Showing 1-10 of 129 results

Browse for Undrilled Bolt best prices at RankeDeal.com

  • AN174-7A UNDRILLED BOLT

    AN174-7A Undrilled Bolt

    • ASIN: B01I5PBBPE
    • Brand: AN174-7A
    • ASIN: B01I5PBBPE
    • UPC: 792745127141
    • Part No: 04-00915

  • Pegasus AN8-75A, 1/2-20 x 6.938 Grip Airframe Bolt, 7.72 UHL, undrilled

    AN8 bolts have a 1/2-20 thread with a 1/2" shank diameter. All AN8 bolts have a 0.680 inch thread length regardless of bolt length. This thread length is designed specifically to allow the use of a full-height nut plus one AN960-816 flat washer. Sold individually; nuts and washers sold separately. Grip Length refers to the length of the unthreaded portion of the shank. Grip lengths are available in 1/8" increments to match the thickness of the materials being bolted together (the threaded portion should never be positioned inside the hole). If your assembly is between sizes, select the next longer bolt and use additional AN960-816 and AN960-816L washers to take up the slack. A or no A? AN bolts were originally designed to be used with a castle nut and cotter pin, so the base part number indicates a drilled shank. The addition of an "A" at the end (for example, AN8-13A) indicates an undrilled shank for use with a self-locking nut. UHL: Under Head Length (also known as Full Shank Length or Overall Length not including bolt head) AN bolt nomenclature can be confusing. Please take a look at our page on Identifying AN Bolt Sizes.

    • ASIN: B01D5B9W68
    • Brand: Pegasus Auto Racing Supplies
    • ASIN: B01D5B9W68
    • UPC: 889311740948
    • Part No: AN8-75A

  • Pegasus AN10-22A, 5/8-18 x 1.438 Grip Airframe Bolt, 2.39 UHL, undrilled

    AN10 bolts have a 5/8-18 thread with a 5/8" shank diameter. All AN10 bolts have a 0.955 thread length regardless of grip length. This thread length has been calculated to be sufficient for a full-height nut plus one AN960-1016 washer. Sold individually, nuts and washers sold separately. Torque AN10 bolts to 92-108 lb-ft with AN365 or AN310 full-height nuts, or 50-65 lb-ft with AN364 or MS21042 half-height nuts. UHL: Under Head Length (also known as Full Shank Length or Overall Length not including bolt head) AN bolt nomenclature can be confusing. Please take a look at our page on Identifying AN Bolt Sizes.

    • ASIN: B07RQX1NP9
    • Brand: Pegasus Auto Racing Supplies
    • ASIN: B07RQX1NP9
    • UPC: 889311429171
    • Part No: AN10-22A

  • 10-16mm Mixed Color Undrilled Sea Beach Glass Beads Bulk DIY Jewelry Pendant Decor

    Specification:Material: GlassColor: MixedSize: 1cm - 1.6cm/0.39 - 0.63(appr.)Features:1. Made of glass material, no dyed and healthy.2. Used in candle holders and decorative bow ls or can be scented and used as potpourri.3. Perfect vase filler, add color and beauty to floral designs.4. Makes a great home decor or gift embellishment.5. They also can be used for terrariums or aquariums.Package Included:20Pcs Sea Glass

    • ASIN: B07TXB56NG
    • Brand: KORTORMOR
    • ASIN: B07TXB56NG
    • UPC: 680548385434

  • Pegasus AN3-73A, 10-32 x 7.000 Grip Airframe Bolt, 7.41 UHL, undrilled

    AN3 bolts have a 10-32 thread with a 3/16" shank diameter. All sizes of AN3 bolts have a 0.406 inch thread length, regardless of grip length. This thread length has been carefully calculated to accommodate a full-height nut plus one AN960-10 washer. Sold individually, nuts and washers sold separately. Grip Length refers to the length of the unthreaded portion of the shank. Grip lengths are available in 1/8" increments to match the thickness of the materials being bolted together (the threaded portion should never be positioned inside the hole). If your assembly is between sizes, select the next longer bolt and use additional AN960-10 and AN960-10L washers to take up the slack. A or no A? AN bolts were originally designed to be used with a castle nut and cotter pin, so the base part number indicates a drilled shank. The addition of an "A" at the end (for example, AN3-13A) indicates an undrilled shank for use with a self-locking nut. UHL: Under Head Length (also known as Full Shank Length or Overall Length not including bolt head) AN bolt nomenclature can be confusing. Please take a look at our page on Identifying AN Bolt Sizes.

    • ASIN: B013XNRBG6
    • Brand: Pegasus Auto Racing Supplies
    • ASIN: B013XNRBG6
    • UPC: 889311572686
    • Part No: AN3-73A

  • Zimar 3-1/4" x 2-3/4" Plate Zinc Anode

    A-20 Zimar Bolt On Undrilled Plate Zinc Anode Length: 3-1/4 in. Width: 2-3/4 in. Thickness: 1/2 in. Weight: 1.1 lbs Model: A-20  The A-20 Zimar Bolt On Undrilled Plate Zinc Anode is hand poured using special high grade 99.995% zinc ignots, which ensures a higher quality zinc anode. Save big on the best A-20 Bolt On Undrilled Plate Zinc Anode available. All Zimar Zinc Anodes are made in the U.S.A, and meet all standards set forth by Mil-Spec A-18001K, Mil-Spec A-18001A, and Mil-Spec A-18001.

    • ASIN: B00E9M3XUO
    • Brand: Zimar Zincs
    • ASIN: B00E9M3XUO
    • UPC: 616316649729
    • Part No: A20

  • Pegasus AN3-74A, 10-32 x 7.125 Grip Airframe Bolt, 7.53 UHL, undrilled

    AN3 bolts have a 10-32 thread with a 3/16" shank diameter. All sizes of AN3 bolts have a 0.406 inch thread length, regardless of grip length. This thread length has been carefully calculated to accommodate a full-height nut plus one AN960-10 washer. Sold individually, nuts and washers sold separately. Grip Length refers to the length of the unthreaded portion of the shank. Grip lengths are available in 1/8" increments to match the thickness of the materials being bolted together (the threaded portion should never be positioned inside the hole). If your assembly is between sizes, select the next longer bolt and use additional AN960-10 and AN960-10L washers to take up the slack. A or no A? AN bolts were originally designed to be used with a castle nut and cotter pin, so the base part number indicates a drilled shank. The addition of an "A" at the end (for example, AN3-13A) indicates an undrilled shank for use with a self-locking nut. UHL: Under Head Length (also known as Full Shank Length or Overall Length not including bolt head) AN bolt nomenclature can be confusing. Please take a look at our page on Identifying AN Bolt Sizes.

    • ASIN: B013XNRD4G
    • Brand: Pegasus Auto Racing Supplies
    • ASIN: B013XNRD4G
    • UPC: 889311572693
    • Part No: AN3-74A

  • Pegasus AN5-55A, 5/16-24 x 5.188 Grip Airframe Bolt, 5.72 UHL, undrilled

    AN5 bolts have 5/16-24 UNF threads and a 5/16" diameter shank. All sizes of AN5 bolts have a 0.531 inch thread length, regardless of grip length. This thread length has been designed specifically to accommodate a full-height nut and one AN960-516 washer. Sold individually; nuts and washers sold separately. Grip Length refers to the length of the unthreaded portion of the shank. Grip lengths are available in 1/8" increments to match the thickness of the materials being bolted together (the threaded portion should never be positioned inside the hole). If your assembly is between sizes, select the next longer bolt and use additional AN960-516 and AN960-516L washers to take up the slack. A or no A? AN bolts were originally designed to be used with a castle nut and cotter pin, so the base part number indicates a drilled shank. The addition of an "A" at the end (for example, AN5-13A) indicates an undrilled shank for use with a self-locking nut. UHL: Under Head Length (also known as Full Shank Length or Overall Length not including bolt head) AN bolt nomenclature can be confusing. Please take a look at our page on Identifying AN Bolt Sizes.

    • ASIN: B013XNM4TU
    • Brand: Pegasus Auto Racing Supplies
    • ASIN: B013XNM4TU
    • UPC: 889311456092
    • Part No: AN5-55A

  • Pegasus AN3-76A, 10-32 x 7.375 Grip Airframe Bolt, 7.78 UHL, undrilled

    AN3 bolts have a 10-32 thread with a 3/16" shank diameter. All sizes of AN3 bolts have a 0.406 inch thread length, regardless of grip length. This thread length has been carefully calculated to accommodate a full-height nut plus one AN960-10 washer. Sold individually, nuts and washers sold separately. Grip Length refers to the length of the unthreaded portion of the shank. Grip lengths are available in 1/8" increments to match the thickness of the materials being bolted together (the threaded portion should never be positioned inside the hole). If your assembly is between sizes, select the next longer bolt and use additional AN960-10 and AN960-10L washers to take up the slack. A or no A? AN bolts were originally designed to be used with a castle nut and cotter pin, so the base part number indicates a drilled shank. The addition of an "A" at the end (for example, AN3-13A) indicates an undrilled shank for use with a self-locking nut. UHL: Under Head Length (also known as Full Shank Length or Overall Length not including bolt head) AN bolt nomenclature can be confusing. Please take a look at our page on Identifying AN Bolt Sizes.

    • ASIN: B013XNRG52
    • Brand: Pegasus Auto Racing Supplies
    • ASIN: B013XNRG52
    • UPC: 889311572716
    • Part No: AN3-76A

  • KREG Molded Router Table Insert Plate Blank, for All Routers

    This Kreg Table Insert Plate Blank for Routers is made from compression molded phenolic material so it won't sag even under the weight of a heavy router. Designed to use Level-Loc Reducing Rings that install in seconds and lock in place flush every time. They make setup changes simple by allowing you to quickly swap inserts rings for different bit sizes. A blank version comes without predrilled router-mounting holes, and features alignment marks on the underside that make it easy to center and mount any router.

    • ASIN: B01M5B613B
    • Brand: Kreg
    • ASIN: B01M5B613B
    • UPC: 647096806897
    • Part No: PRS4038

  • Unique Bargains M6 Hex Socket Cap Screw Bolt and Barrel Nuts (5-pack)

    • ASIN:
    • Model: a16110800ux0724
    • Color: BronzeBronze Tone
    • Size: M6x70mm,5 Sets