Showing 1-10 of 113 results

Browse for Vertical Condensation Drain Pipe best prices at RankeDeal.com

  • Z-Flex Z-Vent 3" Vertical Condensation Drainpipe (2SVEVDP03)

    Z-Flex Z-Vent 3" Vertical Condensation Drainpipe (2SVEVDP03). This part is used as a condensation drain point for all vertical venting installations. This vertical drainpipe is installed inline with a vertical venting installation and will remove rain water and condensation that may come straight down the exhaust system. Z-Flex Z-Vent stainless steel vent pipe is ideal for the Bosch Therm 940ES / Bosch Therm 830ES / Bosch Therm 660EF / Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch Evolution 500 tankless water heaters as well as the legacy Bosch Pro 715ES / Bosch Pro 635ES / Bosch AquaStar 2400E / Bosch AquaStar 250SX heaters. Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.

    • ASIN: B0145NCG9U
    • Brand: Z-Vent
    • ASIN: B0145NCG9U
    • UPC: 663053029703
    • Part No: 2SVEVDP03

  • Noritz DT5-V Drip tee vertical condensation drain for 5" Stainless Steel vent pipe

    5" vertical drip tee for use with NORITZ Category III stainless steel vent pipe

    • ASIN: B008ORC8SS
    • Color: Iron
    • Brand: Noritz
    • ASIN: B008ORC8SS
    • UPC: 817000010270
    • Part No: DT5-V

  • Z-Flex Z-Vent 4" Vertical Condensation Drainpipe (2SVEVDP04)

    Z-Flex Z-Vent 4" Vertical Condensation Drainpipe (2SVEVDP04). This part is used as a condensation drain point for all vertical venting installations. This vertical drainpipe is installed inline with a vertical venting installation and will remove rain water and condensation that may come straight down the exhaust system. Z-Flex Z-Vent stainless steel vent pipe is ideal for the Bosch Therm 940ES / Bosch Therm 830ES / Bosch Therm 660EF / Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch Evolution 500 tankless water heaters as well as the legacy Bosch Pro 715ES / Bosch Pro 635ES / Bosch AquaStar 2400E / Bosch AquaStar 250SX heaters as well as the Bosch AquaStar 240FX, AquaStar 125FX, Takagi TK1, TK2, TKD20, TKJR, TK1S, TM1 tankless water heaters. Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.

    • ASIN: B0013L13NI
    • Brand: Z-Vent
    • ASIN: B0013L13NI
    • UPC: 663053029710
    • Part No: 2SVEVDP04

  • Noritz DT4-V Drip tee vertical condensation drain for 4" Stainless Steel vent pipe

    4" vertical drip tee for use with NORITZ Category III stainless steel vent pipe

    • ASIN: B008ORC8LA
    • Color: Iron
    • Brand: Noritz
    • ASIN: B008ORC8LA
    • UPC: 817000010263
    • Part No: DT4-V

  • Z-Flex Z-Vent 4" Vertical Condensation Drain Tee (2SVEVWCF04)

    Z-Flex Z-Vent 4" Vertical Condensation Drain Tee (2SVEVWCF04). This is the best piece to use as a condensation drain point for all vertical venting installations. This drain tee acts as a 90 degree angle, but it has a reservoir and a drain point to easily remove rain water and condensation that may come down the exhaust system. Z-Flex Z-Vent stainless steel vent pipe is ideal for the Bosch Therm 940ES / Bosch Therm 830ES / Bosch Therm 660EF / Bosch AquaStar 2700ES / Bosch AquaStar 2400ES / Bosch Evolution 500 tankless water heaters as well as the legacy Bosch Pro 715ES / Bosch Pro 635ES / Bosch AquaStar 2400E / Bosch AquaStar 250SX heaters as well as the Bosch AquaStar 240FX, AquaStar 125FX, Takagi TK1, TK2, TKD20, TKJR, TK1S, TM1 tankless water heaters. Z-Flex Z-Vent is rated AL29-4C and is approved for Category I (vertical only), II, III & IV applications and is designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure. Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.

    • ASIN: B00E5P5HVI
    • Brand: Z-Vent
    • ASIN: B00E5P5HVI
    • UPC: 663053021196
    • Part No: 2SVEVWCF04

  • Little Giant 554425 VCMA-20ULS Condensate Removal 1/30 HP Pump with Safety Switch

    Motor — 1/30 HP Discharge — 3/8" OD barbed Housing/tank cover — ABS Motor cover — ABS Volute — ABS Tank — ABS Impeller — Glass filled polypropylene Check valve — Acetal The VCMA-20ULS has a ½ gallon tank capacity. Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment. It is designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.

    • ASIN: B000SM342Q
    • Color: N/A
    • Brand: LITTLE GIANT
    • ASIN: B000SM342Q
    • UPC: 010121544253
    • Part No: VCMA-20ULS

  • Little Giant CV-10 Check Valve for VCC, VCM, VCMA and VCL-14/24, 1/4" MNPT x 3/8" ID vinyl tubing

    Specification:   Model Number: CV-10 Product Dimension: 6 x 4.5 x 0.5 inches Item Weight: 0.64 ounces The Little Giant CV-114/112 check valve model number 599059 is full flow designed. The sump pump check valve fits both 1-1/4 inch and 1-1/2 inch pipe. Full flow design passes 1 inch solids. The check valve has a slip x slip connection. This check valve is ABS construction. The sump pump check valve fits both 1-1/4 inch and 1-1/2 inch pipe. Full flow design passes 1 inch solids. Durable flapper design checks back flow of water and sewer gases. Flexible union slip over ABS, PVC or copper pipe. The easy slip fit design makes simple installation and it can be installed in vertical or horizontal line.

    • ASIN: B000WR50VA
    • Color: Original Version
    • Brand: LITTLE GIANT
    • ASIN: B000WR50VA
    • UPC: 663001043829
    • Part No: CV-10

  • Permatex 80050 Clear RTV Silicone Adhesive Sealant, 3 oz

    General-purpose, clear RTV indoor/outdoor sealant. Seals, bonds, repairs, mends, and secures glass, metal, plastics, fabric, vinyl, weather stripping, and vinyl tops. May be applied to horizontal or vertical surfaces. Waterproof and flexible. Temperature range -75°F to 400°F (-59°C to 204°C), resists water, weather, and vibration. Not recommended for windshield installation.

    • ASIN: B0002UEPVI
    • Color: Clear
    • Brand: Permatex
    • ASIN: B0002UEPVI
    • UPC: 686226800503
    • Part No: 80050

  • PneumaticPlus SAU3030M-N03G-MEP Three Stage Air Drying System - Air Particulate Filter, 0.3 Micron Coalescing Filter & Air Pressure Regulator Modular Combo 3/8" NPT - Manual Drain, Metal Bowl

    How It Works First, the air enter the particulate filter, which has 10 micron cleanable Polyethylene element. In this stage, corrosive moisture, pipe scale, dirt and rust are removed from air line protecting the precision part in the regulator. During Stage 2, fine filtration takes place. Here, 99.7 percentage of oil aerosols and microscopic particles down to 0.3 micron absolute are removed from the air. Third Stage, the air enter a high-performance regulator, which reduces primary pressure to a desired pressure setting. Installation Install units so the airflow is in the direction "IN-OUT" as indicated by arrow on the head of the unit. Install filter first in line of additional units such as regulators or lubricators, and as close as possible to the pneumatic tools or appliances being serviced. Unit must be installed in parallel from floor, downstream position for proper function. Do not install polycarbonate bowl in pressure that exceeds 150 PSI or where there is a presence of solvents harmful to polycarbonate. In these cases, use a metal bowl. The Unit can dis-assemble or assemble using a Phillips-head screwdriver or Allen wrench. An insert feature allows simple installation and removal in any location without disturbing the existing piping arrangement. The regulator can be mo...

    • ASIN: B01H7N4BV6
    • Brand: PneumaticPlus
    • ASIN: B01H7N4BV6
    • UPC: 841693104015
    • Part No: SAU3030M-N03G-MEP

  • Diversitech Corporation IQP-120 Condensate Pump 1.6 Gpm 120V Ac

    Diversitech is North America's largest manufacturer of equipment pads and a leading manufacturer and supplier of components to the HVACR industry.

    • ASIN: B003DKVODQ
    • Brand: Diversitech
    • ASIN: B003DKVODQ
    • UPC: 094714265930
    • Part No: IQP-120

  • Amerimax 51110 Solid Flex Drain Pipe, 4 in x 25 ft, PVC

    • ASIN:
    • Model: 51110
    • Color: Multicolor
    • Size: EA

  • Amerimax 4 In. Expandable Solid Drain Pipe

    • ASIN:
    • Model: 51710
    • Color: Multicolor
    • Size: 4 In. x 12 Ft.4

  • Dial Metal Black Drain and Pipe Kit

    • ASIN:
    • Model: T7631204
    • Color: Multicolor