Showing 1-10 of 658 results

Browse for Tenon Jig best prices at RankeDeal.com

  • Grizzly H7583 - Tenoning Jig

    This fully adjustable Tenoning Jig fits left- and right-tilting table saws with 3/8"H x 3/4"W "T" shaped miter slot, while handling stock up to 3-1/4" thick. It has an adjustable guide bar to control sliding friction/precision in the miter slot and two large handles for to help ensure smooth control. The bevel angle is adjustable from 90° to 75° and the backstop is adjustable from 90° to 45°. The multi-position control levers and extra-large clamping handwheel also ensure accurate and repeatable results. Additional assembly required for left-tilting saws.

    • ASIN: B07MPLGKKG
    • Brand: Grizzly
    • ASIN: B07MPLGKKG
    • UPC: 690550175831
    • Part No: H7583

  • General Tools 870 Aluminum Mortise and Tenon Jig Kit

    The General Tools 870 E-Z Pro Mortice & Tennon Jig is ready to use right out of the box to produce 1/4" mortise and tenon joints for cabinets, furniture and frames. Included are bushings for also producing 3/8" and 1/2" joints with other size optional spiral up cut bits(not included). Using A plunge router with the jig, woodworkers of all skill levels can cut fully aligned mortises and tenons ranging from 1/4" to 1/2" wide and from 1” to 3" long. The jig can be mounted directly on a workbench or onto a board that can be clamped in a vise or to a bench. GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER AND BE MORE PRODUCTIVE WITH GENERAL TOOLS

    • ASIN: B00563TL2Y
    • Brand: General Tools
    • ASIN: B00563TL2Y
    • UPC: 031112509600
    • Part No: 870

  • Shop Fox W1500 Right Angle Jig

    Crafted from high density aircraft aluminum, the Shop Fox Right Angle Jig offers a huge advantage when cutting finger joints, tenons, glue joints and much more. Features a powerful adjusting toggle clamp for holding projects in place, as well as a locking table that adjusts for multiple cuts and dadoing. The Shop Fox Right Angle Jig can be used in combination with a wide variety of clamping devises, so you can secure projects at nearly any cutting angle. Engineered to fit in standard 3/8" x 3/4" miter slots, it offers up to 1-1/2" horizontal and nearly unlimited vertical holding capacity.

    • ASIN: B000022423
    • Brand: Shop Fox
    • ASIN: B000022423
    • UPC: 638361862359
    • Part No: W1500

  • WoodRiver Deluxe Tenoning Jig

    • ASIN: B07B8VBTP9
    • Brand: WOODRIVER
    • ASIN: B07B8VBTP9
    • UPC: 844788055285
    • Part No: 2801

  • Heavy-Duty Tenoning Jig

    Safety, accuracy and repeatability are the hallmarks of this heavy-duty tenoning jig. Designed to fit any table saw with a 3/4" x 3/8" miter groove, this jig will hold your stock in precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is controlled with a fine-threaded adjustment knob. Constructed of cast iron and steel.

    • ASIN: B001DT393W
    • ASIN: B001DT393W
    • UPC: 733175298407
    • Part No: TA2801

  • Trend MT/JIG Mortise and Tenon Jig

    Quick, accurate and versatile jig allows you to cut perfect-fitting mortise and tenons with a plunge router - requires only one setup to cut both pieces.Ideal for cabinet, chair and table construction.Technical Details:Fully adjustable for compound angle joints.With reversible template to produce round and square end tenons.For 1/2"-2" thick material; maximum width 4".Angle bar and main plate can be rotated from -10° to 45°.Template can also be used for accurate doweling applications.Includes all mounting hardware; four F-style clamps; mortise and tenon jig setup bar with guide bush and cutter selection chart; plus seven guide bushings to create mortise and tenons 1/4"- 5/8" thick.For use with 1/4" shank straight router bits.

    • ASIN: B001MXA25M
    • Brand: TREND
    • ASIN: B001MXA25M
    • Part No: MT/JIG

  • INCRA I-BOX Jig for Box Joints

    To get right to the point, the new INCRA I-Box is the most advanced tool ever produced for creating a stunning variety box joints & finger joints. Its revolutionary design allows faster setup, greater versatility, and improved user safety compared to traditional jigs. At the same time, it's easy to use and the included 1-hour instructional DVD covers everything from basic setup to advanced decorative joinery. The I-Box is an evolutionary leap forward from conventional box joint methods - this single jig can be used on both your table saw and your router table, and the IBox's dual pitch lead screw mechanics easily micro-adjust joint tightness and provide a whopping 1/8-Inch - 3/4-Inch range of pin widths. It's capable of making good fitting box joints using any width cutter within that range into lumber from 1/4-Inch to 1-Inch thick. The advantages continue far beyond the basics: I-Box-exclusive joints like the Center Keyed Box Joint can be used to produce symmetric patterns rather than ending your joint with a partial pin as often required with other traditional box joint jigs. The Splined Box Joint is yet another INCRA-only decorative joint that's guaranteed to add wow-factor to your projects, and the I-Box can even be used to produce an unlimited variety of classic dentil mould...

    • ASIN: B008LD4S5G
    • Brand: INCRA
    • ASIN: B008LD4S5G
    • UPC: 735090335694
    • Part No: IBOX

  • Bosch Deluxe Router Edge Guide With Dust Extraction Hood & Vacuum Hose Adapter RA1054

    The Bosch RA1054 Deluxe Router Guide greatly expands the versatility of Bosch routers. It makes it possible to do edge-forming using non-piloted bits, and guides cuts along the workpiece edge or up to 8 inches from the edge. Standard equipment includes dust extraction hood and vacuum hose adapter that allows connection to 1-1/4-inch, 1-1/2-inch and 35mm hoses.

    • ASIN: B00005RHPP
    • Color: Black
    • Brand: Bosch
    • ASIN: B00005RHPP
    • UPC: 000346313208
    • Part No: RA1054

  • Festool 574432 Domino Joiner DF 500 Q Set

    Combination set includes: Domino DF 500-Plus Joiner, DOMINO cutter D 5mm, Support Bracket, Operating Tool, Trim Stop, Cross Stop, Plug-It Power Cord, and T-LOC Systainer #2 storage container. You can make flawless mortises every single time, thanks to Festool's new Domino joining system! Joining no longer has to be a slow, difficult process. The Domino Joiner, with its revolutionary cutting method, utilizes a patented mortising technique, simple indexing features, and adjustable mortise sizing to make flawless mortises. Powerful 420 watt motor drives the cutter spindle at 23,400 RPM. Precise positioning and accurate mortising with the viewing window. Use 1 of 3 mortise width adjustments for perfectly fitting joints and fast assembly; easy to adjust while the jointer is operating. Cut long mortises in an instant thanks to the simultaneous turning and oscillating movement without kickback. 11/16" dust port extracts up to 95% of chips generated when used in conjunction with any one of Festool's vacuum systems. Retractable stop pins for quick and precise positioning of the initial domino tenon on both work pieces. Five catch positions at 0, 22.5, 45, 67.5, and 90 degrees, as well as infinitely variable mortising angles from 0 to 90 degrees. Simple, precise mortising fence height adju...

    • ASIN: B004SETSXE
    • Color: Black heavy duty long fiber plastic and metal
    • Brand: Festool
    • ASIN: B004SETSXE
    • UPC: 624416826018
    • Part No: 574432

  • DELTA 34-184 Universal-Deluxe Tenoning Jig

    When you need perfect, tight joints, the DELTA 34-184 Universal-Deluxe Tenoning Jig will give you professional results every time. The DELTA 34-184 is designed to work with any table saw with a 3/8-inch by 3/4-inch miter slot, standard on almost all table saws. It is made of durable, CNC precision milled cast iron, and can be used with both right and left tilt saws. The jig can be adjusted from 45 to 90 degrees with adjustable positive stops, and there's a micro-fine adjustment knob for fine width-of-cut settings down to 4/1000-inch. By pushing a button, you can make for macro adjustments. Unlike most jigs that require tools to make adjustments, the DELTA 34-184 features a large thumbscrew that allows for tool-less adjustments. With two ergonomic handles, you'll be able to make smooth cuts every time easily and comfortably. The jig handles up to 3-1/4-inch thick stock and features a quick-release hold down clamp for efficient work. The jig measures 11.8 x 12 x 8.2 inches and weighs 21.3 pounds.

    • ASIN: B00006S7C7
    • Brand: Delta
    • ASIN: B00006S7C7
    • UPC: 847962001337
    • Part No: 34-184

  • Kreg R3 Jig R3 Pocket Hole System

    • ASIN:
    • Model: R3
    • Color: MulticolorMulti
    • Size: Kreg r3 Pocket Hole Jig3

  • Kreg K4 Jig K4 Pocket-Hole Jig

    • ASIN:
    • Model: K4
    • Color: Multicolor
    • Size: EA

  • Kreg K5MS Jig K5 Master System

    • ASIN:
    • Model: K5MS
    • Color: MulticolorMulti
    • Size: EA

  • Kreg K5 Jig K5 Pocket-Hole Jig

    • ASIN:
    • Model: K5
    • Color: Multicolor
    • Size: EA