Journal Bearing Accessories: Gasket included as picture shown Application Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). Perfect for all 1.8L-3.0L engine NOTE: * Professional installation is highly recommended (No Instruction Included) * for any needs please contact us

    • ASIN: B013DYFGAS
    • Brand: maXpeedingrods
    • ASIN: B013DYFGAS
    • Part No: GT28

  • Turbo Manifold Fits 1988-1998 Nissan 240SX | S13 S14 SR20 SR20Det Swap JDM Exhaust by IKON MOTORSPORTS | 1989 1990 1991 1992 1993 1994 1995 1996 1997

    FIT FOR:89-98 Nissan 240SX S13/ S14 SilviaFor (ALL Models Above with a Swapped 2.0L 4Cyl DOHC SR20DET Engine ONLY)IMPORTANT NOTE: ITEM WILL ONLY FIT OEM BODY STYLE UNLESS OTHER SPECIFIED.INSTRUCTION NOT INCLUDED.PROFESSIONAL INSTALLATION HIGHLY RECOMMENDED.TEST FITTING IS REQUIRED TO ENSURE FITMENT.

    • ASIN: B00R5SXNMM
    • Color: Unpainted
    • Brand: IKON MOTORSPORTS
    • ASIN: B00R5SXNMM
    • UPC: 848524033940
    • Part No: TM-NS13-SR

  • Turbo M8x1.25 40mm Stud Nut Kit For Nissan Garrett T25 T28 RB26 SR20 CA18 Turbocharger

    • ASIN: B07PR9Y7VL
    • Brand: CHENLEE TURBO
    • ASIN: B07PR9Y7VL
    • Part No: CL290007

  • For Nissan S13 SR20 Swapped Top Feed Fuel Injector Rail Kit+Fuel Pressure Regulator (Red)

    Fuel Pressure Regulator:Most modern fuel injected vehicles run a fuel pump in the tank and run much more fuel than it is needed to the fuel rail. A regulator keeps a certain amount of fuel pressure in the rail and then sends the rest back to the tank. However, tuners upgrade the air intake system as well as the exhaust system and often neglect that more fuel is needed to make those mods perform at their full potential. This Fuel Pressure Regulator is adjustable so you can tune the fuel pressure to your needs.Fuel Rail:A High Flow Aluminum Fuel Rails able to provide more fuel to your engines once its has been tuned to a higher horsepower range, making a noticeable improvement in fuel flow.Package Included: Fuel rail kit Fuel pressure regulatorCompatible with:89-94 Nissan 240SX Silvia S13Any Vehicle with SR20-DET Motor and Top Feed Intake Manifold Swapped, Fits Turbocharged Models with SR20-DET Motors ONLY

    • ASIN: B015QILDI8
    • Color: Red
    • Brand: Auto Dynasty
    • ASIN: B015QILDI8
    • Part No: AD-FPR-SSS-RD+FRK-SR20DET-RD

  • Rev9Power S13 S14 S15 Silvia Sr20 Sr20det T3/t4 T3t4 Top Mount Turbo Kit 350hp & Up

    DESCRIPTION: 89-94 95-98 240sx s13 s14 s15 sr20 turbo charger set up this comes with the following items -sr20 top mount cast t3 flange turbo manifold manifold -sr20 3" stainless turbo flex downpipe -t3t4 .57ar turbo charger (good for 350+ hp) -Godspeed 38mm waste gate (set at 7psi)(comes with extra 11psi, 15 psi springs) -Oil line kit , oil feed , oil return (with all fittings ) -this is a basic set up, this set up require an intercooler , and intercooler pipe and blow off valve to make it complete TURBO SPEC: T3T4 turbo charger .57ar ( polished compressor housing) Intake: 3 inch Inlet: 2 inch Compressor trim: .50 Compressor Wheel diameter: 50.16 / 76.84 Turbine Wheel diameter: 54.06 / 65.20 Exhaust Trim: .57ar Turbine flange type : T3 flange Down pipe flange type: 5 bolt standard Cooling type: oil cool only Horsepower rating: 350+ ALL ITEMS ARE BRAND NEW 1 YEAR WARRANTY IF ITEM IS INSTALLED BY ASE CERTIFIED MECHANIC

    • ASIN: B004TU3TW8
    • Color: Unpainted
    • Brand: Rev9Power
    • ASIN: B004TU3TW8
    • Part No: TCK-015

  • For Nissan 240SX SR20 Enigne Swap 9pcs T04E Turbo T3 Manifold Upgrade Installation Kit

    More horsepower gives that crucial edge in racing to win. But what is the most efficient method to improve the horsepower of your project car? The easist answer is a TURBO. As the old saying goes, if you wish to succeed, then you must have the right tools. In this case, this means that you need to have the right weapon for your project car if you wish to leave the competition behind. A turbo charger kit gives the most consistant bang for your buck for street and track car applications. While there is no replacement for displacement, turbocharging your car comes pretty close. It'll increase the amount of air your engine will flow thus making more power. A T04E turbocharger is a great turbo for any street application. Capable of easily producing 350+BHP its a great addition if you're trying to extract more power from your ride and maintain easy streetability.Turbocharger Spec:Capable of Boosting Horse Power up to 350+ BHPExhaust (Turbo Manifold) Flange: Standard T3/ T4 4-BoltExhaust (Downpipe) Flange: Standard T3 5-BoltInlet: 3"Outlet: 2"Compressor:Trim: 55A/R: 0.5Inducer/ Exducer (mm): 50.50 / 76.00Turbine:Trim: 73A/R: 0.63Inducer/ Exducer (mm): 65.50 / 55.90Package Included:1 x T04E Turbocharger1 x Stainless Steel Manifold1 x 38mm Wastegate1 x 38mm Dump Pipe1 x SQV Blow off Valve...

    • ASIN: B01CQ93XCE
    • Brand: Auto Dynasty
    • ASIN: B01CQ93XCE
    • Part No: AD-TBK-KOS-SL-63+TM-SR20DETST3-9

  • For Nissan 240SX GT2871 GT28 Internal WG Dual Ball Bearing Turbocharger+Heat-Wrap Blanket Black S13 S14 Silvia SR20 CA18

    The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.Package Included:1 x Turbocharger1 x Turbo Blanket2 x Stainless Steel Lacing Wire FastenersAll necessary isntallation hardware includedCompatible with:89-98 Nissan 240SX S13/S14 SilviaFits CA18/SR20 CA18DET/SR20DET Engine SWAP

    • ASIN: B00QRWHVCU
    • Color: Black
    • Brand: Auto Dynasty
    • ASIN: B00QRWHVCU
    • Part No: AD-TBC-GT2871-DBB+TBBK-T25-BK-RS