Showing 1-10 of 799 results

Browse for Welding Cast Aluminum best prices at RankeDeal.com

  • Blue Demon BDTP-125-01T Triple Play Low Temp Aluminum-Zinc Brazing Rod 1/8" x 18" 1 Lb Tube,

    The perfect choice for a quick repair of all aluminum and zinc alloys.

    • ASIN: B01MCTUIUN
    • Brand: Blue Demon
    • ASIN: B01MCTUIUN
    • UPC: 652426008476
    • Part No: BDTP-125-01T

  • ER5356 - TIG Aluminum Welding Rod - 36" x 1/16" (1 LB)

    ER5356 - ROD - TIG (GTAW) - ALUMINUM AWS A5.10 Welding Positions: All INTRODUCTION: TIG welding rod, aluminum with 5% magnesium alloy for use on many weldable cast and wrought aluminum alloys. High strength, extremely resistant to corrosion, and resistant to sea water. Suitable for subsequent anodization. Generally recommended for welding any 5XXX or 6XXX series aluminum alloys USES: Materials: AlMg3, AlMg4,5, AlMg5, AlMgSi1, G-AlMg3, G-AlMg3, Architectural structures, Armored vehicles, Gun mount bases. CHEMICAL COMPOSITION (%): Chemical Composition Al Si Fe Cu Mn Requirement Balance ?0.25 ?0.4 ?0.1 0.05-0.2 Typical test result Balance 0.07 0.085 0.03 0.13 Chemical Composition Mg Zn Ti Be Cr Requirement 4.05-5.5 ?0.1 0.06-0.20 ?0.0003 0.05-0.2 Typical test result 4.84 0.002 0.015 0.0002 0.03 WELDING PARAMETERS (AC): Base Thickness Filler Wire Size Tungsten Amperage Argon (cfh) Gas Cup Size 1/16" 1/16" 1/16" 60-80 20 3/8" 3/32" 3/32" 3/32" 85-120 20 3/8" 1/8" 3/32" 3/32" 125-160 20 3/8" Shielding Gas: 100% Argon, Argon / Helium Mixtures The above parameters are for reference purpose and depend on diverse factors. Run tests, evaluate and set your welding parameters before starting the welding job.

    • ASIN: B01DTLYVOW
    • Brand: SÜA
    • ASIN: B01DTLYVOW
    • UPC: 685867900917
    • Part No: 5356R1x116

  • Walmeck 20PCS 2mm500mm Low Temperature Aluminum Welding Rod No Need Solder Powder

    Specification: Quantity:  20PCS  Material: Aluminum  Color: Silver Melting Point: 647℃~658℃  Diameter: 2mm / 0.08" Length: 500mm / 19.7"  Recommended for welding or brazing aluminum alloy: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005, and cast alloys 710.0 and 711.0  Item Wight: Approx. 3.5g / 0.12in (One Aluminum Welding Wire) Package Size: Approx.  51 * 1 * 1cm / 20.1 * 0.4 * 0.4in(20PCS) Package Weight:  Approx. 75g / 2.6in (20PCS)  How to Use: Step 1: Clean and polishe the physical surface. Step 2: Heat the surface of the base material, until the temperature of the wire to the operating temperature of 380℃~400℃, so you can rely on the parent metal heat transfer welding wire to form welds, should not use the flame to burn wire. Step 3: When repairing thin aluminum, as long as the aluminum base metal heated to the appropriate working temperature, and then use the wire back and forth friction melting to form a weld, only with a metal brush melt welding wire to weld at the weld. Step 4: Use propane gas to weld s mall object, natural slow cooling after welding.NOTE: 1. The surface of the base metal must be clean.  2. The base metal temperature to reach 400 degrees, including the process of welding the base metal temperature should be maint...

    • ASIN: B07KRB5WZ1
    • Brand: Walmeck-1
    • ASIN: B07KRB5WZ1
    • UPC: 768111810153
    • Part No: FFC0359646537575HG

  • Super Alloy 5 Aluminum Welding and Brazing Rod Kit (Full Kit 1/16 diameter)

    Standard shipping orders are shipped USPS Priority, signature may be required. Super Alloy 5 brazes aluminum at half the melting point of aluminum, with any torch: oxyacetylene, MAPP gas, natural gas, oxy-MAPP, or propane (parent metal MUST reach 600 degrees to flow rod. Oxyacetylene is required for large masses or thick aluminum--if you're unsure which torch you need, please email us before purchasing). The resulting bond is stronger than the parent metal (30,000 psi) and can be bent, drilled, anodized, machined, plated, tapped or threaded. Super Alloy 5 can be used to TIG weld all types of aluminum, and is especially effective with cast aluminum applications. Cast aluminum is a porous metal and can be difficult to weld without the proper tools. Super Alloy 5's powder flux chemically cleans cast aluminum, removes oil and impurities, and enables the welder to TIG weld aluminum without porosity or pinholes (using an oxyacetylene torch). Super Alloy 5 makes easy work of aluminum boat repair (using an oxyacetylene torch). ****************************** Note: An oxyacetylene torch is required for aluminum boats, cast aluminum, large aluminum masses, or diamond plate aluminum. If you're using a torch that will not heat the parent metal to 600°F, you're not using the product as direct...

    • ASIN: B07RLM67CB
    • Brand: Muggy Weld
    • ASIN: B07RLM67CB
    • UPC: 046728984345

  • ER4043 - MIG Aluminum Welding Wire - 1 Lb x 0.035" (4 SPOOLS)

    ER4043 - WIRE - MIG (GMAW) - ALUMINUM AWS A5.10 Welding Positions: All, except vertical down INTRODUCTION: MIG solid wire electrode with aluminum 5% silicon for welding heat-treatable base alloys and more specifically, 6XXX series alloys. Untreated low strength values. Resistant to hot cracks. Main areas of use are welds on cast aluminum. Not recommended for materials to be anodized. USES: Materials: AlSiMg, AlMgSi. For welding 6XXX alloys, and most casting alloys, Automotive components such as frame and drive shafts, Bicycle frames CHEMICAL COMPOSITION (%): Chemical Composition Al Si Fe Cu Mn Requirement Balance 4.5-6.0 ?0.8 ?0.3 ?0.05 Typical test result Balance 5.12 0.13 0.01 0.01 Chemical Composition Mg Zn Ti Be Requirement ?0.05 ?0.1 ?0.2 ?0.0003 Typical test result 0.03 0.002 0.007 0.0002 WELDING PARAMETERS (DC+): Diameter WFS (ipm) Amps Volts (lb/100 ft) Argon (cfh) 0.030" 480-626 60-175 15-24 0.65-1.25 25-30 0.035" 450-750 70-185 15-27 1.0-4.25 30-35 0.045" 330-500 125-260 20-29 1.0-4.25 35-45 1/16" 250-450 170-300 24-30 3.8-6.6 45-75 Shielding Gas: 100% Argon, Argon / Helium Mixtures The above parameters are for reference purpose and depend on diverse factors. Run tests, evaluate and set your welding parameters before starting the welding job.

    • ASIN: B01DTLYQ7E
    • Brand: SÜA
    • ASIN: B01DTLYQ7E
    • UPC: 685867900801
    • Part No: 4043W4x35

  • certainPL Low Temperature Aluminum Welding Rod No Need Solder Powder, 20"(1.6mm) (10Pcs)

    Storage: placed in a ventilated and dry place, can be stored for a long time   Size:50X0.16cm   Quantity: 10/20/50PCS    Material: Aluminum   Color: Silver   Melting Point: 647℃~658℃   Diameter: 1.6mm / 0.062"   Length: 500mm / 19.7"   Recommended for welding or brazing aluminum alloy: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005, and cast alloys 710.0 and 711.0   Item Wight: Approx. 2.5g   How to Use:   Step 1: Clean and polishe the physical surface.   Step 2: Heat the surface of the base material, until the temperature of the wire to the operating temperature of 380℃~400℃, so you can rely on the parent metal heat transfer welding wire to form welds, should not use the flame to burn wire.   Step 3: When repairing thin aluminum, as long as the aluminum base metal heated to the appropriate working temperature, and then use the wire back and forth friction melting to form a weld, only with a metal brush melt welding wire to weld at the weld.   Step 4: Use propane gas to weld s mall object, natural slow cooling after welding.   NOTE:   1. The surface of the base metal must be clean.   2. The base metal temperature to reach 400 degrees, including the process of welding the base metal temperature should be maintained a...

    • ASIN: B07PTZF8Y9
    • Color: Multicolor
    • Brand: certainPL
    • ASIN: B07PTZF8Y9
    • UPC: 767221343940
    • Part No: SP903618002A

  • Bernzomatic TS4000 Trigger Start Torch

    • ASIN: B00008ZA09
    • Brand: Bernzomatic
    • ASIN: B00008ZA09
    • UPC: 788809253307
    • Part No: GID-821167

  • certainPL Low Temperature Aluminum Welding Rod No Need Solder Powder, 20-Inch (50PCS)

    Storage: placed in a ventilated and dry place, can be stored for a long time Size:50X0.2cm Quantity: 10/20/50PCS Material: Aluminum Color: Silver Melting Point: 647℃~658℃ Diameter: 2mm / 0.078" Length: 500mm / 19.7" Recommended for welding or brazing aluminum alloy: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005, and cast alloys 710.0 and 711.0 Item Wight: Approx. 4g How to Use: Step 1: Clean and polishe the physical surface. Step 2: Heat the surface of the base material, until the temperature of the wire to the operating temperature of 380℃~400℃, so you can rely on the parent metal heat transfer welding wire to form welds, should not use the flame to burn wire. Step 3: When repairing thin aluminum, as long as the aluminum base metal heated to the appropriate working temperature, and then use the wire back and forth friction melting to form a weld, only with a metal brush melt welding wire to weld at the weld. Step 4: Use propane gas to weld s mall object, natural slow cooling after welding. NOTE:   1. The surface of the base metal must be clean.   2. The base metal temperature to reach 400 degrees, including the process of welding the base metal temperature should be maintained at 400℃, and the temperature can be high or low Pa...

    • ASIN: B07PTZ2M3J
    • Color: Multicolor
    • Brand: certainPL
    • ASIN: B07PTZ2M3J
    • UPC: 767221343902
    • Part No: SP90318003C

  • J-B Weld 8267 SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz.

    SteelStik is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to build up, patch and repair steel components. SteelStik sets in 3-5 minutes and after 60 minutes, can be drilled, tapped, machined, ground, filed and painted. SteelStik cures to a dark grey color, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300ºF.

    • ASIN: B00RN7CT2U
    • Brand: J-B Weld
    • ASIN: B00RN7CT2U
    • UPC: 043425267009
    • Part No: 8267

  • Weison Easy Aluminum Welding Rods Low Temperature - No Need Solder Powder (50PCS)

    Specification: Quantity: 10PCS / 20PCS / 50PCS (Optional) Material: Aluminum Color: Silver Melting Point: 647℃~658℃ Diameter: 2mm / 0.08" Length: 500mm / 19.7" Recommended for welding or brazing aluminum alloy: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005, and cast alloys 710.0 and 711.0 Item Wight: Approx. 3.5g / 0.12in (One Aluminum Welding Wire) Package Size: Approx. 51 * 0.5 * 0.5cm / 20.1 * 0.2 * 0.2in(10PCS) 51 * 1 * 1cm / 20.1 * 0.4 * 0.4in(20PCS) 51 * 3 * 3cm / 20.1 * 1.2 * 1.2in(50PCS) Package Weight: Approx. 40g / 1.4in (10PCS) Approx. 75g / 2.6in (20PCS) Approx. 185g / 6.5in (50PCS) How to Use: Step 1: Clean and polishe the physical surface. Step 2: Heat the surface of the base material, until the temperature of the wire to the operating temperature of 380℃~400℃, so you can rely on the parent metal heat transfer welding wire to form welds, should not use the flame to burn wire, When the surface temperature of the base metal is sufficient, the wire can flow well and penetrate into the metal capillary. Step 3: When repairing thin aluminum, as long as the aluminum base metal heated to the appropriate working temperature, and then use the wire back and forth friction melting to form a weld, only with a metal brush melt welding wire to weld at th...

    • ASIN: B07PGBBRRK
    • Color: 50PCS
    • Brand: Weison
    • ASIN: B07PGBBRRK
    • UPC: 749235231208