Showing 1-10 of 1000 results

Browse for Thermostat Controller best prices at RankeDeal.com

  • Inkbird ITC-308 Heater Cooler Device Temperature Controller Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1200W

    Specification: Temperature Control Range: -50~99°C / -58~210°F Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F) Temperature Control Mode :On/Off Control, Heating and Cooling Input Power: 100 ~240VAC, 50Hz/60Hz Temperature Control Output: Max. 10A, 100V~240V AC Buzzer Alarm: High and Low Temperature Alarm Sensor Type: NTC sensor (Including) Sensor Length: 2m / 6.56ft Input Power Cable Length: 1.5m (5ft) Output Power Cable Length: 30cm (1ft) Body Dimension: 140x68x33mm (5.5x2.7x1.3inch) Socket Dimension: 85x42x24mm (3.3x1.7x1inch) Ambient Temperature: -30~75°C / -22~167°F Storage Temperature: -20~60°C / -4~140°F Humidity: 20~85% (No Condensate) Warranty: 1 Year Package Included: 1x ITC-308 Temperature Controller 1x Manual

    • ASIN: B01HXM5UAC
    • Color: green
    • Brand: Inkbird
    • ASIN: B01HXM5UAC
    • UPC: 705701565505
    • Part No: ITC-308-11

  • Century Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing, 40-108°F

    The Century Digital Heat Mat Thermostat Controller allows gardeners to select and maintain optimum; Rooting temperatures for faster seeding or cutting growth. It is compatible with many other heat mats. It works great for controlling plant or pet heat mat temperature. Programming: 1. To display in celsius, Please Press and Hold "DOWN" button for 3 seconds. Press and Hold "UP" button for 3 seconds to display temperature in Fahrenheit. 2. To adjust the temperature setting, Press and Hold "SET" button for 3 seconds to enter the temperature selection mode. Press the " UP" or "DOWN" button to adjust the temperature that you want to set. Then Press "SET" button again. So the setting temperature is done. Press "SET" button to display the preset temperature. When the unit is plugged into an electrical outlet, the "POWER" LED becomes lit, the heat on only when the "HEATING" LED is lighted. When the preset temperature is reached, the "HEATING" LED will turn off and there is no power to the heat mat. ATTENTION: If the thermostat remains "ON" ( delivering power to the heat mat) for more than 5 consecutive hours, it indicates the desired temperature is not being reached. To achieve higher temperature the Mat may need to be placed on a more insulated surface. Covering the seedling tray with a ...

    • ASIN: B01I15S6OM
    • Color: Black
    • Brand: Century
    • ASIN: B01I15S6OM
    • UPC: 680474115723
    • Part No: FBA_BNQ-T7H

  • WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version

    The WH1436 temperature controller can turn on/off an electric appliances at desired temperature. For example, you can use the controller to turn on a heater at 99. 9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45. 3 F. (Please be noted that the controller itself doesn't change temp. You need to use heater or refrigeration equipment with it. ) Main features: Plug and play. No worry about wiring. Maximum load: 1100 watts @110 volts Heating OR refrigeration working mode. Celsius or Fahrenheit read-out. Temperature calibration. Compressor delay protection time setting. High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature) Auto shut off timer(It doesn't turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0. ) Specification: 1. Power supply: AC 110V 50/60Hz 2. Measure range: -58 ~ 230 F(-50 ~ 110 C) 3. Temperature resolution: 0. 1 4. Accuracy: 0. 5 5. Working mode: Heating OR Cooling mode 6. Slew range of temp controlling: 0. 1 - 230(difference between turn-on degree and turn-off degree) 7. Control resolution: 0. 1 8. Power consumption: less than 3W 9. Relay contact capacity: 10A 10. Store s...

    • ASIN: B00V4TJR00
    • Color: White
    • Brand: WILLHI
    • ASIN: B00V4TJR00
    • UPC: 711463669641
    • Part No: WH1436

  • iPower 40-108 Degrees Fahrenheit Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing, 1-Pack, Black

    " The iPower heat mat thermostat provides constant customized temp seed germination, reptiles and brewing. It is ideal for maintain rooting temperature in a tray and dome. Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures. This heat mat controller is compatible with all heat mats, but is optimized for iPower seedling heat mats. Features: 1.Controls temperature in colder or warmer environments 2.Digital temperature controller for heat mat 3.Provides constant optimum temperature for specific crops 4.Digital thermostat provides temperature control between 40°F-108°F (5-42°C), temperature display range: 32 -140°F 5.Celsius or Fahrenheit read-out 6.Specs: 120 Volts / 8 Max Amps / 60 HZ / 1000 Watts 7.Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug 8.CETL certification is proof that a product complies with widely-accepted safety standards 9.1 Year Manufacturer Warranty Seeding Heat Mat Setup Instructions: Place sensor into the rooting area about 1""- 1-1/2"" Position thermostat up and away from seedling trays and stray water. Do not submerge Plug heat mat into thermostat Plug in thermostat power cord and set maximum desired temperature Hea...

    • ASIN: B01E9IO6N0
    • Color: Black
    • Brand: iPower
    • ASIN: B01E9IO6N0
    • UPC: 799441253914
    • Part No: GLHTMTCONTROL

  • bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A

    Please unplug devices from the controller when not in use. When the power comes back on after a power failure the unit will act as if it has been turned on again and will power the ouputs. To disable power, unplug the device. Do not rely solely on the power button. The BTC201 temperature controller can turn on/off an electric appliances at desired temp. For example, you can use the controller to turn on/off a heater and a fridge to keep temp around 100 F. Turn on heater at 98.5 F. Turn on fridge at 105 F. Turn off the heater/fridge when temp reaches 100 F. The setting is (SV=100, Cd=5, Hd=1.5). the controller itself doesn't change temp. Main features: 1-YEAR Warranty Plug and play. Maximum load: 1100W @110V. On/Off Control, Heating and Cooling Celsius or fahrenheit read-out. Temperature calibration. Compressor delay protection time setting. High and low temperature alarms are available(You can use this feature to alarm you when the temperature overshoots your desired temperature) Specification: 1.Power supply: AC 110V - 240V 50/60Hz 2.Measure range: -58°F ~ 230°F / -50°C ~ 110°C 3.Temperature resolution: 0.1 4.Accuracy: ±0.5 5.Working mode: Heating and Cooling mode 6.Max span between turn-on degree and turn-off degree is 25 7.Control resolution: 0.1 8.Power con...

    • ASIN: B01KEYDNKK
    • Brand: bayite
    • ASIN: B01KEYDNKK
    • UPC: 711463671453
    • Part No: BTC201

  • Century BNQ-T7B(C) Digital Cooling Temp Controller for Cooling Device 40-10, 3.15 x 1.69 x 4.70, Black

    The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices' output temperature, which ranges from 40 to 108 °F (5 - 42°C). Depending on the user's preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.

    • ASIN: B01LZV591B
    • Color: Black
    • Brand: Century
    • ASIN: B01LZV591B
    • UPC: 726179400372
    • Part No: T7B(C)

  • Hydrofarm MTPRTC Controller Thermostat for Heat Mats Germination, Reptiles and Brewing Jump Start Digital, 9-by-19-1/2-Inch, Black Plastic

    "Hydrofarm's Jump Start Heat Mat Thermostat controls the temperature of heat mats by providing constant optimum temperature for plants, seedlings and cuttings. It is ideal for maintaing root zone/rooting temperatures in a tray and dome. Easy plug-in operation with LED indicator light, digital temperature selection, and three-prong ground plug. Controllable range from 68 to 108 degrees Fahrenheit. Includes temperature probe with 6' cord. Choice of Fahrenheit or Celsius digital readout. Heat mats are not just for gardening anymore! They are very useful for providing consistent, controllable heating for other hobbies including reptile and arachnid keeping (heating for enclosures and terrariums), homebrewing (maintaining of fermentation temperatures), and more. With this thermostat, you can easily expand any heat mat's functionality so that it provides the precise level of warmth your pets and projects require to flourish. The ability to dial in and maintain your preferred temperature means you can rest assured and no longer need to constantly monitor temperature, whether in colder or warmer environments. The Heat Mat Thermostat is the only ETL-certified heat mat thermostat on the market. ETL (Intertek) is a respected inspection laboratory which specializes in product safety testing....

    • ASIN: B000NZZG3S
    • Color: Black Plastic
    • Brand: Hydrofarm
    • ASIN: B000NZZG3S
    • UPC: 043978299922
    • Part No: JEN-2043

  • VIVOSUN Digital Heat Mat Thermostat Temperature Controller 68-108 ºF for Seedlings, Germination, Rooting, Fermentation and Reptiles

    Notes on recommended applications: When the controller is connected to a heat mat, the mat will keep heating until whatever the sensor probe is touching reaches the target temperature. So make sure your heat mat, like VIVOSUN's heat mats, have internal controls to keep the temperature within a safe range while heating.

    • ASIN: B015F4VFGI
    • Color: Thermostat Controller
    • Brand: VIVOSUN
    • ASIN: B015F4VFGI
    • UPC: 742920469641
    • Part No: 330101

  • Zoo Med ReptiTemp RT-600 Digital Thermostat Controller

    The Zoo Med Reptitemp Digital Thermostat allows you to maintain precise control of your terrarium temperature with an easy-to-program LCD interface. Just plug in your heating device (up to 600 watts) or cooling device (up to 150 watts), set the desired temperature and mode, and let the Reptitemp handle the rest! 1 year manufacturer warranty

    • ASIN: B07FYXX9L3
    • Color: n/a
    • Brand: Zoo Med
    • ASIN: B07FYXX9L3
    • UPC: 097612376005
    • Part No: RT-600

  • Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000

    Inkbird All-Purpose Digital Temperature Controller Fahrenheit & Centigrade Thermostat w Sensor Cooling/Heating Specification: Output: 2 Relays Temperature Measuring Range: -50~210°F / -50~99°C Resolution: 0.1°F / 0.1°C Accuracy: ±1°F (-50~160°F) / ±1 °C (-50~70°C) Power Supply: 110VAC 50Hz/60Hz Power Consumption: 3W Sensor: NTC Sensor Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC) Ambient Temperature: 0~60°C Storage Temperature: -30~75°C Relative Humidity: 20~85% (No Condensate) Front Panel Size: 75(L)*34.5(W)mm Mounting Size: 71(L)*29(W)mm Product Size: 75(L)*34.5(W)*85(D)mm Sensor Length: 2m (include the probe)Package Included: 1x ITC-1000 Temperature Controller 110v with 6.67 NTC Sensor FAQ: Q1: How to wire? I can hear the relay inside the unit click, but I can't get any voltage on the cool or heat terminals. A1: IMPORTENCE: Please don't forget to wire the Heating and Cooling device to Power supplier and make a circuit. Q2: The cooling device doesn't work, even though the temperature reaches TS+DS, and the Cool indicator lamp is flashing. A2: The cooling has delay function. If you want to run immediately and don't need the PT function, you can set PT=0.

    • ASIN: B00OXPE8U6
    • Brand: Inkbird
    • ASIN: B00OXPE8U6
    • UPC: 709803350489
    • Part No: ITC-1000 110V